Catalogs > Automation Systems Catalog > I/O > On-Machine Distributed I/O > 1738 ArmorPoint I/O
1738 ArmorPoint I/O
| Introduction |  |
Product Design | |
Environmentals and Certifications | |
Communication Adapter Modules | |
Digital DC I/O Modules | |
| Digital AC I/O Modules | |
Analog I/O Modules | |
Specialty I/O Modules | |
Power Supplies | |
Accessories | |
ArmorPoint 25-pin D-sub Connector Interface Cable
| Cat. No. | Description |
| 1738-CBL3M25DS | ArmorPoint 1 m (3.28 ft) cable assembly with 25-pin D-sub male connector. The other end of the cable consists of loose wires for connecting to a pneumatic valve interface. Compatible with 1738-OB16E25DS module. |
Bus Extension Bases (1738-EXT1, 1738-EXT3)
An ArmorPoint I/O bus extension base allows the backplane to be extended to additional I/O or the ArmorStart IP 67 motor starter. May require the addition of an auxiliary power module. Refer to the installation manual (publication 1738–IN018A) to determine if a 1738–EP24DC or 1738–FPD is needed after a bus extension base.
|
ArmorPoint Bus Extension Bases
| Cat. No. | Description |
| 1738-EXT1 | ArmorPoint 1 meter bus extension base |
| 1738-EXT3 | ArmorPoint 3 meter bus extension base |
ArmorPoint to ArmorStart Bus Extension Bases
| Cat. No. | Description |
| 280A-EXT1 | ArmorPoint to ArmorStart 1 meter bus extension base |