Catalogs > Automation Systems Catalog > Programmable Controllers > GuardPLC Safety Control System > GuardPLC 2000 Safety Controller
GuardPLC 2000 Safety Controller
Product Design
The GuardPLC 2000 controller consists of a rack, power supply, CPU with communication ports and I/O modules. As many as six I/O modules may be added to the basic GuardPLC 2000 system, including digital input and output channels and analog input and output channels. All I/O can be tested by the CPU to provide system integrity. The GuardPLC 2000 system can provide as many as 144 digital inputs and 96 digital outputs. Programming is accomplished with the RSLogix Guard PLUS! Programming and Configuration Software.
The GuardPLC 2000 CPU has one 10/100BaseT Ethernet port for programming and peer-to-peer communications and two RS-232 interface ports (9-pin D-shell) for ASCII. The CPU controls all functions of the GuardPLC 2000 system as well as communication to other systems. LEDs display the operating modes: Run and Error for the I/O modules; Run, Error, Stop, Programming and Forcing for the CPU.
Features
- Metal chassis.
- I/O self test.
- 24V dc digital I/O.
- Expandable number of I/O.
- Multiple I/O test points.
- Certified by TÜV for use in applications up to SIL 3 according to IEC 61508; EN 954-1, Category 4.
- Programmed with RSLogix Guard PLUS! Software.
- RS-232 port for ASCII communication (read only).
- Ethernet port for programming and configuration.