Catalogs > Automation Systems Catalog > Programmable Controllers > Pico Controllers > PicoGFX Controllers
PicoGFX Controllers
| Introduction |  |
Product Design | |
Specifications | |
Programming | |
| PicoGFX Controllers | |
Expansion I/O | |
Accessory Products | |
Additional Resources | |
DeviceNet Communications Module
The PicoGFX DeviceNet module allows you to have a PicoGFX controller as a slave device on the DeviceNet network. It connects to the PicoGFX controller like an expansion I/O module. It can be used with the Pico 18- and 20- point controllers and the PicoGFX controller. 24V DC power must be provided to the device.
| Cat. No. | Description |
| 1760-DNET | PicoGFX DeviceNet Communications Module |
Memory Module
Information stored on the memory module is non-volatile. Use the module to archive, transfer, and copy your circuit diagram. Each memory module can store one program. It stores the program, visualization data, and all parameter settings of the circuit diagram.
| Cat. No. | Description |
| 1760-MM3 | 256K Memory Module |
Remote Processor
The remote processor is used for terminal mode operation of PicoGFX controllers and I/O modules. Use the remote mounting processor with Pico controllers, PicoGFX expansion I/O, and PicoGFX controllers. Perform text messaging and make data adjustments using the display/keypad unit.
| Cat. No. | Description |
| 1760-RM-GFX | PicoGFX Remote Processor Unit |
Protective Covers for PicoGFX Display Unit
| Cat. No. | Description | Dimensions (W x H x D), Approx. | |
| 1760-NDM | Protective Membrane | For use in applications such as in the food industry; protects keyboard from dust, liquids, etc. | 88.5 x 88.5 x 25 mm (3.48 x 3.48 x 0.98 in) |
| 1760-NDC | Protective Cover | For use in aggressive environments to protect against mechanical damage; maintains protection to IP65. Protective cover can be sealed to prevent unauthorized access. | 86.5 x 95 x 25 mm (3.41 x 3.74 x 0.98 in) |
Point-to-Point Serial Interface Cables
| Cat. No. | Description |
| 1760-CBL-2M | Point-to-Point Serial Interface Cable, 2m (6.6 ft) |
| 1760-CBL-5M | Point-to-Point Serial Interface Cable, 5m (16.4 ft) |
Pico-Link Cables
| Cat. No. | Description | Qty. per Package |
| 1760-CBL-INT01 | Pico-Link Cable, 0.3m (1 ft) | 5 |
| 1760-CBL-INT03 | Pico-Link Cable 0.8m (2.6 ft) | 3 |
| 1760-CBL-INT05 | Pico-Link Cable 1.5 m (5 ft) | 2 |
| 1760-CBL-INT300 | Pico-Link Cable, non-terminated, 100m (300 ft) | 1 |
| 1760-CONN-RJ45 | Connectors for Pico-Link Cable | 2 |
| 1760-TERM1 | Network Termination Resistor | 2 |
Power Supply
The 24V DC power supply is sized to provide enough power for any standard Pico or PicoGFX system. Line power can be 100 to 240V AC or 85 to 375V DC.
| Cat. No. | Input Voltage | Output Power | Output Voltage | Rated Output Current | Dimensions (W x H x D), Approx. |
| 1606-XLP30E | • 100…240V AC, 47…63 Hz • 85…375V DC |
30 W | 24…28V DC | • 1.3 A @ 24.5V • 1 A @ 28 V |
45 x 75 x 91mm (1.77 x 2.95 x 3.58 in) |
Mounting and Installation
| Cat. No. | Description | Qty. per Package |
| 1760-NMF | Mounting Feet (for panel mounting processors and I/O modules)⋆ | 8 |
| 1492-N90 | Terminal Block Screwdriver | 5 |
| 1492-KWC | Wire Cutter (mounts on 1492-N90 screwdriver) | 1 |
| ⋆ Three mounting feet are sufficient for a device with four mounting points. | ||