1762 MicroLogix Expansion I/O
|
Expansion I/O Modules
The 1762 MicroLogix expansion I/O modules are compatible with MicroLogix 1100, MicroLogix 1200, and MicroLogix 1400 controllers. If your application requires more I/O than the built-in I/O provided by the controller, add expansion I/O modules.
Install the expansion I/O modules to the right of the controller, either on a panel with two mounting screws or on a DIN rail. You can use digital and analog I/O modules in many combinations, up to the maximum supported by the controller. The current loading capacity of the controller’s built-in power supply may limit the actual number of I/O modules that can be connected to the controller.
Features
- Integrated high-performance I/O bus
- Software keying to prevent incorrect positioning within the system
- Finger-safe terminal blocks for I/O wiring
- Label to record I/O terminal designations
- Network support includes EtherNet/IP, DeviceNet, and DH-485 (local only)
- Digital, analog, and specialty I/O modules available
Maximum 1762 Expansion I/O Modules per Controller
| Controller | Number I/O Modules, Max. |
| MicroLogix 1100 | 4 |
| MicroLogix 1200 | 6 |
| MicroLogix 1400 | 7 |
Environmentals and Certifications
Environmental Specifications
| 1762 MicroLogix Expansion I/O Modules | |
| Operating Temperature | -20…65 °C (-4…149 °F) (on selected modules) |
| Operating Humidity | 5…95% (without condensation) |
| Operating Altitude, Max. | 2,000 m (6,561 ft) |
| Vibration, Operating | 10…500 Hz, 5 g, 0.015 in peak-to-peak |
| Vibration, Relay Operation | 2 g |
| Shock, Operating | 30 g panel mounted, 20 g DIN-rail mounted |
| Shock, Relay Operation | 7.5 g panel mounted, 5 g DIN rail mounted |
| Shock, Nonoperating | 40 g panel mounted, 30 g DIN rail mounted |
| Dimensions (HxWxD), Approx. | 90 x 40 x 87mm (3.543 x 1.575 x 3.425 in.)¬ |
| Radiated and Conducted Emissions | EN50081-2 Class A |
| ESD Immunity (IEC 1000-4-2) | 4 kV contact, 8 kV air, 4 kV indirect |
| Radiated Immunity (IEC 1000-4-3) | 10V/m, 80-1000 MHz, 80% amplitude modulation, +900 MHz keyed carrier |
| Fast Transient Burst (IEC 1000-4-4) | 2 kV, 5 kHz |
| Surge Immunity (IEC 1000-4-5) | 2 kV common mode, 1 kV differential mode |
| Conducted Immunity (IEC 1000-4-6) | 10V, 0.15…80 MHzT |
| ¬ Height including mounting tabs is 110 mm (4.33 in.). T Conducted immunity frequency range may be 150 kHz…30 MHz if the radiated immunity frequency range is 30 MHz…1000 MHz. |
|
Certifications
Certifications: C-UL certified (under CSA C22.2 No. 142), UL 508 Listed, CE compliant for all applicable directives.
Hazardous Environment Class: Class I, Division 2, Hazardous Location, Groups A, B, C, D (UL1604, C-UL under CSA C22.2 No. 213).
When product is marked. See the Product Certification link at www.ab.com for Declarations of Conformity, Certificates, and other certification details.
Digital I/O Modules
Digital Output Modules
| Cat. No. | Outputs | Voltage Category | Operating Voltage Range | Continuous Current per Output, Max. | Continuous Current per Module, Max. | Off-State Leakage Current, Max. | Bus Current Load, Max. |
| 1762-OA8 | 8 (4 points/group) | 100…240V AC | 85…265V AC @ 47…63 Hz) | 0.25 A @ 55 °C (131 °F) 0.5 A @ 30 °C (86 °F) |
2.0 A (1.0 A per common) @ 55 °C (131 °F) 4.0 A (2.0 A per common) @ 30 °C (86 °F) |
2 mA @ 132V 2.5 mA @ 265V |
115 mA @ 5V DC (0.575 W) |
| 1762-OB8 | 8 | 24V DC source | 20…26.4V DC | 0.5 A @ 55 °C (131 °F) 1.0 A @ 30 °C (86 °F) |
4.0 A @ 55 °C (131 °F) 8.0 A @ 30 °C (86 °F) |
1.0 mA | 115 mA @ 5V DC (0.575 W) |
| 1762-OB16 | 16 (8 points/group) | 24V DC source | 20…26.4V DC | 0.5 A @ 55 °C (131 °F) 1.0 A @ 30 °C (86 °F) |
4.0 A @ 55 °C (131 °F) 8.0 A @ 30 °C (86 °F) |
1.0 mA | 175 mA @ 5V DC (0.88 W) |
| 1762-OW8 | 8 (4 points/group) | AC/DC N.O. contact | 5…265V AC 5…125V DC |
2.5 AT | 16.0 A (8.0 A per common) | 0 mA | 80 mA @ 5V DC (0.40 W) 90 mA @ 24V DC (2.16 W) |
| 1762-OW16 | 16 (4 points/group) | AC/DC N.O. contact | 5…265V AC 5…125V DC |
2.5 AT | 16.0 A (8.0 A per common) | 0 mA | 120 mA @ 5V DC (0.60 W) 140 mA @ 24V DC (3.36 W) |
| 1762-OX6I | 6 N.C., N.O. | AC/DC Type C Relay | 5…265V AC 5…125V DC |
7.0 AT | 30.0 A (7.0 A per commonT ) | 0 mA | 110 mA @ 5V DC (0.55 W) 110 mA @ 24V DC (2.64 W) |
| 1762-OV32T | 32 (16 points/group) | 24V DC sink | 10.2...26.4V DC | 0.5 A @ 60 °C (140 °F) | 4.0 A (2.0 A per common) @ 60 °C (140 °F) | 0.1mA @ 26.4V DC | 175 mA @ 5V DC |
| 1762-OB32T | 32 (16 points/group) | 24V DC source | 10.2...26.4V DC | 0.5 A @ 60 °C (140 °F) | 4.0 A (2.0 A per common) @ 60 °C (140 °F) | 0.1mA @ 26.4V DC | 175 mA @ 5V DC |
| T See MicroLogix Programmable Controllers Family Selection Guide, publication 1761-SG001, for complete information on relay contact ratings. | |||||||
Digital Input Modules
| Cat. No. | Inputs | Voltage Category | Operating Voltage Range | On-State Current, Max. | Impedance, Nom. | Signal Delay, Max. | Off-State Voltage and Current, Max. | Bus Current Draw, Max. |
| 1762-IA8 | 8 | 100/120V AC | 79…132V AC @ 47…63 Hz | 16 mA @ 132V AC, 63 Hz | 12 kW @ 50 Hz 10 kW @ 60 Hz |
On/Off: 20 ms | 20V AC 2.5 mA |
50 mA @ 5V DC (0.25 W) |
| 1762-IQ8 | 8 | 24V DC sink/source | 10…26.4V DC @ 55 °C (131 °F) 10…30V DC @ 30 °C (86 °F) |
12 mA @ 30V DC | 3 kW | On/Off: 8 ms | 5V DC 1.5 mA |
50 mA @ 5V DC (0.25 W) |
| 1762-IQ16 | 16 (8 points/group) | 24V DC sink/source | 12 mA @ 30V DC | 3 kW | On/Off: 8 ms | 5V DC 1.5 mA |
60 mA @ 5V DC (0.25W) | |
| 1762-IQ32T | 32 (8 points/group) | 24V DC sink/source | 10...26.4V DC 10...30V DCT |
6.5 mA @ 30.0V DC | 4.7 kW | On/Off: 8 ms | 5V DC 1.0 mA |
170 mA @ 5V DC |
| T See MicroLogix 1762-IQ32T DC Input Module Installation Instructions, publication 1762-IN019, for derating chart. | ||||||||
Digital Combination Modules
| Cat. No. | Inputs/Outputs | Voltage Category | Operating Voltage Range | On-State Current, Max. | Continuous Current per Output, Max. | Off-State Voltage and Current, Max. | Off-State Leakage Current, Max. | Impedance, Nom. | Signal Delay, Max. | Bus Current, Max. |
| 1762-IQ8OW6 | 8 inputs | 24V DC sink/source | 10…26.4V DC @ 65 °C 10…30V DC @ 30 °C |
10 mA @ 5V DC | — | 5V DC 1.5 mA |
— | 3 kW | On/Off: 8 ms | 110 mA @ 5V DC (0.25 W) 80 mA @ 24 Vdc |
| 6 outputs | AC/DC N.O. contact | 5…265V AC 5…125V DC |
— | 2.5 A (8.0 A per module, max.) | — | 0 mA | — | — | 110 mA @ 5V DC (0.40 W) 80 mA @ 24 VDC (2.16 W) |
Analog I/O Modules
| Cat. No. | Inputs/Outputs | Analog Ranges | Bus Current Draw, Max. | Overall Accuracy¬ | Resolution Across Full Range | Typical Update Period |
| 1762-IF4 | 4 differential inputs (bipolar) | Voltage: ±10V Current: 4…20 mA |
40 mA @ 5V DC 50 mA @ 24V DC |
±0.3% full scale @ 0…55 °C (32…131 °F) ±0.24% full scale @ 25 °C (77 °F) |
15 bits | 130, 250, 290, 450, 530 ms (selectable) |
| 1762-OF4 | 4 single-ended outputs (unipolar) | Voltage: 0…10V Current: 4…20 mA |
40 mA @ 5V DC 165 mA @ 24V DC |
±1.0% full scale @ 0…55 °C (32…131 °F) ±0.5% full scale @ 25 °C (77 °F) |
12 bits (unipolar) | 2.5 ms |
| 1762-IF2OF2 | 2 differential inputs (unipolar) 2 single-ended outputs (unipolar) |
Voltage: 0…10V Current: 4…20 mA |
40 mA @ 5V DC 105 mA @ 24V DC |
±0.5% full scale @ 0…55 °C (32…131 °F) ±0.3% full scale @ 25 °C (77 °F) |
12 bits (unipolar) | 2.5 ms (inputs) 4.5 ms (outputs) |
| ¬ Includes offset, gain, non-linearity, and repeatability error terms. ‡ Accuracy is dependent upon the Analog/Digital converter filter rate selection, excitation current selection, data format, and input noise. |
||||||
Specialty I/O Modules
| Cat. No. | Inputs/Outputs | Accepted Inputs | Bus Current Load, Max. | Accuracy @ 25 °C (77 °F)¬ | Resolution Across Full Range | Channel Update Time (Typical) |
| 1762-IR4 | 4 input channels | • RTDs: Platinum (385 and 3916), Copper (426), Nickel (672 and 618), Nickel-Iron (518) • Resistance Ranges: 0…3000 W |
40 mA @ 5V DC 50 mA @ 24V DC |
With autocalibration enabled • RTD Inputs: ±0.2…±0.6 °C (±0.36…±1.08 °F), depending on RTD type • Resistance Inputs: ±0.5…±1.5W, depending on resistance value |
Input filter and configuration dependent§ | 6…303 ms per enabled channel, depending on filter selection |
| 1762-IT4 | 4 input channels plus a CJC sensor | • Thermocouple Types: J, K, T, E, R, S, B, N, C • Millivolt Input Ranges: ±50 mV and ±100 mV |
40 mA @ 5V DC 50 mA @ 24V DC |
±1.3 °C (±2.34 °F) | 15 bits plus sign | 7…303 ms per enabled channel +CJC update time§ |
| ¬ Includes offset, gain, non-linearity, and repeatability error terms. § Refer to the MicroLogix 1200 RTD/Resistance Input Module User Manual, publication 1762-UM003, for more information. § CJC update time is equal to the largest enabled channel's update time. |
||||||