| Cat. No.
|
Description
|
| 1797-CE1S
|
FLEX Ex Bus Isolator Extender Cable, 0.3 m (1 ft)
|
Connects a bus isolator inside an explosion-proof or purged enclosure to a Flexbus feed-through connector.
|
| 1797-CE3S
|
FLEX Ex Bus Isolator Extender Cable, 0.9 m (3 ft)
|
Connects a bus isolator inside an explosion-proof or purged enclosure to a Flexbus feed-through connector.
|
| 1794-CE1
|
FLEX I/O 1 ft Extender Cable, 0.3 m (1 ft)
|
Connects two rows of FLEX Ex modules.
|
| 1794-CE3
|
FLEX I/O 3 ft Extender Cable, 0.9 m (3 ft)
|
Connects two rows of FLEX Ex modules.
|
|
|
| Cat. No.
|
Description
|
| 1797-TPS
|
ControlNet Ex Straight T-Tap
|
For a ControlNet Ex coax segment in a hazardous location.
|
| 1797-TPR
|
ControlNet Ex Right-Angle T-Tap
|
For a ControlNet Ex coax segment in a hazardous location.
|
| 1797-TPYS
|
ControlNet Ex Straight Y-Tap
|
For a ControlNet Ex coax segment in a hazardous location.
|
| 1797-TPYR
|
ControlNet Ex Right-Angle Y-Tap
|
For a ControlNet Ex coax segment in a hazardous location.
|
| 1797-XT
|
ControlNet Ex 75W Terminator
|
For a ControlNet Ex coax segment in a hazardous location. (Qty. 50)
|
| 1797-TCAP
|
ControlNet Tap Terminator
|
Capacitor terminator for a ControlNet Ex coax tap in a hazardous location. (Qty. 5)
|
|
|
| Cat. No.
|
Description
|
| 1797-BOOT
|
ControlNet Ex BNC Boot
|
Boots to insulate ControlNet BNC connectors in the hazardous location. (Qty. 50)
|
| 1797-INS
|
ControlNet Ex Trunk Insulators Kit
|
A set of 5 different types of ControlNet insulators (including a BNC boot) for a hazardous location.
|
| 1797-EXMK
|
FLEX Ex Cable Marking Kit
|
Used to tag the ControlNet cable in the hazardous area as carrying IS signals.
|
|
|
