Catalogs > Automation Systems Catalog > Programmable Controllers > GuardPLC Safety Control System > GuardPLC 1800 Safety Controller
GuardPLC 1800 Safety Controller
Specifications
General Specifications
The following specifications are common to all GuardPLC products unless indicated.
| Operating Temperature | 0…60 °C (32…140 °F) |
| Nonoperating Temperature | -40…85 °C (-40…185 °F) without backup battery |
| Relative Humidity | 95% |
| Vibration | 1 g at 10…150 Hz |
| Operating Shock | 15 g |
Certifications
(When product is marked.)
| Certifications | GuardPLC 1600, GuardPLC 1800, and 1753 I/O |
| c-UL-us | c-UL Listed Industrial Control Equipment. |
| CE | European Union 2004/108/EC EMC Directive, compliant with: EN 61326-1; Meas./Control/Lab., Industrial Requirements EN 61000-6-2; Industrial Immunity EN 61000-6-4; Industrial Emissions EN 61131-2; Programmable Controllers (Clause 8, Zone A & B) |
| C-Tick |
Australian Radiocommunications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions |
| Functional Safety | certified by TÜV up to SIL 3, and PLe/Cat. 4 |
GuardPLC 1800 Controller Specifications
| Cat. No. | 1753-L32BBBM8A | 1753-L32BBBP8A |
| Application Memory | 250 KB | |
| User Program Memory | 250 Kbytes | |
| User Memory | 500 | |
| Current Consumption | 9 A with maximum load 0.75 A idle current (controller only) |
|
| Operating Voltage Range | 24V DC, -15% to +20%, wss £ 15%⋆ | |
| Communication Ports | 4 Ethernet 10/100BaseT ports 1 9-pin D-shell RS-485 port (Modbus Slave) 1 9-pin D-shell RS-485 port (GuardPLC ASCII) 1 9-pin D-shell Comm port (unused) |
4 Ethernet 10/100BaseT ports 1 9-pin D-shell RS-485 port (PROFIBUS DP Slave) 1 9-pin D-shell RS-485 port (GuardPLC ASCII) 1 9-pin D-shell Comm port (unused) |
| Ethernet Port | 4 RJ-45 | |
| EtherNet/IP Communication Rate | 10/100 Mbps | |
| Enclosure Protection | IP20 | |
| Digital Inputs | ||
| Number of Digital Inputs | 24 safety‡ | |
| Voltage, On-State Input, Max. | 30V DC | |
| Voltage, On-State Input, Nom. | 24V DC | |
| Digital Outputs | ||
| Number of Digital Outputs | 8 safety‡ | |
| Current, On-State Output, per Channel | Channels 1…3; 5…7: 0.5 A at 60 °C (140 °F) Channels 4 and 8: 1 A at 60 °C (140 °F); 2 A at 50 °C (122 °C) |
|
| Voltage, On-State Output, Max. | Supply Voltage (L+) | |
| Voltage, On-State Output, Min. | Supply Voltage (L+) minus 2V | |
| Voltage, On-State Output, Nom. | 24V DC | |
| Counters | ||
| Number of Counters | 2 safety‡ | |
| Counter Resolution, Bits | 24 bits | |
| Counting Frequency (kHz), Max. | 100 | |
| Inputs per Counter | 3 (A, B, Z) | |
| Analog Inputs | ||
| Number of Analog Inputs | 8 safety§ | |
| Input Resolution | 12-bit | |
| Input Signal Range | 0…10V DC (nominal); -0.1…11.5V DC (service value) 0…20 mA (nominal); 0.4…23 mA (service value)♣ |
|
| Absolute Accuracy | 0.1% at 25 °C (77 °F) 0.5% at 60 °C (140 °F) |
|
| Safety Accuracy | ± 2% | |
| General | ||
| Dimensions (HxWxD), Metric | 114 x 257 x 81 mm∆ | |
| Dimensions (HxWxD), Imperial | 4.49 x 10.1 x 3.19 in.∆ | |
| ⋆ From a power supply with protective separation conforming to IEC 61131-2 requirements. ‡ Not electrically isolated. § Unipolar, not electrically isolated. ♣ With 500 W shunt. ∆ Height including latch; width including housing screws; depth including grounding bolt and shield plate. |
||