HMI Enclosures
ViewPort Operator Interface Enclosures
|
|
|
The ViewPort Operator Interface Enclosures are tabletop, wall, overhead, and pedestal-mount enclosures designed to house PanelView terminals in harsh environments. Each ViewPort enclosure comes fully assembled with the selected PanelView terminal already installed.
Benefits
- Adjustable tilt assembly allows up to 30° of movement and includes a locking disk to maintain the desired viewing angle.
- Swivel assembly provides for 180° of horizontal rotation.
- Base plate with rubber feet provides anchor-free table top mounting.
- A universal mounting trunnion provides for wall or overhead mounting.
- Thumbscrews on removable front plate and rear panel provide easy access.
- Handles on front plate allow for quick removal of the PanelView terminal for servicing.
- Removable rear panel facilitates direct power and communication wire termination.
- Optional gasketed cable-way simplifies field installation by eliminating the need for conduit knock-outs.
Product Design
The 1891-VP1 series enclosures are designed to house PanelView 550 and 600 terminals. The 1891-VP2 series enclosures are designed to house PanelView 1000 and 1000e terminals. The enclosures are either 14/16 gauge steel (NEMA 4) painted with a textured light gray finish or type 304 stainless steel (NEMA 4X). The double-hinged body (with side-mount slotted latch to secure sections) helps simplify installation and provides easy access for maintenance.
The 1891-VP4 series are designed to house PanelView 1400 and 1400e terminals. The enclosures are either aluminum (NEMA 4) or stainless steel (NEMA 4x). An optional Z-purge is available for hazardous environments such as Class I, Division 2 areas.
1891-VP1 and -VP2 Series Enclosures
Specifications
Industry standards include: UL Type 4, UL Type 4X, (NEMA 4, NEMA 4X), CSA, IEC Type IP66, CE Certified.
| Cat. No.¬ | Dimensions (HxWxD), Approx. |
Weight of Enclosure (without PanelView) |
Material / Finish |
| 1891-VP10H0 | 30.5 x 38 x 22.5 cm (12 x 15 x 8.86 in) |
9.08 kg (20 lb) |
14 gauge steel front body 16 gauge steel rear body Textured light gray |
| 1891-VP10F0T | |||
| 1891-VP10T0 | |||
| 1891-VP10B0 | |||
| 1891-VP1XH0 | 15 kg (33 lb) |
14 gauge Type 304 SS front body 16 gauge Type 304 SS rear body Stainless steel |
|
| 1891-VP1XF0T | |||
| 1891-VP1XT0 | |||
| 1891-VP1XB0 | |||
| 1891-VP20H0 | 40.6 x 50.8 x 22.5 cm (16 x 20 x 8.86 in) |
11.35 kg (25 lb) |
14 gauge steel front body 16 gauge steel rear body Textured light gray |
| 1891-VP20F0T | |||
| 1891 -VP20T0 | |||
| 1891-VP20B0 | |||
| 1891-VP2XH0 | 17.25 kg (38 lb) |
14 gauge Type 304 SS front body 16 gauge Type 304 SS rear body Stainless steel |
|
| 1891-VP2XF0T | |||
| 1891-VP2XT0 | |||
| 1891-VP2XB0 | |||
| ¬ External cooling is not required if ambient temperature does not exceed 40.5 °C (105 °F). T The mounting feet on the sides of the enclosure add two inches to its width. |
|||
ViewPort Enclosures 1891-VP1, -VP2 Series
Each ViewPort enclosure comes fully assembled with the selected PanelView terminal already installed. When placing an order, two catalog numbers should be specified: one for the ViewPort enclosure (see tables below) and another for the PanelView Operator Terminal.
ViewPort / PanelView assemblies are not available via the Passport Order Entry System. Distributors should fax or e-mail orders directly to the Flex Factory Solutions Team.
Catalog Number Configuration Model
| 1891-VP | — | — | — | — | ||||
| 1 | 2 | 3 | 4 |
| Position Description | Options | |
| 1 ViewPort series | 1 | Houses PanelView 550 or 600 |
| 2 | Houses PanelView 1000 or 1000e | |
| 2 ViewPort Housing | 0 | 14/16 gauge steel (NEMA 4) |
| X | Stainless steel (NEMA 4X) | |
| 3 Mounting Options | H | Internal rear mounting holes |
| F | External mounting feet | |
| T | Top pendant arm mounting provision | |
| B | Bottom pendant / pedestal mounting provision | |
| 4 Not In Use | 0 | Default, no option available |
1891-VP1, -VP2 Series Options
| Cat. No. | Description |
| 1891-PED12 | Bolt-down pedestal, 33 inches high, 4 inches square, textured light gray |
| 1891-ST12¬ | Swivel / tilt assembly, 350 ° rotation, tilt ± 30 ° from horizontal |
| 1891-S12¬ | Swivel assembly, 350 ° rotation |
| 1891-PED12X | Stainless steel, bolt-down pedestal, 39 inches high, with coupling and rotating base bracket (300 ° of horizontal rotation) |
| ¬ Swivel assembly and swivel/tilt assemblies are cast aluminum with anodized finish | |
1891-VP4 Series Enclosures
Specifications
| Cat. No.T | 1891-VP4000 | 1891-VP40G0 | 1891-VP4X00 | 1891-VP400Z¬ | 1891-VP4X0Z¬ |
| Weight (without PanelView) | 40.9 kg (90 lb) | 54.5 kg (120 lb) | |||
| Internal Material | Aluminum | ||||
| External Material | Painted aluminum [Paint: S-W Polane T-Plus, Textured (charcoal gray)] | Stainless steel | Painted aluminum [Paint: S-W Polane T-Plus, Textured (charcoal gray)] | Stainless steel | |
| Z-purge Pneumatic | — | •Inert gas supply requirements of 80 to 100 PSI. •Approximate air/gas consumption: - Normal operation: 7…10 SCFH - Rapid exchange: 240 SCFH for 10 min. - Average enclosure pressure 0.25…0.50 in. |
|||
| Z-purge Electrical | — | •120V, 60 Hz, 15A max. •Internal 4-outlet surge suppressor •Alarm contact, 15A max. |
|||
| ¬ The Z-purge version of the Viewport enclosure (catalog number 1891-VP400Z or -VP4X0Z) is Factory Mutual Research Approved with only the keypad version of the PanelView 1400 and 1400e terminals rated for Class I, II, Division 2; Groups A, B, C, D, E, F, G. Please be aware that Class II, Group E must be rated as Division 1. T External cooling is not required if ambient temperature does not exceed 43 °C (110 °F). |
|||||
ViewPort Enclosures 1891-VP4 Series
Each ViewPort enclosure comes fully assembled with the selected PanelView terminal already installed. When placing an order, two catalog numbers should be specified: one for the ViewPort enclosure (see following tables) and another for the PanelView Operator Terminal.
ViewPort / PanelView assemblies are not available via the Passport Order Entry System. Distributors should fax or e-mail orders directly to the Flex Factory Solutions Team.
Catalog Number Configuration Model
| 1891-VP4 | — | — | — | |||
| 1 | 2 | 3 |
| Position Description | Options | |
| 1 ViewPort housing | 0 | Aluminum housing (NEMA 12/4) |
| 1 ViewPort housing | X | Stainless steel housing (NEMA 4x) |
| 2 Cable entry plate¬ | 0 | Conduit knock-out |
| G | Gasketed cable-way | |
| 3 Optional purgingT | 0 | No purge |
| Z | Z-purge | |
| ¬ The conduit knock-out plate is required for NEMA 4, NEMA 4x, and Z-purge installations. The gasketed cable-way reduces the overall ViewPort enclosure rating to NEMA 12. T Z-purging is for Class I, Division 2 environments. Touch-screen PanelView terminals are not suitable for Class I, Division 2 environments. |
||
1891-VP4 Series Options
| Cat. No. | Description |
| 1891-PED | Steel fixed mounting pedestal - 97 cm (38 in) high, 43 kg (95 lb), 12 x 12 in base plate and four 0.5 in diameter mounting holes |
| 1891-PEDX | Stainless Steel fixed mounting pedestal - 97 cm (38 in) high, 43 kg (95 lb), 12 x 12 in base plate and four 0.5 in diameter mounting holes |