Catalogs > Automation Systems Catalog > Networks and Communication > Switches
Switches
| Introduction |  |
Environmentals and Certifications | |
Stratix 8300 Modular Managed Switches | |
Stratix 8000 Modular Managed Switches | |
| Stratix 6000 Fixed Managed Switches | |
Stratix 2000 Unmanaged Switches | |
Embedded Switch Technology | |
Accessories | |
|
The Embedded Switch Technology embeds popular switch features directly into your hardware to support high performance applications, without the need for additional configuration. This technology enables linear and device-level ring topologies for EtherNet/IP applications.
Features
- Optimized for EtherNet/IP I/O and motion applications
- Supports IEEE 1588 precision time protocol (PTP) for precise time synchronization and Quality of Service (QoS) to help prioritize data transmission
- Typical recovery rate for a 50-node device-level ring is less than 3 ms
- Fast recovery rate makes failures appear transparent to most devices on the network
- Machines often continue operations without any system interruptions
- Fast recovery rate makes failures appear transparent to most devices on the network
- Open standard technology available to 3rd party vendors allows EtherNet/IP interoperability
|
|
| Embedded switch technology products from Rockwell Automation support additional EtherNet/IP topology options, such as device-level ring and linear, for your application. | |
Product Selection
The 1783-ETAP modules enable single port devices to connect to a ring or linear topology.
| Cat. No. | Description | |
| 1783-ETAP | EtherNet/IP Tap 3 copper ports |
|
| 1783-ETAP1F | EtherNet/IP Tap 2 copper ports, 1 fiber port |
|
| 1783-ETAP2F | EtherNet/IP Tap 1 copper port, 2 fiber ports |
|
Accessories
See the Accessories tab for information on SFP transceivers and Ethernet cables.
Technical Specifications
| 1783-ETAP | 1783-ETAP1F | 1783-ETAP2F | |
| Ports per Module | 3 | 3 | |
| Copper Ports | 3 10/100 Mbps, full or half duplex | 2 10/100 Mbps, full or half duplex | 1 10/100 Mbps, full or half duplex |
| Fiber Ports | — | 1 100 Base-FX port multimode, with LC connector | 2 100 Base-FX port multimode, with LC connector |
| CompactFlash Memory | No | ||
| Power Requirements | 24V DC (20.4…27.6V DC) | ||
| Current Consumption, Max. | 125 mA @ 24V DC | 200 mA @ 24V DC | 260 mA @ 24V DC |
| Power Consumption, Max. | 3 W | 4.8 W | 6.24 W |
| Fiber Optic Ethernet Data Rate | — | 100 Mbps | |
| Fiber Optic Link Budget | — | 12.8 dB for 62.5/125 mm multimode fiber 9.3 dB for 50/125 mm multimode fiber |
|
| Fiber Optic Cable Length, Max | — | Graded index multimode fiber; 2000 m | |
| Fiber Optic Connector Type | — | LC | |
Key Software Features
| Feature | Benefit |
| RSLogix 5000 AOP (Add On Profile) | Enables easy switch setup and diagnostics with Logix controllers and the Integrated Architecture |
| VLAN (Virtual LAN) with trunking | Helps ease network management in the production network |
| QoS (Quality of Service) | Enables prioritization of applications, users, or data flows to help provide a higher level of network predictability |
| Bandwidth Threshold Alarming | Supports alarms to track network changes and detect malfunctioning devices |
| STP/RSTP (Spanning Tree Protocol/Rapid Spanning Tree Protocol) | Provides a resilient path between switches for applications that require a fault-tolerant network |
| DLR (Device-level Ring) | Supports a resilient ring network at the device level without external switching hardware, providing fast recovery rates for real-time control applications |
| CIP Sync (IEEE 1588) | Supports very high precision clock synchronization across automation devices for time-critical tasks such as accurate alarming for post-event diagnostics and precision motion |
| IGMP (Internet Group Management Protocol) Snooping and Querier | Reduces multicast traffic from intensive IP applications, such as I/O control on EtherNet/IP |
Additional Products with Embedded Switch Technology
| Cat. No. | Description | |
| 1756-EN2TR | ControlLogix 2-Port EtherNet/IP Communication Module |
|
| 1734-AENTR | POINT I/O 2-Port EtherNet/IP Adapter |
|
| 1738-AENTR | ArmorPoint I/O 2-Port EtherNet/IP Adapter |
|