DeviceNet Safety Scanner

DeviceNet Safety Scanner

Click to enlarge - Safety Scanner Angle


The 1753-DNSI scanner provides DeviceNet network access for GuardPLC 1600 and GuardPLC 1800 controllers. The scanner supports both CIP Standard and CIP Safety DeviceNet communication to DeviceNet safety I/O as well as to standard PLCs, standard I/O, and HMIs. The scanner reads and writes data from DeviceNet nodes and exchanges this data and status information with the GuardPLC controller. Using its target mode, the scanner can look like I/O to standard PLCs or HMIs, allowing the GuardPLC controller to send status and diagnostic data to the standard control system. Use RSNetWorx Software for DeviceNet to configure the DeviceNet Safety Scanner. See RSNetWorx for DeviceNet Software software for more information.

Benefits


DeviceNet Safety Scanner Specifications

Cat. No. 1753-DNSI
Description DeviceNet Safety Scanner for GuardPLC Controllers
Power Consumption 10 W
DeviceNet Current (mA) 90 mA
Overload Protection Shutdown of the concerned output with cyclic reconnecting
Cable Type 1753-CBLDN (ships with the 1753-DNSI)
Isolation Voltage 30V continuous
Tested at 710V DC for 60 seconds
Enclosure Type Rating none (open-style)
Weight, Metric 366 g
Weight, Imperial 0.805 lb
Dimensions (HxWxD), Metric 115 x 110 x 87 mm¬ 
Dimensions (HxWxD), Imperial 4.51 x 4.33 x 3.43 in¬ 
Temperature, operating 0…60 °C (32…140 °F)
Temperature, nonoperating -40…85 °C (-40…185 °F)
Relative Humidity 10…95% noncondensing
Vibration 2 g at 10…500 Hz
Shock, operating 30 g
Shock, nonoperating 50 g
 
¬ Height includes connectors.