Catalogs > Automation Systems Catalog > I/O > On-Machine Distributed I/O > 1732D/E/P ArmorBlock and Armor WeldBlock I/O
1732D/E/P ArmorBlock and Armor WeldBlock I/O
| Introduction |  |
Product Design | |
Typical Configurations | |
General Specifications | |
ArmorBlock 24V DC I/O Blocks | |
Armor WeldBlock 24V DC I/O Blocks | |
Mating Cables | |
|
|
|
ArmorBlock I/O
The 1732 ArmorBlock® I/O family features space-saving, inexpensive, sealed-housing digital I/O blocks suitable for On-Machine™ mounting. 1732 ArmorBlock I/O is available for DeviceNet™, EtherNet/IP™, and PROFIBUS™ communication networks. Armor™ WeldBlock I/O modules are suited for use in typical welding applications. Up to sixteen 24V DC points can be addressed per node. A secondary enclosure is not necessary to house these modules.
Benefits
- Sealed housing rated for IP69K and NEMA 4X (when marked) eliminate enclosure costs.
- Industry-standard connectors lower installation costs and let you replace blocks without rewiring
- Mini or M12 DC micro connectors are used for connection to the DeviceNet network and auxiliary power supply.
- I/O connectors are sealed M8 pico or M12 DC micro styles, some with quick connect terminations.
- Mini or M12 DC micro connectors are used for connection to the DeviceNet network and auxiliary power supply.
- 8- and 16-point self-configuring I/O allows the input/output mix to a granularity of one.
- Dual-port EtherNet/IP, configured as an embedded switch, supports linear and ring topologies.
- Isolated auxiliary power maintains power to the outputs if the main power fails so that you can have the option of holding outputs in their last state.
- Outputs are protected by electronic fusing.
- Complies with Open DeviceNet Vendor Association, Inc. (ODVA) conformance test software.