Catalogs > Automation Systems Catalog > Programmable Controllers > FlexLogix System > RSLogix 5000 Programming Software
RSLogix 5000 Programming Software
| Introduction |  |
RSLogix 5000 Programming Software | |
RSLinx Software | |
RSNetWorx Software | |
RSLogix Emulate 5000 Software | |
|
|
|
RSNetWorx Software
RSNetWorx software is the configuration tool for your control network. With RSNetWorx software you can create a graphical representation of your network configuration and configure the parameters that define your network.
Use RSNetWorx software for:
- ControlNet software to schedule network components. The software automatically calculates network bandwidth for the entire network, as well as the bandwidth used by each network component. You must have RSNetWorx software to configure and schedule ControlNet networks.
- DeviceNet software to configure DeviceNet I/O devices and create a scan list. The DeviceNet scanner stores the configuration information and scan list.
- EtherNet/IP software to configure EtherNet/IP devices using IP addresses or host names.
|
|
RSNetWorx Software Requirements
RSNetWorx software can be used with these operating systems:
- Microsoft Windows Vista
- Microsoft Windows XP
- Microsoft Windows 2000
In some cases, RSNetWorx software comes bundled with controller programming software packages.
RSNetWorx Software Packages
| Cat. No. | Description |
| 9357-CNETL3 | RSNetWorx for ControlNet software |
| 9357-DNETL3 | RSNetWorx for DeviceNet software |
| 9357-ENETL3 | RSNetWorx for Ethernet/IP software |
| 9357-ANETL3 | RSNetWorx for ControlNet, Ethernet/IP and DeviceNet software |
| 9357-CNETMD3E |
RSNetWorx for ControlNet software with MD, includes DriveExecutive Lite software |
| 9357-DNETMD3E |
RSNetWorx for DeviceNet software with MD |
| 9357-ENETMD3E |
RSNetWorx for EtherNet/IP software with MD |
| 9357-ANETMD3E | RSNetWorx for ControlNet, DeviceNet, and Ethernet/IP software with MD |