Catalogs > Automation Systems Catalog > Programmable Controllers > SoftLogix5800 Controller > SoftLogix5800 Integrated Motion
SoftLogix5800 Integrated Motion
SoftLogix5800 Motion Modules
SERCOS Interface PCI Card
The 16-axis (1784-PM16SE) SERCOS interface card serves as a link between the SoftLogix platform and intelligent, servo drives. SERCOS is the IEC 61491 SErial Real-time COmmunication System protocol over a fiber optic medium. The SERCOS interface is an open, controller-to-digital drive interface designed for high-speed, real time, serial communications using noise-immune, fiber-optic cables.
The SERCOS interface module uses a single, digital fiber optic link, which eliminates up to 18 discrete wires per axis. Detailed drive status information can be sent from drive to controller and from controller to drive.
| Cat. No. | Maximum Number of Axes per Module | Maximum Number of Axes per SoftLogix Controller | Power Dissipation | Current Capacity (Amps) at 3.3V | Backplane Current at 5.1V | SERCOS Data Rate |
| 1784-PM16SE | 16 | 16 | 7.5 W | 0.050 A | 1.065 A | 4 Mbits or 8 Mbits per second |
| Certifications: UL, CSA (Class I, Division 2, Group A, B, C, D), CE | ||||||
Analog Servo PCI Card
The 1784-PM02AE analog motion card is a 2-axis, closed-loop servo module that you use with a SoftLogix controller. The motion card installs in a 32-bit, local PCI bus slot. You can install as many as four analog motion cards in the same computer, for a total of 8 axes of servo or position-only support.
| Cat. No. | Maximum Number of Axes per Controller |
| 1784-PM02AE | 32 |
| Certifications: UL, CSA (Class I, Division 2, Group A, B, C, D), CE | |