|Introduction||ControlLogix System||XT Extreme Environment System||ControlLogix Enhanced Redundancy System||GuardLogix Safety System|
ControlLogix Systems Overview
ControlLogix systems provide discrete, drives, motion, process, and safety control together with communication and state-of-the-art I/O in a small, cost-competitive package. The systems are modular, so you can design, build, and modify them efficiently - with significant savings in training and engineering.
ControlLogix system components include:
|ControlLogix Controllers|| Options include: ControlLogix standard controllers, GuardLogix safety controllers, and ControlLogix-XT extended temperature controllers.
User memory ranges from 2 to 32 MB, depending on controller type.
|ControlLogix Communication Modules|| Options include: EtherNet/IP, ControlNet, DeviceNet, Data Highway Plus, Remote I/O, Foundation Fieldbus, Serial, DH-485, and SynchLink.
Install multiple communication-interface modules into the ControlLogix backplane to configure a gateway to bridge or route control and information data between different networks.
|ControlLogix Integrated Motion Modules|| Choose from SERCOS or analog interface modules.
A removable terminal block (RTB) is required for analog interface modules only.
|ControlLogix I/O Modules|| Options include: digital, analog, thermocouple, RTD, motion, and specialty modules.
Densities range from 4 to 32 points per module.
Modules are rate IP20, Class I, Division 2/Zone 2.
Some modules have field-side diagnostics, electronic fusing, or individually isolated inputs/outputs.
A remote terminal block (RTB) or wiring system is required for each I/O module.
|ControlLogix Power Supplies|| ControlLogix power supplies are used with the 1756 chassis to provide 1.2V, 3.3V, 5V, and 24V DC power directly to the chassis backplane.
Select one power supply for each chassis, if you are using standard power supplies.
Select a power supply bundle if you are planning a redundant power supply system.
|ControlLogix Chassis|| Choose from ControlLogix standard or ControlLogix-XT chassis.
Standard chassis are available with 4, 7, 10, 13, or 17 slots.
ControlLogix-XT chassis are available with 5 or 7 slots.
Slot fillers are required for empty slots.
Optional system components include:
|Operator Interface and Computers|| Our HMI and computer products, together with Logix for control and NetLinx architecture for communication, make up the Rockwell Automation Integrated Architecture strategy.
Choose from PanelView Plus and PanelView Plus CE electronic operator interface and Rockwell Automation industrialized personal computer hardware.
Available Rockwell Software supervisory control software includes FactoryTalk View software.
|Software|| Your selection of modules and network configuration determines what software packages you need to configure and program your system.
Program your ControlLogix system with RSLogix 5000 Enterprise Series software.
Additional design and configuration products include RSNetworx and RSLinx software.