Drives

1395 Digital DC Drive

The 1395 is a microprocessor Digital DC Drive available in:

• Four quadrant, armature regenerative, two quadrant field:
• 1 to 300 HP @ 230VAC in standard 1395 enclosures
• 400 to 700 HP @ 230VAC in Bulletin 2100 CENTERLINE motor control centers (MCCs)
• 2 to 600 HP @ 460VAC in standard 1395 enclosures
• 700 to 1750 HP @ 460VAC in MCCs
• 750 to 2250 HP @ 575VAC in MCCs
• 750 to 2500 HP @ 660VAC in MCCs
• Non-regenerative:
• 1 to 30 HP and 125 to 300 HP @ 230VAC in standard 1395 enclosures; 400 to 700 HP @ 230VAC in MCCs.
• 2 to 60 HP and 250 to 600 HP @ 460VAC in standard 1395 enclosures; 700 to 1750 HP @ 460 VAC in MCCs.
• 750 to 2250HP @ 575VAC in MCCs
• 750 to 2500HP @ 660VAC in MCCs

NOTE: For information on 1395 drives packaged in MCCs, refer to publication 2361-5.01. This publication contains:

• supplementary information on 1395 drives rated up to 300HP @230VAC and 600HP @460VAC, specific to MCC installations.
• hardware descriptions of 1395 drives rated at or above 400 HP @ 230VAC, 700 HP @ 460VAC, 750HP @ 575/660VAC.

• Fused AC input
• DC Contactor
• Field regulation over a 6 to 1 speed range.
• AutoTuning
• Diagnostics
• Programmable Functions:
• Velocity Regulation or Torque Regulation
• Programmable Start / Stop mode
• Independent Acceleration/Deceleration adjustment
• 5 Preset Speeds, 2 Jog Speeds
• Current Limit, Tapered Current Limit
• MOP (Motor Operated Potentiometer) Function, Forward / Reverse
• 4 MOP Accel / Decel rates
• Process Trim
• Feedback Types:
  • Encoder
  • DC tachometer
  • Amature Voltage Feedback
• Protective Features:
• Instantaneous Overcurrent, Motor Overload
• Feedback Loss, Field Loss, Field Economy
• Open Chassis Construction
• UL Listed/CSA Approved
• Basic Input/Outputs

Options

• Hand Held / Enhanced Hand Held Programming Terminals
• DriveManager32 Software
• 120VAC Discrete Adapter Board Provides:
  • 4 Digital Inputs
  • 2 Digital Outputs, Contact type, Dry normally open
  • 4 Analog Inputs, 4 Analog Outputs, +/- 10VDC
• 24VDC Discrete Adapter Board Provides:
• 4 Digital Inputs
• 2 Digital Outputs, Contact type, Dry normally open
• 4 Analog Inputs, 4 Analog Outputs +/- 10VDC
• Digital Reference Adapter Board Provides:
  • 1 Digital Reference Input, Encoder type
  • 10 Discrete Inputs, 5 Discrete Outputs, 24VDC
  • 2 Analog Inputs +/-10VDC, 2 Analog Outputs +/-10VDC
• Node Adapter Board
  • Provides an interface between external (push buttons, pots) devices and the Bulletin 1395. The board allows the Bulletin 1395 to be controlled using an Allen-Bradley PLC from the PLC5 family, ControlLogix and, SLC 500.
• Multi-Communications Adapter Board
  • Contains the hardware necessary to connect the 1395 to Allen-Bradley's RIO or Data Highway Plus communication links.
• ControlNet Adapter
  • The CNA board provides a sophisticated interface to Allen-Bradley PLC controllers and other equipment capable of communicating over ControlNet.
  • One ControlNet channel, with a redundant connector to allow for backup connection in case one cable fails.
  • Compatible with all Allen-Bradley PLCs and other products that support Programmable Controller Communication Commands.
  • Compatible with Allen-Bradley 1395 Drives equipped with Version 8.10 or greater software.
  • Fiber Optic cables for noise immunity and speed
• Normally Closed DB contact on the main motor contactor.
• Auxiliary Contact on the motor contactor for special interlocks (1 - N.O., 1 - N.C.).