Software

Software for a ControlLogix System

Your selection of modules and network configuration determines what software packages you need to configure and program your system.

1756 System Software

If you have	You need	Order
1756 ControlLogix controller	RSLogix 5000 Enterprise Series software	9324 series
1756 SERCOS or analog motion module	RSLogix 5000 Enterprise Series software	9324 series
1756-CN2, -CN2R 1756-CNB, -CNBR ControlNet communication module	RSNetWorx for ControlNet software (comes with the Standard/NetWorx and Professional Editions of RSLogix 5000 Enterprise Series software)	9324-RLD300NXENE (RSNetWorx option) or 9324-RLD700NXENE (RSLogix 5000 Professional software) or 9357-CNETL3 (RSNetWorx for ControlNet)
1756-DNB DeviceNet communication module	RSNetWorx for DeviceNet software (comes with the Standard/NetWorx and Professional Editions of RSLogix 5000 Enterprise Series software)	9324-RLD300NXENE (RSNetWorx option) or 9324-RLD700NXENE (RSLogix 5000 Professional software) or 9357-DNETL3 (RSNetWorx for DeviceNet)
1756-EN2F, 1756-EN2T 1756-ENBT, 1756-EWEB EtherNet/IP communication module (set the IP address)	RSLinx software or BOOTP/DHCP server utility to set IP addresses (RSLinx Lite and BOOTP server come with RSLogix 5000 Enterprise Series software) Optional RSNetWorx for EtherNet/IP software (comes with the Standard/RSNetWorx and Professional Editions of RSLogix 5000 Enterprise Series software)	9324 series Optional 9357-ENETL3 (RSNetWorx for EtherNet/IP)
1756-DHRIO communication module 1756-DH485 communication module	RSLinx software	9324 series
1757-FFLD FOUNDATION Fieldbus linking device	RSFieldbus Configuration Software	9308 series
1788-CN2FF FOUNDATION Fieldbus linking device	NI-FBUS Configurator Software and one of the following: RSLinx Gateway, OEM, or Professional software (RSLinx Lite software is not sufficient)	1788-FFCT and 9355 series
Communication card in a workstation	RSLinx software (RSLinx Lite comes with RSLogix 5000 Enterprise Series software)	9324 series

Product Overview

Click to enlarge - RSLogix500SoftwareIcon_BW

RSLogix 5000 Software

RSLogix 5000 Enterprise Series software is designed to work with Logix5000 controller platforms. RSLogix 5000 Enterprise Series software is an IEC 61131-3 compliant software package that offers relay ladder, structured text, function block diagram, and sequential function chart editors for you to develop application programs. Create your own instructions by encapsulating a section of logic in any programming language into an add-on instruction.

RSLogix 5000 Enterprise Series software also includes axis configuration and programming support for motion control. With RSLogix 5000 Enterprise Series software, you need only one software package for discrete, process, batch, motion, safety, and drive-based applications.

Click to enlarge - RSLogixProgLanguages_GS

Click to enlarge - RSLogixDataMonitor_GS

RSLogix 5000 Enterprise Series Software Requirements

Description	Value
Personal computer	Pentium II 450 MHz min Pentium III 733 MHz (or better) recommended
Software requirements	Supported operating systems: RSLogix 5000 v.17 has been tested on the following operating systems: • Microsoft Windows XP Professional with Service Pack 2 • Microsoft Windows Server 2003 R2 Standard Edition with Service Pack 1 and User Account Control (UAC) turned off • Microsoft Windows 2000 Professional with Service Pack 4 • Microsoft Windows Vista Home Basic with SPI • Microsoft Windows Vista Business with SPI RSLogix 5000 is expected to operate correctly on the following operating systems, but has not been tested: • Microsoft • Microsoft Windows XP Home • Microsoft Windows Server 2003 Standard Edition with Service Pack 1 • Microsoft Windows 2000 Professional with Service Pack 1, 2, or 3 • Microsoft Windows Vista Ultimate • Microsoft Windows Vista Home Premium The Chinese, Japanese, and Korean editions of RSLogix 5000 are supported only on Microsoft Windows XP, Microsoft Windows Vista and Microsoft Windows Server 2003. RSLogix 5000 software is supported for 32-bit architectures (x86) and has not been tested with 64-bit architectures (x64).
RAM	128 MB of RAM min 256 MB of RAM recommended
Hard disk space	3 GB of free hard disk space (or more based on application requirements)
Optical drives	DVD
Video requirements	256-color VGA graphics adapter 800 x 600 min resolution (True Color 1024 x 768 recommended)

Select the RSLogix 5000 Enterprise Series Software Package

Available Features	Service Edition 9324-RLD000xxE¬	Mini Edition 9324-RLD200xxE¬	Lite Edition 9324-RLD250xxE¬	Standard Edition: Node Locked 9324-RLD300xxE Concurrent License¹¹ 9324-RLD300xxF¬	Standard/ NetWorx Edition 9324-RLD300NXxxE¬	Full Edition: Node Locked 9324-RLD600xxE Concurrent License¹¹ 9324-RLD600xxF¬	Professional Edition: Node Locked: 9324-RLD700NXxxE Concurrent License¹¹ 9324-RLD700NXxxF¬
Logix5000 controllers supported	Allª	CompactLogix FlexLogix	CompactLogix FlexLogix	All	All	All‡	All
Relay ladder diagram§	Upload/download and view	Full support	Full support	Full support	Full support	Full support	Full support
Function block diagram 9324-RLDFBDENE§	Upload/download and view	Upload/download Available separately	Full support	Upload/download Available separately	Upload/download Available separately	Full support	Full support
Sequential function chart editor 9324-RLDSFCE§ Ø	Upload/download and view	Upload/download Available separately	Full support	Upload/download Available separately	Upload/download Available separately	Full support	Full support
Structured text 9324-RLDSTXE§	Upload/download and view	Upload/download Available separately	Full support	Upload/download Available separately	Upload/download Available separately	Full support	Full support
PhaseManager 9324-RLDPME	Upload/download	Upload/download Available separately	Upload/download Available separately	Upload/download Available separately	Upload/download Available separately	Full support	Full support
GuardLogix Safety 9324-RLDGLXEª	Upload/download and view	NA	NA	Upload/download Available separately	Upload/download Available separately	Full support	Full support
Highly integrated motion	Upload/download and view	Upload/download	Full support	Full support	Full support	Full support	Full support
Graphical trending	Full support	Full supportv	Full supportv	Full support	Full support	Full support	Full support
DriveExecutive Lite 9303-4DTE01ENE	Available separately	Available separately	Available separately	Included	Included	Included	Included
PIDE autotune 9323-ATUNEENE‡	Available separately	Available separately	Available separately	Available separately	Available separately	Included	Included
Advanced Process Control instructions 9324-RLDAPCENE¹²	Upload/download and view	Available separately	Available separately	Available separately	Available separately	Available separately	Available separately
FactoryTalk AssetCentre audit support	Included	Included	Included	Included	Included	Included	Included
FuzzyDesigner 9324-RLDFZYENEª	NA	Available separately	Available separately	Available separately	Available separately	Available separately	Available separately
RSLogix Emulate 5000 9310-WED200ENE¹³	Available separately	NA	NA	Available separately	Available separately	Available separately	Included
Logix CPU security	Included	Included	Included	Included	Included	Included	Included
Routine source protection	Included	Included	Included	Included	Included	Included	Included
FactoryTalk security server¹⁴	Included	Included	Included	Included	Included	Included	Included
Security server emulator¹⁴	Included	Included	Included	Included	Included	Included	Included
RSLinx Classic software	Lite included	Lite included	Lite included	Lite included	Lite included	Lite included	Lite includedª
RSNetWorx ControlNet, RSNetWorx DeviceNet, RSNetWorx EtherNet/IP softwareT	Available separately	Available separately	Available separately	Available separately	Included	Available separately	Included
RSLogix Architect 9326-LGXARCHENEv	Available separately	Available separately	Available separately	Available separately	Available separately	Available separately	Included
RSLogix 5000 project compare	Included	Included	Included	Included	Included	Included	Included
FactoryTalk View SE demo (50 tags/2 hours)	Available separately	Available separately	Available separately	Available separately	Available separately	Available separately	Included
Upgrades	Refer to the StepForward Program

¬ Replace xx in the catalog number with the appropriate language designation: ZH=Chinese, EN=English, FR=French, DE=German, IT=Italian, JP=Japanese, KO=Korean, PT=Portuguese, and ES=Spanish. ¹¹The software is designed to grab highest functionality license first I.e.; if Standard, Full and Professional Concurrent licenses are available on the FT Activation server, RSLogix 5000 will grab highest functionality license first. ª Service Edition supports controllers with firmware revision 12 and later. ‡ Full Edition supports controllers with firmware revision 10 and later. § A multiple language editor package is available as 9324-RLDMLPE. It contains the function block, sequential function chart, and structured text editors. ‡ PIDE Autotune is not supported on 1769-L23x controllers. T RSNetWorx for ControlNet software is 9357-CNETL3. RSNetWorx for DeviceNet software is 9357-DNETL3. RSNetWorx for EtherNet/IP software is 9357-ENETL3. They are available together as 9357-ANETL3. v As of RSLogix 5000 programming software, version 15. ª As of RSLogix 5000 programming software, version 16. Ø The Structured Text editor option (9324-RLDSTXE) is required to program SFC actions in structured text. ¹²Select either a combination of design license for software and runtime license for one controller or only runtime license for one controller (pay to deploy). ¹³RSLogix Emulate 5000 does not support Microsoft Windows Vista at this time. ¹⁴FactoryTalk AP install required - included on disk.

Product Overview

RSLinx Software

RSLinx software is a complete communication server providing plant-floor device connectivity for a wide variety of software applications. In addition, several open interfaces are provided for third-party HMI, data collection and analysis packages, and custom client-application software.

RSLinx software, version 2.x, is joined by RSLinx Enterprise software, another product within the RSLinx family that provides unparalleled connectivity to Logix processors. RSLinx Enterprise software works as a data server.

RSLinx Software Requirements

Description	Value
Personal computer	Pentium100 MHz processor (faster processors will improve performance)
Operating system	Supported operating systems: • Microsoft Windows XP • Microsoft Windows 2000 • Microsoft Windows NT version 4.0 with Service Pack 3 or greater • Microsoft Windows ME • Microsoft Windows 98
RAM	32 MB of RAM min 64 MB or more of RAM recommended
Hard disk space	35 MB of free hard disk space (or more based on application requirements)
Video requirements	16-color VGA graphics display 800 x 600 or greater resolution

In most cases, RSLinx Lite software comes bundled with controller programming software packages.

You can also download RSLinx Lite for free from the Software Updates link on the Get Support Now website at http://support.rockwellautomation.com

Select the RSLinx Software Package

Cat. No.	RSLinx Products
Available only bundled with other products such as RSLogix software products.	RSLinx Lite
9355-WABSNENE	RSLinx Single Node
9355-WABOEMENE	RSLinx OEM
9355-WABENE	RSLinx Professional
9355-WABGWENE	RSLinx Gateway
9355-WABCENE	RSLinx SDK
9355-RSLETENE	RSLinx Enterprise

Product Overview

Click to enlarge - RSNetWorxSoftwareIcon_BW

RSNetWorx Software

RSNetWorx software is the configuration tool for your control network. With RSNetWorx software you can create a graphical representation of your network configuration and configure the parameters that define your network.

Use RSNetWorx software for:

ControlNet software to schedule network components. The software automatically calculates network bandwidth for the entire network, as well as the bandwidth used by each network component. You must have RSNetWorx software to configure and schedule ControlNet networks.
DeviceNet software to configure DeviceNet I/O devices and create a scan list. The DeviceNet scanner stores the configuration information and scan list.
EtherNet/IP software to configure EtherNet/IP devices using IP addresses or host names.

Click to enlarge - RSNetWorxCNetScreen_GS

Click to enlarge - RSNetWorxDNIScreen_GS

RSNetWorx Software Requirements

Description	EtherNet/IP Value	ControlNet Value	DeviceNet Value
Personal computer	Intel Pentium or Pentium-compatible computer
Operating system	Supported operating systems: • Microsoft Windows XP • Microsoft Windows 2000 • Microsoft Windows 2000 Terminal Server • Microsoft Windows NT version 4.0 with Service Pack 6 or later • Microsoft Windows ME • Microsoft Windows 98
RAM	32 MB of RAM min More memory is required for large networks
Hard disk space	Minimum: 108 MB (includes program and hardware files) Full support: 115...125 MB (includes program, online help, tutorial, and hardware files)	Minimum: 115 MB (includes program and hardware files) Full support: 168...193 MB (includes program, online help, tutorial, and hardware files)	Minimum: 190 MB (includes program and hardware files) Full support: 230...565 MB (includes program, online help, tutorial, and hardware files)
Video requirements	16-color VGA graphics adapter 640 x 480 resolution minimum 800 x 600 resolution recommended
Other	RSLinx Lite software, version 2.41 or later, to use RSNetWorx software online	RSLinx Lite software, version 2.4 or later, to use RSNetWorx software online	RSLinx Lite software, version 2.4 or later, to use RSNetWorx software online

In some cases, RSNetWorx software comes bundled with controller programming software packages.

Select the RSNetWorx Software Package

Cat. No.	Description
9357-CNETL3	RSNetWorx for ControlNet software
9357-DNETL3	RSNetWorx for DeviceNet software
9357-ENETL3	RSNetWorx for Ethernet/IP software
9357-ANETL3	RSNetWorx for ControlNet, Ethernet/IP and DeviceNet software
9357-CNETMD3E	RSNetWorx for ControlNet software with MD, includes DriveExecutive Lite software
9357-DNETMD3E	RSNetWorx for DeviceNet software with MD
9357-ENETMD3E	RSNetWorx for EtherNet/IP software with MD
9357-ANETMD3E	RSNetWorx for ControlNet, DeviceNet, and Ethernet/IP software with MD

Product Overview

RSLogix Emulate 5000 Software

RSLogix Emulate 5000 software (9310-WED200ENE) is the emulation package for the Logix5000 controllers. RSLogix Emulate 5000 software, used in conjunction with RSLogix 5000 software, lets you run and debug your application code while at your computer. In addition, RSLogix Emulate 5000 software lets you test HMI screens, developed in FactoryTalk View SE software for example, without the need to connect to a real controller.

You can set tracepoint and breakpoint instructions (ladder diagram only) in your application code, use traces, and also vary the execution speed of the emulator. RSLogix Emulate 5000 software supports all the programming languages (ladder diagram, function block diagram, structured text, and sequential function chart). RSLogix Emulate 5000 software does not allow for control of real I/O.

Use RSLogix Emulate software for:

troubleshooting.
Stop the process whenever a selected rung goes true, effectively freezing the process at the instant that any error occurs.
ladder logic scanning options.
Scan your ladder logic continuously, one program scan at a time, rung-by-rung, or select a specific block of rungs to emulate. Selecting a block of rungs lets you isolate a particular section of the program for testing purposes. You can also set trace points to trace application program tags and set break points to halt program execution at predetermined locations.

Click to enlarge - RSEmulateChassisScreen_GS

RSLogix Emulate 5000 Requirements

Description	Value
Personal computer	IBM-compatible Intel Pentium II 300 MHz or Celeron 300A (Pentium III 600 MHz recommended)
Operating system	Supported operating systems: • Microsoft Windows XP with Service Pack 1or later • Microsoft Windows 2000 with Service Pack 2 or later • Microsoft Windows NT version 4.0 with Service Pack 6A or later
RAM	128 MB of RAM min
Hard disk space	50 MB of free hard disk space
Video requirements	16-color VGA graphics display 800 x 600 or greater resolution

RSLogix Emulate 5000 software is included with RSLogix 5000 Professional software.

Logix-based Training

Rockwell Automation offers several different levels of training for your Logix system. While most of these training aids are ControlLogix specific, the lessons and tools also apply to the other Logix platforms.

Option	Description
Instructor-led courses	Courses are best suited for people new to the Logix architecture and for those new to programmable controllers. For available ControlLogix courses and descriptions, see http://www.rockwellautomation.com/services/training/clgxrslgx5000.html
Computer-based and web-based training programs	Programs that are designed to provide essential information to perform ControlLogix job-related tasks. Students learn through realistic simulations, detailed graphics and animations, hands-on interactive exercises, and review questions. Computer-based and web-based training can be used as a pre-requisite for more advanced training, or it is best used as a resource following an instructor-led course. Course content can be repeated to continuously refresh knowledge and review important information. See http://www.rockwellautomation.com/services/training/cbt.html
Training workstations	Workstations can be used to reinforce and practice skills, train new employees, and ease the transition from one technology to another in a plant. Workstations also provide users with hands-on maintenance, troubleshooting, and programming experience using actual equipment. Workstations are used with most of the available instructor-led courses. A variety of standard ControlLogix workstations are available and they include combinations of network hardware (ControlNet, DH+), control hardware (controller, programming cable, power supply, I/O modules), motion control hardware (motion module, servo drive, motor), and operator interface hardware (pushbutton potentiometer, voltmeter). See http://www.rockwellautomation.com/services/training/workstations.html
Job aids	Useful resources to take back to your facility after completing instructor-led and computer-based training. Job aids ensure that you are consistently using best practices, and they provide immediate hardware and software information when it is needed so production does not slow. See http://www.rockwellautomation.com/services/training/jobaids.html

Instructor-led Courses

The instructor-led courses are best suited for people new to the Logix architecture and for those new to programmable controllers.

Course	Description
CIA101	Introduction to Automation and Integrated Architecture
CCP146	RSLogix 5000 Level 1: ControlLogix System Fundamentals
CCP299	RSLogix 5000 Level 1: ControlLogix Fundamentals and Troubleshooting
CCCL21	RSLogix 5000 Level 2: Basic Ladder Logic Interpretation
CCP151	RSLogix 5000 Level 2: Basic Ladder Logic Programming
CCP153	RSLogix 5000 Level 3: ControlLogix Maintenance and Troubleshooting
CCP143	RSLogix 5000 Level 3: Project Development
CCN142	RSLogix 5000 Level 4: Motion Programming Using Ladder Logic
CCP152	RSLogix 5000 Level 4: Function Block Programming
SAF-LOG101	GuardLogix Application and Development
SAF-LOG102	GuardLogix Maintenance and Troubleshooting

Computer-based Training

Computer-based training programs for ControlLogix (9393-RST catalog numbers) are designed to provide essential information to perform ControlLogix job-related tasks. Students learn through realistic simulations, detailed graphics and animations, hands-on interactive exercises, and review questions. Computer-based training can be used a pre-requisite for more advanced training, or it is best used as a resource following an instructor-led course. Course content can be repeated to continuously refresh knowledge and review important information.

Click to enlarge - RSTrainerStartScreen_GS

Click to enlarge - RSTrainerTaskScreen_GS

ControlLogix Workstation Simulator

Training workstations (ABT-TD catalog numbers) are the ideal support tool that you can integrate into your training and development programs. Workstations can be used to reinforce and practice skills, train new employees, and ease the transition from one technology to another in a plant. Workstations also provide users with hands-on maintenance, troubleshooting, and programming experience using actual equipment. Workstations are used with most of the available instructor-led courses. A variety of standard ControlLogix workstations are available and they include different combinations of the following equipment:

Network hardware (ControlNet, DH+)
Control hardware (controller, power supply, digital I/O modules, analog I/O modules)
Programming cable (to connect to your computer)
Motion control hardware (motion modules, servo drives, motors)
Operator interface panel (pushbuttons, potentiometers, voltmeters)

Job Aids

Job aids (ABT-1756 and ABT-GRDLX catalog numbers) are useful resources to take back to your facility after completing instructor-led and computer-based training. Job aids ensure that you are consistently using best practices, and they provide immediate hardware and software information when it is needed so production does not slow.