Catalogs > Industrial Controls Catalog > Condition Sensing Switches and Controls > Speed Sensing
Speed Sensing
| Introduction |  |
Standards Compliance and Certifications | |
Introduction | |
Technical Data | |
| Ordering Information | |
Product Selection | |
Modifications and Accessories | |
Approximate Dimensions | |
Dimensions in inches (millimeters). Dimensions are not intended to be used for manufacturing purposes.
Type 1, 4, & 13
Figure 1 — Less Mounting Bracket
|
| Less Mounting Bracket | |
| Cat. No. | |
| Without Lockout Solenoid | With Lockout Solenoid¬ |
| 808-J4 | 808-J4L |
| 808-K4 | 808-K4L |
| 808-M4 | 808-M4L |
| 808-R4 | 808-R4L |
Figure 2 — Base Mounting
|
| Base Mounting | |
| Cat. No. | |
| Without Lockout Solenoid | With Lockout Solenoid¬ |
| 808-J1 | 808-J1L |
| 808-K1 | 808-K1L |
| 808-M1 | 808-M1L |
| 808-R1 | 808-R1L |
¬ If lockout solenoid is used, see dotted portion of Figure 1 for dimensions.
T If speed switch is without the external shaft bearing seal (suffix W5), this dimension would be 1-3/8 (34.9).
‡ Bulletin 808 Speed Switches with a suffix X1 added to the catalog number are equipped with a 1/2 (12.7) pipe tap in the center of the enclosure bottom on the same center line as the pipe tap at the side.
Approximate Shipping Weights
- Without lockout solenoid: Type 1, 4 & 13: 6 lbs (2.7 kg); Type 7 & 9: 10 lbs (4.5 kg)
- With lockout solenoid: Type 1, 4 & 13: 7-1/2 lbs (3.4 kg); Type 7 & 9: 11-1/2 lbs (5.2 kg)
Dimensions in inches (millimeters). Dimensions are not intended to be used for manufacturing purposes.
Type 1, 4, & 13 (continued)
Figure 3 — Flange Mounting (Three-Point)
|
| Flange Mounting (Three Point) | |
| Cat. No. | |
| Without Lockout Solenoid | With Lockout Solenoid¬ |
| 808-J2 | 808-J2L |
| 808-K2 | 808-K2L |
| 808-M2 | 808-M2L |
| 808-R2 | 808-R2L |
Approximate Shipping Weights
Without lockout solenoid — 6 lbs (2.7 kg)
With lockout solenoid — 7-1/2 lbs (3.4 kg)
Figure 4 — Flange Mounting (Four-Point)
|
| Flange Mounting (Four Point) | |
| Cat. No. | |
| Without Lockout Solenoid | With Lockout Solenoid¬ |
| 808-J3 | 808-J3L |
| 808-K3 | 808-K3L |
| 808-M3 | 808-M3L |
| 808-R3 | 808-R3L |
| ¬ If lockout solenoid is used, see dotted portion of Figure 1 (on previous page) for dimensions. | |
Approximate Shipping Weights
Without lockout solenoid — 6 lbs (2.7 kg)
With lockout solenoid — 7-1/2 lbs (3.4 kg)
Type 7 & 9
Figure 5 — Base Mounting
|
| Base Mounting | |
| Cat. No. | |
| Without Lockout Solenoid | With Lockout Solenoid |
| 808-J17 | 808-J17L |
| 808-K17 | 808-K17L |
| 808-M17 | 808-M17L |
| 808-R17 | 808-R17L |
Approximate Shipping Weights
Without lockout solenoid — 10 lbs (4.6 kg)
With lockout solenoid — 11-1/2 lbs (5.2 kg)