Catalogs > Automation Systems Catalog > I/O > In-Cabinet Distributed I/O > 1734 POINT I/O
1734 POINT I/O
| Introduction |  |
Product Design | |
Environmentals and Certifications | |
I/O Adapter and Communication Interface Modules | |
1734D POINTBlock I/O Modules | |
| Digital I/O Modules | |
Analog I/O Modules | |
Specialty I/O Modules | |
Power Supplies | |
Terminal Base Assemblies and RTBs | |
All POINT I/O modules are powered from the backplane by a POINT I/O adapter module, which includes a built-in power supply, or an expansion power supply. For POINT I/O adapters power specifications see I/O Adapter and Communication Interface Modules.
Expansion Power Unit
The POINT I/O Expansion Power Supplies extend the backplane bus power and create a new field voltage partition segment for driving field devices for up to 17 I/O modules, depending on the current required for each module and the DIN-rail mounting position. The expansion power unit separates field power from I/O modules to the left of the unit, effectively providing functional and logical partitioning for:
- Separating field power between input and output modules.
- Separating field power to the analog and digital modules.
- Grouping modules to perform a specific task or function.
| Cat. No. | Input Voltage | Field Side Power Requirements, Max. | Inrush Current, Max. | PointBus Output Current Rating | Power Consumption, Max. | Power Dissipation, Max. |
| 1734-EP24DC | 24V DC (10…28.8V DC) | 400 mA @ 24V DC (+20% = 28.8V DC max) | 6 A for 10 ms | Horizontal mounting: 1 A @ 5V DC for 10…19.2V input; 1.3 A @ 5V DC for 19.2…28.8V input Vertical mounting: 1 A @ 5V DC for 10…28.8V input |
9.8 W @ 28.8V DC | 3.0 W @ 28.8V DC |
| 1734-EPAC | 120/240V AC (85…264V AC) | 200 mA @ 120V AC, 100 mA @ 240V AC | 2 A for 6 ms | Horizontal mounting: 1.3 A @ 5.2V DC Vertical mounting: 1.0 A @ 5.2V DC |
15.1 W @ 264V AC | 8.4 W @ 264V AC |
Field Power Distributor
The POINT I/O Field Power Distributor Module (1734-FPD) passes through all POINT I/O backplane signals, but does not provide additional POINTBus backplane power. The field power distributor gives you the ability to change the field power distribution source for I/O modules to the right of the field power distributor. This facilitates logical or functional partitioning of low-channel count, high I/O mix applications using any of the communication adapters. Use the field power distributor with a broad range of voltage inputs including 5V DC to 250V DC and/or 24V AC to 240V AC applications and I/O modules.
| Cat. No. | Operating Voltage Range |
| 1734-FPD | 10…28.8V DC 120V/240V AC |