Catalogs > Automation Systems Catalog > Programmable Controllers > MicroLogix 1400 System > 1762 MicroLogix Expansion I/O
1762 MicroLogix Expansion I/O
| Introduction |  |
Environmentals and Certifications | |
Digital I/O Modules | |
Analog I/O Modules | |
Specialty I/O Modules | |
|
Expansion I/O Modules
The 1762 MicroLogix expansion I/O modules are compatible with MicroLogix 1100, MicroLogix 1200, and MicroLogix 1400 controllers. If your application requires more I/O than the built-in I/O provided by the controller, add expansion I/O modules.
Install the expansion I/O modules to the right of the controller, either on a panel with two mounting screws or on a DIN rail. You can use digital and analog I/O modules in many combinations, up to the maximum supported by the controller. The current loading capacity of the controller’s built-in power supply may limit the actual number of I/O modules that can be connected to the controller.
Features
- Integrated high-performance I/O bus
- Software keying to prevent incorrect positioning within the system
- Finger-safe terminal blocks for I/O wiring
- Label to record I/O terminal designations
- Network support includes EtherNet/IP, DeviceNet, and DH-485 (local only)
- Digital, analog, and specialty I/O modules available
Maximum 1762 Expansion I/O Modules per Controller
| Controller | Number I/O Modules, Max. |
| MicroLogix 1100 | 4 |
| MicroLogix 1200 | 6 |
| MicroLogix 1400 | 7 |