Drives

DriveTools™ SP Software v2.02 Network Connectivity

1. DPI compatible devices: PowerFlex 70, PowerFlex 700, PowerFlex 700S, PowerFlex_700S/DriveLogix, PowerFlex 7000. The PowerFlex_700S/DriveLogix is a DPI compatible device, however, additional NetLinx connection options are available. Therefore, both "DPI compatible device" and "PowerFlex_700S/DriveLogix" columns apply to the PowerFlex_700S/DriveLogix.
2. Options in the "PowerFlex_700S/DriveLogix" column only apply to PowerFlex 700S drives that have the DriveLogix controller installed. (3) SCANport compatible devices: 1305, 1336 PLUS, 1336 PLUS II, 1336 SPIDER, 1336 IMPACT™, 1336 FORCE™, 1336 REGEN, 1397, 1557, 2364F RGU, SMC™, and SMP™. The 1336 FORCE is a SCANport compatible device, however, additional connection options are available. Therefore, both "SCANport compatible device" and "1336 FORCE" columns apply to the 1336 FORCE drive.
3. A total of two supported modems are required, one at the drive and one at the PC. The 1203-RAD kit contains two modems; the 1203-RAD1 kit contains one modem.
4. 1336 FORCE drives with firmware version 2.xx or later are supported.
5. Not recommended due to limited bandwidth in the 1770-KFD causing slower communication performance.
6. DSI compatible devices: PowerFlex 4/40. Some DSI products do not support network adapters.

DriveObserver, DriveExecutive, DriveTools, DriveManager32, DriveExplorer, SCANport, DPI, PowerFlex, SMC, DataHighway Plus, RSLogix, RSLinx, RSNetworx and RSWho are trademarks of Rockwell Automation. Trademarks not belonging to Rockwell Automation are property of their respective companies.