22 mm IEC

Catalogs > Industrial Controls Catalog > Push Buttons > 22 mm IEC > Bulletin 800F 22.5 mm Push Buttons

Bulletin 800F 22.5 mm Push Buttons

Product Selection

Momentary Push Button Operators, Non-Illuminated — Flush, Extended, Guarded

Flush Operator Cat. No. 800FP-F3		Extended Operator Cat. No. 800FM-E4		Guarded Operator Cat. No. 800FP-G6

Color	Pkg. Quantity	Flush		Extended
		Plastic	Metal	Plastic	Metal
		Cat. No.	Cat. No.	Cat. No.	Cat. No.
Black	1	800FP-F2	800FM-F2	800FP-E2	800FM-E2
Green		800FP-F3	800FM-F3	800FP-E3	800FM-E3
Red		800FP-F4	800FM-F4	800FP-E4	800FM-E4

800F	P	–	F		3	–
	a		b		c		d

a			b			c			d
Operator Construction			Operator Type			Color Cap			Packaging
Code	Description		Code	Description		Code	Color		Code	Description
P	Round plastic operator (IP66, Type 4/4X/13)		F	Flush		0	Orange		Blank	1 per package
M	Round metal operator (IP66, Type 4/13)		E	Extended		1	White		BP	10 per package‡
			G	Guarded		2	Black
						3	Green
						4	Red
						5	Yellow
						6	Blue
						8	Gray¬
						9	No cap
						X	Assortment packT

¬ Available in flush only.
T Assortment pack contains one cap of each color, not available in BP packaging.
‡ Only available with no color cap (9 from Table c).

Momentary Push Button Operators, Non-Illuminated — with Two-Color Molded Legend Caps

Flush Operator Cat. No. 800FP-F301

Button Color	Text Color	Legend Text	Pkg. Quantity	Flush		Extended
				Plastic	Metal	Plastic	Metal
				Cat. No.	Cat. No.	Cat. No.	Cat. No.
Green	White	START	1	800FP-F301	800FM-F301	–	–
		I		800FP-F306	800FM-F306	–	–
Red	White	STOP		800FP-F402	800FM-F402	800FP-E402	800FM-E402
		O		–	–	800FP-E405	800FM-E405
Black	White	→		800FP-F208	800FM-F208	800FP-E208	800FM-E208

800F	P	–	F		3		01
	a		b		c		d

a			b			c			d
Operator Construction			Operator Type			Color Cap			Legend Text¬ T ‡ §
Code	Description		Code	Description		Code	Color		Code	Text
P	Round plastic operator (IP66, Type 4/4X/13)		F	Flush		0	Orange		Blank	No Text
M	Round metal operator (IP66, Type 4/13)		E	Extended		1	White		01	START
			G	Guarded		2	Black		02	STOP
						3	Green		05	O
						4	Red		06	I
						5	Yellow		08	→
						6	Blue		09	Forward§
									10	Reverse§
									11	R

¬ For custom laser-engraved legend cap, order “no cap” option on Momentary Push Button Operators, Non-Illuminated — Flush, Extended, Guarded plus custom laser-engraved cap on Custom Laser-Engraved Caps and Diffusers.
T White and yellow caps have black text. All other color caps have white text.
§ Legend button cap supplied loose for customer installation.
§ Available for flush only.
‡ Valid color cap/legend text codes include:

Color	Text
	Flush Caps	Extended Caps
White	FORWARD, REVERSE, START, I,→ , R	→ , R
Black	FORWARD, REVERSE, → , R	STOP, O,→ , R
Green	FORWARD, REVERSE, START, I,→	→
Red	FORWARD, REVERSE, STOP, O, →	STOP, O,→
Yellow	FORWARD, REVERSE, →	→
Blue	FORWARD, REVERSE, → , R	→ , R

Momentary Push Button Operators, Illuminated — Flush, Extended, Guarded

Flush Operator Cat. No. 800FM-LF4		Extended Operator Cat. No. 800FP-LE3		Guarded Operator Cat. No. 800FP-LG3

Color	Pkg. Quantity	Flush		Extended
		Plastic	Metal	Plastic	Metal
		Cat. No.	Cat. No.	Cat. No.	Cat. No.
Green	1	800FP-LF3	800FM-LF3	800FP-LE3	800FM-LE3
Red		800FP-LF4	800FM-LF4	800FP-LE4	800FM-LE4
Yellow		800FP-LF5	800FM-LF5	800FP-LE5	800FM-LE5
Clear		800FP-LF7	800FM-LF7	800FP-LE7	800FM-LE7

800F	P	–	LE		3	–
	a		b		c		d

a			b			c			d
Operator Construction			Operator Type			Color Cap ¬			Packaging
Code	Description		Code	Description		Code	Color		Code	Description
P	Round plastic operator (IP66, Type 4/4X/13)		LF	Flush		0	Amber		Blank	1 per package
M	Round metal operator (IP66, Type 4/13)		LE	Extended		3	Green		BP	10 per package‡
			LG	Guarded		4	Red
						5	YellowT
						6	Blue
						7	Clear
						9	No cap

¬ For custom laser-engraved operator, order operator with applicable lens cap color plus custom laser-engraved diffuser; see Custom Laser-Engraved Caps and Diffusers.
T When using LED for illumination, a white LED is recommended.
‡ Only available with no color cap (9 from Table c).

Push-to-Test Push Button Device Schematic

Illuminated push buttons may be wired as a push-to-test device by using the following schematic and Cat. No. 800F-XD7 Diode module from Other Accessories.



Alternate Action Operators — Non-Illuminated

Cat. No. 800FM-FA3

800F	M	–	FA		3
	a		b		c

a			b			c
Operator Construction			Operator Type¬			Color CapT
Code	Description		Code	Description		Code	Color
P	Round plastic operator (IP66, Type 4/4X/13)		FA	Non-illuminated, Flush, Alternate Action		0	Orange
M	Round metal operator (IP66, Type 4/13)					1	White
						2	Black
						3	Green
						4	Red
						5	Yellow
						6	Blue
						9	No cap
						X	Assortment pack

¬ Must use N.O.E.M. or N.C. Contacts.
T For custom laser-engraved legend cap, order "no cap" option plus custom laser-engraved cap on Custom Laser-Engraved Caps and Diffusers.

Alternate Action Operators — Illuminated

Cat. No. 800FP-LFA3

800F	P	–	LFA		3
	a		b		c

a			b			c
Operator Construction			Operator Type§ §			Color CapØ
Code	Description		Code	Description		Code	Color
P	Round plastic operator (IP66, Type 4/4X/13)		LFA	Illuminated, Flush, Alternate Action		0	Amber
M	Round metal operator (IP66, Type 4/13)					3	Green
						4	Red
						5	Yellowz
						6	Blue
						7	Clear
						9	No lens

§ Must use N.O.E.M. or N.C. Contacts.
§ LED module required for illumination, can not use incandescent module.
Ø For custom laser-engraved operator, order operator with applicable lens cap color plus custom laser-engraved diffuser on Custom Laser-Engraved Caps and Diffusers.
z When using LED for illumination, a white LED is recommended.

Pilot Light Operators¬ 

Plastic Pilot Light Cat. No. 800FP-P7		Metal Pilot Light Cat. No. 800FM-P4

Color	Pkg. Quantity	Plastic	Metal
		Cat. No.	Cat. No.
Green	1	800FP-P3	800FM-P3
Red		800FP-P4	800FM-P4
Yellow		800FP-P5	800FM-P5

800F	P	–	P		3	–
	a		b		c		d

a			b			c			d
Operator Construction			Operator Type			Lens Cap¬			Packaging
Code	Description		Code	Description		Code	Color		Code	Description
P	Round plastic operator (IP66, Type 4/4X/13)		P	Diffuser		0	Amber		Blank	1 per package
M	Round metal operator (IP66, Type 4/13)					3	Green		BP	10 per package
						4	Red
						5	YellowT
						6	Blue
						7	Clear
						9	No lens

¬ For custom laser-engraved pilot light, order pilot light with applicable lens cap color plus custom laser-engraved diffuser on Custom Laser-Engraved Caps and Diffusers.
T When using LED for illumination, a white LED is recommended.

2-Position Selector Switch Operators, Non-Illuminated

Standard Knob Cat. No. 800FP-SM22		Knob Lever Cat. No. 800FP-HM22

Switching Angle

Target Table and Operator Position¬
Contact Type§
N.O.	O	X
N.C.	X	O
Note: X = Closed/O = Open
§ Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options.

Color	Operator Type		Pkg. Quantity	Standard Knob
				Plastic	Metal
				Cat. No.	Cat. No.
Black with White Insert			1	800FP-SM22	800FM-SM22
¬ Target table for spring return from left is reversed from what is shown in the table.

800F	P	–	S		M2		2			–
	a		b		c		d		e		f

a			b			c
Operator Construction			Operator Type			Operator Function
Code	Description		Code	Description		Code	Type
P	Round plastic operator (IP66, Type 4/4X/13)		S	Standard knob		M2	Maintained (60° switching angle)
M	Round metal operator (IP66, Type 4/13)		H	Knob leverT
						L2	Spring return from left (60° switching angle)
						R2	Spring return from right (60° switching angle)

d				e			f
Knob/Insert Color				Orientation			Packaging
Code	Knob Color	Insert Color		Code	Description		Code	Description
2	Black	White		Blank	Standard		Blank	1 per package
				N	90° offset‡		BP	10 per package§

T 30 mm hole spacing will not work if knob lever is used. See page Panel Hole Spacing for recommended operator panel spacing.
‡ For use in vertical mount Bul. 800F enclosures.
§ Not available with 90° offset orientation.

2-Position Selector Switch Operators, Illuminated

Standard Knob§  Cat. No. 800FP-LSM26

Switching Angle

Target Table and Operator Position¬
Contact TypeØ
N.O.	O	X
N.C.	X	O
Note: X = Closed/O = Open
Ø Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options.

Color	Operator Type		Pkg. Quantity	Standard Knob
				Plastic	Metal
				Cat. No.	Cat. No.
Green			1	800FP-LSM23	800FM-LSM23
Red				800FP-LSM24	800FM-LSM24
Yellow				800FP-LSM25	800FM-LSM25
¬ Target table for spring return from left is reversed from what is shown in the table.

800F	P	–	LS		M2		3
	a		b		c		d		e

a			b			c
Operator Construction			Operator Type			Operator Function
Code	DescriptionT		Code	Description		Code	Type
P	Round plastic operator (IP66, Type 4/4X/13)		LS	Standard knob		M2	Maintained (60° switching angle)
M	Round metal operator (IP66, Type 4/13)		LH	Knob lever§
						L2	Spring return from left (60° switching angle)
						R2	Spring return from right (60° switching angle)

d				e
Knob/Insert Color				Orientation
Code	Knob Color	Insert Color		Code	Description
0	Amber	White		Blank	Standard
3	Green	White		N	90° offset‡
4	Red	White
5	YellowØ	Black
6	Blue	White
7	Clear	Black

T LED module required for illumination, can not use incandescent module.
‡ For use in vertical mount enclosures.
§ Crevices may exist on product that may be unsuitable for certain applications. Please consult your local Rockwell Automation sales office or Allen-Bradley distributor.
§ Only available in clear.
Ø When using LED for illumination, a white LED is recommended.

3-Position Selector Switch Operators, Non-Illuminated

Standard Knob Cat. No. 800FP-SM32		Knob Lever Cat. No. 800FM-HM32

Switching Angle

Target Table and Operator Position (60° Switching Angle)
Contact Type§	Position on Mounting Latch
N.O.	Left	X	O	O
	Right	O	O	X
	Center	X	O	X
	Center CL‡	X	O	O
	Center CR‡	O	O	X
N.C.	Left	O	X	X
	Right	X	X	O
	Center	O	X	O
	Center CL‡	O	X	X
	Center CR‡	X	X	O
Note: X = Closed/O = Open
§ Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options.

Color	Operator Type			Pkg. Quantity	Standard Knob		Knob Lever
					Plastic	Metal	Plastic	Metal
					Cat. No.	Cat. No.	Cat. No.	Cat. No.
Black with White Insert				1	800FP-SM32	800FM-SM32	800FP-HM32	800FM-HM32
					800FP-SB32	800FM-SB32	800FP-HB32	800FM-HB32

800F	P	–	S		M3		2
	a		b		c		d		e		f

a			b			c			d
Operator Construction			Operator Type			Operator Function			Knob/Insert Color
Code	Description		Code	Description		Code	Type		Code	Knob Color	Insert Color
P	Round plastic operator (IP66, Type 4/4X/13)		S	Standard knob		M3	Maintained		2	Black	White
M	Round metal operator (IP66, Type 4/13)		H	Knob lever¬
						L3	Spring return from left
						R3	Spring return from right
						B3	Spring return from left and right

e			f
Orientation			Operation
Code	Description		Code	Description
Blank	Standard		Blank	Standard
N	90° offsetT		CL	Center Left‡
			CR	Center Right‡

¬ 30 mm hole spacing will not work if knob lever is used. See page Panel Hole Spacing for recommended operator panel spacing.
T For use in vertical mount enclosures.
‡ The center contact block can have the same target output as the left or right contact block, by specifying CenterLeft (CL) or CenterRight (CR) option.

3-Position Selector Switch Operators, Illuminated

Standard Knob‡  Cat. No. 800FP-LSM37

Switching Angle

Target Table and Operator Position (60° Switching Angle)
Contact Type§	Position on Mounting Latch
N.O.	Left	X	O	O
	Right	O	O	X
N.C.	Left	O	X	X
	Right	X	X	O
Note: X = Closed/O = Open
§ Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options.

Operator Type			Pkg. Quantity	Green		Red		Yellow
				Plastic	Metal	Plastic	Metal	Plastic	Metal
				Cat. No.	Cat. No.	Cat. No.	Cat. No.	Cat. No.	Cat. No.
			1	800FP-LSM33	800FM-LSM33	800FP-LSM34	800FM-LSM34	800FP-LSM35	800FM-LSM35
				800FP-LSR33	800FM-LSR33	800FP-LSR34	800FM-LSR34	800FP-LSR35	800FM-LSR35
				800FP-LSL33	800FM-LSL33	800FP-LSL34	800FM-LSL34	800FP-LSL35	800FM-LSL35
				800FP-LSB33	800FM-LSB33	800FP-LSB34	800FM-LSB34	800FP-LSB35	800FM-LSB35

800F	P	–	LS		M3		3
	a		b		c		d		e

a			b			c
Operator Construction			Operator Type			Operator Function
Code	Description¬		Code	Description		Code	Type
P	Round plastic operator (IP66, Type 4/4X/13)		LS	Standard knob		M3	Maintained
M	Round metal operator (IP66, Type 4/13)		LH	Knob lever§		L3	Spring return from left
						R3	Spring return from right
						B3	Spring return from left and right

d				e
Knob/Insert Color				Orientation
Code	Knob Color	Insert Color		Code	Description
0	Amber	White		Blank	Standard
3	Green	White		N	90° offsetT
4	Red	White
5	YellowØ	Black
6	Blue	White
7	Clear	Black

¬ LED module required for illumination, can not use incandescent module.
T For use in vertical mount 800F enclosures.
‡ Crevices may exist on product that may be unsuitable for certain applications. Please consult your local Rockwell Automation sales office or Allen-Bradley distributor.
§ Only available in clear.
Ø When using LED for illumination, a white LED is recommended.

4-Position Selector Switch Operators, Non-Illuminated

Standard Knob Cat. No. 800FP-SM42

Target Table and Operator Position¬
Contact Type§	Position on Mounting Latch
N.O.	Left	O	O	X	O
	Right	X	O	O	O
	Center	X	O	X	O
	Center CL	O	O	X	O
	Center CR	X	O	O	O
N.C.E.B.	Left	O	O	O	X
	Right	O	X	O	O
	Center CL	O	O	O	X
	Center CR	O	X	O	O
N.C.L.B.	Left	X	X	O	X
	Right	O	X	X	X
	Center	O	X	O	X
	Center CL	X	X	O	X
	Center CR	O	X	X	X
Note: X = Closed/O = Open
§ Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options.

Color	Standard Knob — Maintained		Pkg. Quantity
	Plastic	Metal
	Cat. No.	Cat. No.
Black with White Insert	800FP-SM42	800FM-SM42	1

800F	P	–	S		M4		2
	a		b		c		d		e		f

a			b			c			d
Operator Construction			Operator Type			Operator Function			Knob/Insert Color
Code	Description		Code	Description		Code	Type		Code	Knob Color	Insert Color
P	Round plastic operator (IP66, Type 4/4X/13)		S	Standard knob		M4	Maintained (45° switching angle)		2	Black	White
M	Round metal operator (IP66, Type 4/13)		H	Knob lever

e			f
Orientation			Operation
Code	Description		Code	Description
Blank	Standard		Blank	Standard
N	90° offsetT		CL	Center Left‡
			CR	Center Right‡

¬ Cannot use N.C. or N.O.E.M. contact blocks with 4-position selector switch. Must use N.O., N.C.E.B., or N.C.L.B. contact blocks.
T For use in vertical mount enclosures.
‡ The center contact block can have the same target output as the left or right contact block, by specifying CenterLeft (CL) or CenterRight (CR) option.

2-Position Key Operated Selector Switches, Non-Illuminated

Key Selector Switch Cat. No. 800FP-KM21R

Switching Angle

Target Table and Operator Position¬
Contact TypeØ
N.O.	O	X
N.C.	X	O
Note: X = Closed/O = Open
Ø Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options.

Key Removal Position	Operator Type		Pkg. Quantity	Key Selector Switch Operators
				Plastic	Metal
				Cat. No.	Cat. No.
Left			1	800FP-KM21	800FM-KM21
Both				800FP-KM23	800FM-KM23
¬ Target table for spring return from left is reversed from what is shown in the table.

800F	M	–	KM2		1
	a		b		c		d

a

b

c

d

Operator Construction

Operator Type

Key Removal PositionT

Ronis Key Lock‡ § §

Code

Description

Code

Type

Code

Position

Code

Key No.

P

Round plastic operator (IP66, Type 4/13)

KM2

Maintained (60° switching angle)

1

Left

Blank

3825 (Standard)

M

Round metal operator (IP66, Type 4/13)

KL2

Spring return from left (60° switching angle)

2

Right

R

455

KR2

Spring return from right (60° switching angle)

3

Both

01R

3801

02R

3802

03R

3803

04R

3804

05R

3805

06R

3806

27R

4001

28R

4002

29R

4003

30R

4004

31R

4005

32R

4006

33R

4007

T Key removal in maintained positions only.
‡ Keyed operators are IP66, Type 4/13.
§ Not intended for high security applications. Interoperability is possible with certain key/cylinder lock combinations. Consult your local Rockwell Automation sales office or Allen-Bradley distributor for interoperability information.
§ For Ronis replacement keys, see Accessories, Other Accessories.

3-Position Key Operated Selector Switches, Non-Illuminated

Key Operated Selector Switch Cat. No. 800FP-KM31R		Key Operated Selector Switch Cat. No. 800FM-KM31R

Switching Angle

Target Table and Operator Position
Contact TypeØ	Position on Mounting Latch
N.O.	Left	X	O	O
	Right	O	O	X
	Center	X	O	X
N.C.	Left	O	X	X
	Right	X	X	O
	Center	O	X	O
Note: X = Closed/O = Open
Ø Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options.

Key Removal Position	Operator Position			Pkg. Quantity	Key Selector Switch Operators
					Plastic	Metal
					Cat. No.	Cat. No.
Left				1	800FP-KM31	800FM-KM31
All					800FP-KM33	800FM-KM33
Center					800FP-KM34	800FM-KM34
Center					800FP-KB34	800FM-KB34

800F	M	–	KM3		3
	a		b		c		d

a			b				c				d
Operator Construction			Operator Type				Key Removal Position¬				See 2-Position Key Operated Selector Switches, Non-Illuminated for optional key codesT ‡ §
Code	Description		Code	Description			Code	Type
P	Round plastic operator (IP66, Type 4/13)		KM3	Maintained			1	Left
M	Round metal operator (IP66, Type 4/13)		KR3	Spring return from right			3	All
			KL3	Spring return from left			4	Center
			KB3	Spring return from both			5	Left/center
			KB3	Spring return from both			7§	Center/right

¬ Key removal in maintained positions only.
T Keyed operators are IP66, Type 4/13.
‡ Not intended for high security applications. Interoperability is possible with certain key/cylinder lock combinations. Consult your local Rockwell Automation sales office or Allen-Bradley distributor for interoperability information.
§ For Ronis replacement keys, see Accessories, Other Accessories.
§ Key removal position only valid with operator types 800F_-KM3 and 800F_-KL3.

Emergency Stop Operators¬ 

Non-Illuminated Twist-to-Release, Push-Pull

60 mm Non-Illuminated Twist-to-Release Cat. No. 800FP-MT64		40 mm Non-Illuminated Push-Pull Cat. No. 800FP-MP44

Color	Size	Pkg. Quantity	Twist-to-Release (Trigger Action)		Push-Pull (Trigger Action)
			Plastic	Metal	Plastic	Metal
			Cat. No.	Cat. No.	Cat. No.	Cat. No.
Red	30	1	800FP-MT34	800FM-MT34	–	–
	40		800FP-MT44	800FM-MT44	800FP-MP44	800FM-MP44
	60		800FP-MT64	800FM-MT64	–	–

Illuminated — Twist-to-Release, Push-Pull‡ 

40 mm Illuminated Twist-to-Release Cat. No. 800FP-LMT44		40 mm Mushroom Push/Pull Cat. No. 800FM-LMP44

Color	Size	Pkg. Quantity	Twist-to-Release (Trigger Action)		Push-Pull (Trigger Action)
			Plastic	Metal	Plastic	Metal
			Cat. No.	Cat. No.	Cat. No.	Cat. No.
Red	30	1	–	–	800FP-LMP34	800FM-LMP34
	40		800FP-LMT44	800FM-LMT44	800FP-LMP44	800FM-LMP44
	60		800FP-LMT64	800FM-LMT64	800FP-LMP64	800FM-LMP64
‡ LED module required for illumination, can not use incandescent module.

Key Release Mushroom Operator

40 mm Non-Illuminated Key Release Cat. No. 800FP-MK44

Color	Size	Pkg. Quantity	Ronis Key Lock (Trigger Action)T
			Plastic	Metal
			Cat. No.	Cat. No.
Red	40 mm	1	800FP-MK44	800FM-MK44
¬ All emergency stop operators are EN ISO 13850 compliant with standard NC, NCLB, or self-monitoring contact blocks.
T For key options, see 2-Position Non-Illuminated Operators — Mushroom, Key Release (Trigger Action)¬ .

2-Position Push-Pull Operators, Non-Illuminated — Twist-to-Release (Trigger Action), Push-Pull (Trigger Action)¬ 

40 mm Trigger Action Twist-to-Release Mushroom Cat. No. 800FP-MT44		40 mm Trigger Action Push-Pull Mushroom Cat. No. 800FP-MP44		90 mm Half-Dome Cat. No. 800FP-MP94

Color	Pkg. Quantity	40 mm Mushroom (Trigger Action) Twist-to-Release		40 mm Mushroom (Trigger Action) Push-Pull
		Plastic	Metal	Plastic	Metal
		Cat. No.	Cat. No.	Cat. No.	Cat. No.
Red	1	800FP-MT44	800FM-MT44	800FP-MP44	800FM-MP44

800F	P	–	MT4		4
	a		b		c		d

a			b			c			d‡ § §
Operator Construction			Operator Type			Color Cap			Engraving
Code	Description		Push, Twist-to-ReleaseØ			Code	Color		Code	Description
			Code	Type
P	Round plastic operator (IP66, Type 4/4X/13)		MT3	30 mm color cap		2	Black		Blank
M	Round metal operator (IP66, Type 4/13)		MT4	40 mm color cap		3	Green		LE	EMO laser engraved
			MT6	60 mm color cap		4	Red		E	EMO printed
			Push-Pull			5	Yellow
			Code	Type		6	Blue
			MP4	40 mm color cap
			Half-Dome Push-Pull
			Code	Type
			MP9	90 mm color capT

¬ All emergency stop operators are EN ISO 13850 compliant with standard NC, NCLB, or self-monitoring contact blocks.
Ø Only available with red color cap.
‡ For EMO guards, see .
§ Only available on 40 mm color cap.
§ Only available on red, 40 mm push, twist-to-release operator type (MT44).
T Half-dome operators only available with black, red, and yellow color caps.

2-Position Push-Pull Operators, Illuminated — Twist-to-Release (Trigger Action), Push-Pull (Trigger Action)¬ T 

40 mm Illuminated Twist-to-Release Cat. No. 800FP-LMT44		40 mm Mushroom Push/Pull Cat. No. 800FM-LMP44		90 mm Half-Dome Cat. No. 800FP-LMP94

Color	Pkg. Quantity	40 mm Mushroom (Trigger Action) Twist-to-Release		40 mm Mushroom (Trigger Action) Push-Pull
		Plastic	Metal	Plastic	Metal
		Cat. No.	Cat. No.	Cat. No.	Cat. No.
Red	1	800FP-LMT44	800FM-LMT44	800FP-LMP44	800FM-LMP44

800F	P	–	LMP4		3
	a		b		c

a			b			c
Operator Construction			Operator Type			Lens Cap Color
Code	Description		Push, Twist-to-Release‡ §			Code	Color
			Code	Type
P	Round plastic operator (IP66, Type 4/4X/13)		LMT4	40 mm color cap		3	Green
M	Round metal operator (IP66, Type 4/13)		LMT6	60 mm color cap		4	Red
			Push-Pull			5	YellowØ
			Code	Type		6	Blue§
			LMP3	30 mm color cap
			LMP4	40 mm color cap
			LMP6	60 mm color cap
			Half-Dome Push-Pull
			Code	Type
			LMP9	90 mm color capz

¬ LED module required for illumination, can not use incandescent module.
T All emergency stop operators are EN ISO 13850 compliant with standard NC, NCLB, or self-monitoring contact blocks.
‡ Only available with red color cap.
§ 60 mm version has black arrows; 30 and 40 mm versions have white arrows.
Ø When using LED for illumination, a white LED is recommended.
§ Only available with 40 mm Push-Pull color cap (LMP4 from Table b).
z Half-dome operators only available with red and yellow lens cap colors.

2-Position Non-Illuminated Operators — Mushroom, Key Release (Trigger Action)¬ 

40 mm Key Release Mushroom Cat. No. 800FP-MK44

Color	Pkg. Quantity	2-Position (Trigger Action) 40 mm Mushroom Key Release
		Plastic	Metal
		Cat. No.	Cat. No.
Red	1	800FP-MK44	800FM-MK44
Note:For Ronis replacement keys, see Accessories, page Other Accessories. Key release mushroom operators use key no. 3825.

800F	P	–	MK4		4
	a		b		c		d

a			b			c			d
Operator Construction			Operator Type			Lens Cap Color			Ronis Key LockT ‡ §
Code	Description		Key Release Mushroom			Code	Color		Code	Key No.
P	Round plastic operator (IP66, Type 4/13)		Code	Type		4	Red		Blank	3825 (Standard)
M	Round metal operator (IP66, Type 4/13)		MK4	40 mm					R	455
									01R	3801
									02R	3802
									03R	3803
									04R	3804
									05R	3805
									06R	3806
									27R	4001
									28R	4002
									29R	4003
									30R	4004
									31R	4005
									32R	4006
									33R	4007

¬ All emergency stop operators are EN ISO 13850 compliant with standard NC, NCLB, or self-monitoring contact blocks.
T Keyed operators are IP66, Type 4/13.
‡ Not intended for high security applications. Interoperability is possible with certain key/cylinder lock combinations. Consult your local Rockwell Automation sales office or Allen-Bradley distributor for interoperability information.
§ For Ronis replacement keys, see Accessories, Other Accessories.

3-Position Push-Pull Operators, Illuminated & Non-Illuminated — Mushroom§ 

Illuminated 3-Position Push-Pull Cat. No. 800FM-LMP44E3

Target Table and Operator Position¬
Contact Typeª
	Out	Center	In
N.O.	O	O	X
N.C.E.B.	X	O	O
N.C.L.B.	X	X	O
Note:X = Closed/O = Open
ª Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options.

Operator Function	Operator Type	Color	Pkg. Quantity	Cat. No.
Momentary Out, Maintained Center, Momentary In	Non-Illuminated	Black§	1	800FM-MM42E3
		Green		800FM-MM43E3
		Red		800FM-MM44E3
	IlluminatedT	Amber‡		800FM-LMM40E3
		Green		800FM-LMM43E3
		Red		800FM-LMM44E3
		Blue‡		800FM-LMM46E3
		Clear‡		800FM-LMM47E3
Momentary Out, Maintained Center, Maintained In	Non-Illuminated	Black§	1	800FM-MP42E3
		Green		800FM-MP43E3
		Red		800FM-MP44E3
	IlluminatedT	Amber‡		800FM-LMP40E3
		Green		800FM-LMP43E3
		Red		800FM-LMP44E3
		Blue‡		800FM-LMP46E3
		Clear‡		800FM-LMP47E3
¬ Cannot use N.C. or N.O.E.M. contact blocks with 3-position push-pull operators. Must use N.O., N.C.E.B., or N.C.L.B. contact blocks.
T Available in integrated LED version only.
‡ Available in illuminated only.
§ Available in non-illuminated only.

800F	M	–	L		MM		4		4		E3
	a		b		c		d		e		f

a			b			c
Operator Construction			Operator Type			Operator Function
Code	Description		Code	Description		Code	Description
M	Round metal operator (IP66, Type 4/13)		Blank	Non-Illuminated		MM	Momentary Out, Maintained Center, Momentary In
			L	IlluminatedT		MP	Momentary Out, Maintained Center, Maintained In

d			e			f
Cap Size			Cap Color			Positions
Code	Description		Code	Description		Code	Description
4	40 mm Plastic		0	Amber‡		E3	3-Position
			2	Black§
			3	Green
			4	Red
			6	Blue‡
			7	Clear‡

§ Sold as stand-alone operator only. Not available as a composite catalog number.
¬ Cannot use N.C. or N.O.E.M. contact blocks with 3-position push-pull operators. Must use N.O., N.C.E.B., or N.C.L.B. contact blocks.
T Available in integrated LED version only.
‡ Available in illuminated only.
§ Available in non-illuminated only.

Momentary Push Button Operators, Non-Illuminated — Mushroom¬ 

40 mm Mushroom Cat. No. 800FM-MM42		60 mm Mushroom Cat. No. 800FP-MM63		90 mm Mushroom Cat. No. 800FP-MM94

Color	Pkg. Quantity	40 mm Mushroom		60 mm Mushroom
		Plastic	Metal	Plastic	Metal
		Cat. No.	Cat. No.	Cat. No.	Cat. No.
Black	1	800FP-MM42	800FM-MM42	800FP-MM62	800FM-MM62
Green		800FP-MM43	800FM-MM43	800FP-MM63	800FM-MM63
Red		800FP-MM44	800FM-MM44	800FP-MM64	800FM-MM64
Yellow		800FP-MM45	800FM-MM45	800FP-MM65	800FM-MM65
Blue		800FP-MM46	800FM-MM46	800FP-MM66	800FM-MM66
¬ Momentary mushroom operators are IP65 rated.

800F	P	–	MM4		3
	a		b		c

a			b			c
Operator Construction			Size and Operator Type			Color Cap
Code	Description		Mushroom			Code	Color
P	Round plastic operator (IP65, Type 4/4X/13)		Code	Type		2	Black
M	Round metal operator (IP65, Type 4/13)		MM4	40 mm momentary		3	Green
			MM6	60 mm momentary		4	Red
			MM9	90 mm momentaryT		5	Yellow
						6	Blue

¬ Momentary mushroom operators are IP65 rated.
T Only available with black, red, and yellow cap colors.

Momentary Push Button Operators, Illuminated — Mushroom¬ 

40 mm Mushroom Cat. No. 800FP-LMM43

Color	Pkg. Quantity	40 mm Mushroom
		Plastic	Metal
		Cat. No.	Cat. No.
Green	1	800FP-LMM43	800FM-LMM43
Red		800FP-LMM44	800FM-LMM44
Yellow		800FP-LMM45	800FM-LMM45
Blue		800FP-LMM46	800FM-LMM46
Clear		800FP-LMM47	800FM-LMM47

800F	P	–	LMM4		3
	a		b		c

a			b			c
Operator Construction			Size and Operator Type			Lens Cap Color
Code	Description		Mushroom			Code	Color
P	Round plastic operator (IP65, Type 4/4X/13)		Code	Type		3	Green
M	Round metal operator (IP65, Type 4/13)		LMM4	40 mm momentary		4	Red
						5	YellowT
						6	Blue
						7	Clear

¬ Momentary mushroom operators are IP65 rated.
T When using LED for illumination, a white LED is recommended.

2-Function Momentary Multi-Operator, Non-Illuminated

2-Function Momentary Multi-Operator Non-Illuminated Cat. No. 800FP-U2E4F3

Position A			Position C			Pkg. Quantity	Plastic
Color	Type	Text	Color	Type	Text		Cat. No.
Red	Extended	Blank	Green	Flush	Blank	1	800FP-U2E4F3
		O			I		800FP-U2EFFE
		STOP			START		800FP-U2EBFA

800F	P	–	U2		E		4		F		3
	a		b		c		d		e		f

(with button caps)

800F	P	–	U2		X
	a		b		c

(without button caps)

¬ 

a			b			c			d
Operator Construction			Operator Type			Operator Type — Position A¬			Operator Color Cap/Text — Position A‡
Code	Description		Code	Description		Code	Description		Code	Description
P	Plastic operator (IP66, Type 4/4X)		U2	Two-function		F	Flush		1	White
M	Metal operator (IP66, Type 4)					E	Extended		2	Black
						X	No caps (all positions)T		3	Green
									4	Red
									5	Yellow
									6	Blue
									A	Green with “Start” text
									B	Red with “Stop” text
									C	White with “Start” text
									D	Black with “Stop” text
									E	Green with “I” text
									F	Red with “O” text§
									G	White with “I” text
									H	Black with “O” text

e			f
Operator Type — Position C¬			Operator Color Cap/Text — Position C‡
Code	Description		Code	Description
F	Flush		1	White
E	Extended		2	Black
			3	Green
			4	Red
			5	Yellow
			6	Blue
			A	Green with “Start” text
			B	Red with “Stop” text
			C	White with “Start” text
			D	Black with “Stop” text
			E	Green with “I” text
			F	Red with “O” text§
			G	White with “I” text
			H	Black with “O” text

¬ Position 1 of the latch (left position when viewed from the back) corresponds to position A of the operator. Position 2 of the latch (right position when viewed from the back) corresponds to position C of the operator.
T For custom-engraved caps, order “no caps” option plus custom engraved caps on page Custom Laser-Engraved Caps and Diffusers.
§ Must be used with an extended cap.
‡ Valid color cap/legend text codes include:

Color	Text
	Flush Caps	Extended Caps
White	START, I	—
Black	—	STOP, O
Green	START, I	—
Red	—	STOP, O

2-Function Momentary Multi-Operator, Illuminated¬ 

2-Function Momentary Multi-Operator Illuminated Cat. No. 800FP-LU2E2E1

Position A			Position B	Position C			Pkg. Quantity	Plastic
Color	Type	Text	Type	Color	Type	Text		Cat. No.
Red	Extended	Blank	White Pilot Light	Green	Flush	Blank	1	800FP-LU2E4F3
		O				I		800FP-LU2EFFE
		STOP				START		800FP-LU2EBFA

800F	P	–	LU2		E		4		F		3
	a		b		c		d		e		f

(with button caps)

800F	P	–	LU2		X
	a		b		c

(without button caps)

T 

a			b			c			d
Operator Construction			Operator Type¬			Operator Type — Position AT			Operator Color Cap/Text — Position A§
Code	Description		Code	Description		Code	Description		Code	Description
P	Plastic operator (IP66, Type 4/4X)		LU2	Two-function Illuminated		F	Flush		1	White
M	Metal operator (IP66, Type 4)					E	Extended		2	Black
						X	No caps (all positions)‡		3	Green
									4	Red
									5	Yellow
									6	Blue
									A	Green with “Start” text
									B	Red with “Stop” text
									C	White with “Start” text
									D	Black with “Stop” text
									E	Green with “I” text
									F	Red with “O” text§
									G	White with “I” text
									H	Black with “O” text

e			f
Operator Type — Position CT			Operator Color Cap/Text — Position C§
Code	Description		Code	Description
F	Flush		1	White
E	Extended		2	Black
			3	Green
			4	Red
			5	Yellow
			6	Blue
			A	Green with “Start” text
			B	Red with “Stop” text
			C	White with “Start” text
			D	Black with “Stop” text
			E	Green with “I” text
			F	Red with “O” text
			G	White with “I” text
			H	Black with “O” text

¬ LED module required for illumination, can not use incandescent module.
T Position 1 of the latch (left position when viewed from the back) corresponds to position A of the operator. Position 2 of the latch (right position when viewed from the back) corresponds to position C of the operator. Position 3 of the latch (center position) is reserved for the power module.
‡ For custom-engraved caps, order “no caps” option plus custom engraved caps on page Custom Laser-Engraved Caps and Diffusers.
§ Must be used with an extended cap.
§ Valid color cap/legend text codes include:

Color	Text
	Flush Caps	Extended Caps
White	START, I	—
Black	—	STOP, O
Green	START, I	—
Red	—	STOP, O

3-Function Momentary Multi-Operator, Non-Illuminated

3-Function Momentary Multi-Operator Non-Illuminated Cat. No. 800FP-U3E4F34

Position A			Position B			Position C			Pkg. Quantity	Plastic
Color	Type	Text	Color	Type	Text	Color	Type	Text		Cat. No.
Green	Flush	Blank	Red	Extended	Blank	Green	Flush	Blank	1	800FP-U3F3F34

800F

P

–

U3

E

4

F

3

4

a

b

c

d

e

f

g

(with button caps)

800F	P	–	U3		X
	a		b		c

(without button caps)

a			b			c			d
Operator Construction			Operator Type			Operator Type — Position A¬			Operator Color Cap/Text — Position A§
Code	Description		Code	Description		Code	Description		Code	Description
P	Plastic operator (IP66, Type 4/4X)		U3	Three-function		F	Flush		1	White
M	Metal operator (IP66, Type 4)					E	Extended		2	Black
						X	No caps (all positions)T ‡		3	Green
									4	Red
									5	Yellow
									6	Blue
									A	Green with “Start” text
									B	Red with “Stop” text
									C	White with “Start” text
									D	Black with “Stop” text
									E	Green with “I” text
									F	Red with “O” text§
									G	White with “I” text
									H	Black with “O” text

e			f			g
Operator Type — Position C¬			Operator Color Cap/Text — Position C§			Operator Color Cap/Text — Position B¬ ‡
Code	Description		Code	Description		Code	Description
F	Flush		1	White		4	Red
E	Extended		2	Black		B	Red with “Stop” text
			3	Green		F	Red with “O” text
			4	Red
			5	Yellow
			6	Blue
			A	Green with “Start” text
			B	Red with “Stop” text
			C	White with “Start” text
			D	Black with “Stop” text
			E	Green with “I” text
			F	Red with “O” text§
			G	White with “I” text
			H	Black with “O” text

¬ Position 1 of the latch (left position when viewed from the back) corresponds to position A of the operator. Position 2 of the latch (right position when viewed from the back) corresponds to position C of the operator. Position 3 of the latch (center position) corresponds to position B of the operator.
T For custom-engraved caps, order “no caps” option plus custom engraved caps on page Custom Laser-Engraved Caps and Diffusers.
‡ For “no caps” option, (position B) center cap available as red, no text only.
§ Must be used with an extended cap.
§ Valid color cap/legend text codes include:

Color	Text
	Flush Caps	Extended Caps
White	START, I	—
Black	—	STOP, O
Green	START, I	—
Red	—	STOP, O

Reset Operators — Mechanical and/or Electrical Reset

Button Color	Legend Text	Pkg. Quantity	Flush — Round
			Plastic	Metal
			Cat. No.	Cat. No.
Blue	R	1	800FP-R611	800FM-R611
	No Legend		800FP-R6	800FM-R6

800F	M	–	R		6		11
	a		b		c		d

a			b			c			d
Operator Construction			Operator Type			Color Cap			Legend Text
Code	Description		Code	Type		Code	Color		Code	Text
P	Round plastic operator (IP66, Type 4/4X/13)		R	Reset¬ T		1	White		Blank	No text
M	Round metal operator (IP66, Type 4/13)					2	Black		11	R
						6	Blue

¬ Will accept latch and up to four single circuit contact blocks or two dual circuit contact blocks; no contacts allowed in center position.
T 11 mm reset stroke length.

Threaded Reset Rod Reset Operators

Rod Length [mm]‡	Rod Length Adjustability [mm]	Pkg. Quantity	Threaded Reset Rod
			10 mm Pusher		35 mm Pusher
			Cat. No.		Cat. No.
40	34…52	1	800F-ATR01		800F-ATR01L
55	50…67		800F-ATR02		800F-ATR02L
85	80…98		800F-ATR04		800F-ATR04L
115	110…128		800F-ATR06		800F-ATR06L
145	141…159		800F-ATR08		800F-ATR08L
315	34…326		§	800F-ATR19	§	800F-ATR19L
‡ If contact blocks are used, they must have a minimum rod length of 55 mm for one level of contact blocks and 85 mm for two levels of contact blocks.
§ Rod is threaded along its entire length. Fully threaded rod can be provided after cutting.

Single Turn Potentiometer AssemblyT ‡ § 

Series B

Resistive Element	Cat. No.
None (Operator Only)¬	800FP-POT
150 W	800FP-POT1
500 W	800FP-POT2
1000 W	800FP-POT3
2500 W	800FP-POT4
5000 W	800FP-POT5
10000 W	800FP-POT6
¬ The Cat. No. 800FP-POT is a complete operator assembly supplied without the resistive element, used with potentiometers having a shaft diameter of 6.0 mm (0.23 in.) and a shaft length of 50.0 mm (1.97 in.), or a shaft diameter of 6.4 mm (0.25 in.) and a shaft length of 22.5 mm (0.88 in.). This operator is used with Type "J" potentiometers only.
T Rated 300V AC/DC, 2 W max.
‡ A latch is not needed.
§ Additional hole spacing required for potentiometers. See Panel Hole Spacing for panel hole spacing requirements.

Key Operated Selector Switch - SensEject^TM

Patent-Pending Spring-Loaded Key Ejection System

2-Position Switching Angle		3-Position Switching Angle

Operator Construction	Operator Type	Key Eject Position	Key Option§ §	Spare Keys	Contact Blocks	Cat. No.Ø
Round Metal Operator — SensEject is IP6X (dust-tight) Type 1	2-Position Maintained		Zadi Key 06Z	800F-AKE006	None	800FM-KEM2106Z
		Left with Key Eject			1 N.O.; 1 N.C.	800FM-KEM2106ZMX11
	3-Position Spring Return from Both		Zadi Key 01Z	800F-AKE001	None	800FM-KEB3401Z
		Center with Key Eject			2 N.O.; 3 N.C.	800FM-KEB3401ZMX23
§ Not intended for high security applications. Interoperability is possible with certain key/cylinder lock combinations. Consult your local Rockwell Automation sales office or Allen-Bradley distributor for interoperability information.
§ Consult your local Rockwell Automation sales office or Allen-Bradley distributor for more key options.
Ø Includes latch and spacer block.

Selector Push Button Operators¬ 

Selector Jog Operator Cat. No. 800FM-SJ23

Target Table and Operator Position (2-Position)
Contact TypeT	Position on Mounting Latch
		Selector Left Free	Selector Left Depressed	Selector Right Free	Selector Right Depressed
N.O.	Left	O	X	O	O
N.O.	Right	O	O	O	X
N.O.	Center	O	X	O	X
N.C.	Left	X	O	X	X
N.C.	Right	X	X	X	O
N.C.	Center	X	O	X	O
Note: X = Closed/O = Open
T Contact selection is limited to the following options, consult your Rockwell Automation distributor for other options.

Target Table and Operator Position (3-Position)
Contact TypeT	Position on Mounting Latch
		Selector Left Free	Selector Left Depressed	Selector Center Free	Selector Center Depressed	Selector Right Free	Selector Right Depressed
N.O.	Left	O	X	O	X	O	O
N.O.	Right	O	O	O	X	O	X
N.O.	Center	O	X	O	X	O	X
N.C.	Left	X	O	X	O	X	X
N.C.	Right	X	X	X	O	X	O
N.C.	Center	X	O	X	O	X	O
Note: X = Closed/O = Open
T Contact selection is limited to the following options; consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options.

800F	P	–	SJ	2	2
	a		b	c	d

a			b			c			d
Operator Construction			Operator Type			Operator Function			Color Cap
Code	Description		Code	Description		Code	Description		Code	Description
P	Round Plastic Operator (IP66,Type 4/4X/13)		SJ	Selector Jog		2	2-Position		2	Black
M	Round Metal Operator (IP66, Type 4/13)					3	3-Position		3	Green

¬ Buttons cannot be engraved.

Toggle Switch Operators¬ T 

Target Table and Operator Position (2-Position)
Contact Type§	Position on Mounting Latch
		Toggle Left	Center	Toggle Right
N.O.	Left	O	O	X
N.O.	Right	X	O	O
N.O.	Center	X	O	X
N.C.	Left	X	X	O
N.C.	Right	O	X	X
N.C.	Center	O	X	O
Note: X = Closed/O = Open
§ Contact selection is limited to the following options, consult your Rockwell Automation distributor for other options.

Target Table and Operator Position (4-Position)‡
Contact Type§	Position on Mounting Latch
		Toggle Up	Toggle Left	Center	Toggle Right	Toggle Down
N.O.	Left	X	O	O	O	O
N.O.	Right	O	X	O	O	O
N.O.	Center	X	X	O	O	O
N.C.L.B.	Left	O	X	X	X	X
N.C.L.B.	Right	X	O	X	X	X
N.C.L.B.	Center	O	O	X	X	X
N.C.E.B.	Left	O	O	O	O	X
N.C.E.B.	Right	O	O	O	X	O
Note: X = Closed/O = Open
§ Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen‑Bradley distributor for other options.

800F	M	–	J	M2
	a		b	c

a			b			c
Operator Construction			Operator Type			Operator Function
Code	Description		Code	Description		Code	Description
M	Round Metal Operator (IP66, Type 4/13)		J	Toggle Switch		M2	2-Position, Maintained
						R2	2-Position, Momentary
						M4	4-Position, Maintained
						R4	4-Position, Momentary

¬ Use legend plates 800F-34_ and 800F-35_.
T Silicone boot comes standard with toggle switch, please see Miscellaneous, Continued for replacement boots.
‡ Cannot use N.C. or N.O.E.M. contact blocks with 4-position toggle switch. Must use N.O., N.C.E.B., or N.C.L.B. contact blocks.

Back-of-Panel Components

Contact Blocks with Latch — Composite

800F	–	P		X		0		1		E
		a		b		c		d		e

a			b			c
Style			Contact Block(s) Termination Style¬			N.O. (Normally Open) Circuits
Code	Description		Code	Description		Code	Description
P	Plastic latch		X	Screw termination		0	No contact
M	Metal latch		Q	Spring-clamp termination		1	1 N.O.
						2	2 N.O.
						3	3 N.O.
						4	4 N.O.
						5	5 N.O.
						6	6 N.O.

d			e
N.C. (Normally Closed) Circuits			Specialty Contact Block(s)
Code	Description		Code	Description
0	No contact		Blank	Standard blocks
1	1 N.C.		V	Low voltage — QuadCONNECT™
2	2 N.C.		E	N.O. early make
3	3 N.C.		L	N.C. late break
4	4 N.C.		B	N.C. early break
5	5 N.C.		S	N.C. self-monitoring
6	6 N.C.

¬ Six circuits maximum allowable.

Power Modules with Latch — Composite

800F	–	M		N		3		G
		a		b		c		d

a			b			c			d
Style			Power Module Type‡ §			Voltage			Lamp Colorz
Code	Description		Code	Description		Code	Description		Code	Description
P	Plastic latch		D	Incandescent module, screw termination		0	No bulb§		C	Incandescent
M	Metal latch		N	Integrated LED module, screw termination		1	6V AC/DC§		R	Red LED
			Q	Integrated LED module, spring-clamp termination		2	12V AC/DC§		G	Green LED
						3	24V AC/DC		Y	Amber LED
						4	48V AC/DC§		W	White LED
						5	120V AC		B	Blue LED
						7	240V ACØ

‡ LED modules for use with all illuminated operators. Incandescent module for use with pilot lights, momentary push buttons, and momentary mushroom operators only.
§ Four circuits maximum allowable when power module is used. Do not stack contact block on power module.
§ Only available for incandescent module.
Ø Only available for integrated LED module.
z For best illumination results, LED color should match lens color. For yellow operator, select a white LED.

Power Modules with Contact Blocks and Latch — Composite

800F

–

P

N

5

R

X

1

0

E

a

b

c

d

e

f

g

h

a			b			c			d
Style			Power Module Type¬ T			Voltage			Lamp Color§
Code	Description		Code	Description		Code	Description		Code	Description
P	Plastic latch		D	Incandescent module, screw termination		0	No bulb‡		C	Incandescent
M	Metal latch		N	Integrated LED module, screw termination		1	6V AC/DC‡		R	Red LED
			Q	Integrated LED module, spring-clamp termination		2	12V AC/DC‡		G	Green LED
						3	24V AC/DC		Y	Amber LED
						4	48V AC/DC‡		W	White LED
						5	120V AC		B	Blue LED
						7	240V AC§

e			f			g			h
Contact Block(s) Termination Style			N.O. (Normally Open) Circuits			N.C. (Normally Closed) Circuits			Specialty Contact Block(s)
Code	Description		Code	Description		Code	Description		Code	Description
X	Screw termination		0	No contact		0	No contact		Blank	Standard blocks
Q	Spring-clamp termination		1	1 N.O.		1	1 N.C.		V	Low voltage — QuadCONNECT™
			2	2 N.O.		2	2 N.C.		E	N.O. early make
			3	3 N.O.		3	3 N.C.		L	N.C. late break
			4	4 N.O.		4	4 N.C.		B	N.C. early break
									S	N.C. self-monitoring

¬ Four circuits maximum allowable when power module is used. Do not stack contact block on power module.
T LED modules for use with all illuminated operators. Incandescent module for use with pilot lights, push buttons, and momentary mushroom operators only.
‡ Only available for incandescent module.
§ Only available for integrated LED module.
§ For best illuminated results, LED should match lens color. For yellow operator, select a white LED.

Other

	Description		Pkg. Quantity	Cat. No.
	Metal Mounting Latch These are zinc-plated, metal die cast mounting latches. Note: Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces.		10	800F-ALM
Cat. No. 800F‑ALM	Note: Sold only in multiples of 100. Order (quantity of) 100 to receive one package of 100 pieces.		100	800F-ALM-BP
	Plastic Mounting Latch Note: Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces.		10	800F-ALP
Cat. No. 800F‑ALP	Note: Sold only in multiples of 100. Order (quantity of) 100 to receive one package of 100 pieces.		100	800F-ALP-BP
	Description	Contact Type	Pkg. Quantity	Cat. No.
	Contact Block Note: Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. Latch not included.	N.O.	10	800F-X10
		N.C.		800F-X01
		N.O. low voltage — QuadCONNECT™		800F-X10V
		N.C. low voltage — QuadCONNECT™		800F-X01V
		N.O.E.M.		800F-X10E
		N.C.L.B.		800F-X01L
		N.C.E.B.		¬	800F-X01B
		Self-Monitoring		T	800F-X01S
		Dual circuit of 2 N.O.		T	800F-X20D
		Dual circuit of 2 N.C.		T	800F-X02D
		Dual circuit of 1 N.O.-1 N.C.		T	800F-X11D
		N.O. with stab terminals		800F-X10T
		N.C. with stab terminals		800F-X01T
		N.O. spring-clamp		800F-Q10
		N.C. spring-clamp		800F-Q01
		N.O. spring-clamp low-voltage — QuadConnect™		800F-Q10V
		N.C. spring-clamp low-voltage — QuadConnect™		800F-Q01V
		N.O.E.M. spring-clamp		800F-Q10E
		N.C.L.B. spring clamp		800F-Q01L
		N.C.E.B. spring-clamp		¬	800F-Q01B
		Ring lug N.O.		‡ §	800F-R10
		Ring lug N.C.		‡ §	800F-R01
Cat. No. 800F‑X10	Note: Sold only in multiples of 100. Order (quantity of) 100 to receive one package of 100 pieces. Latch not included.	N.O.	100	800F-X10-BP
		N.C.		800F-X01-BP
¬ Only for use with 4-position selector switch, 4-position toggle switch, or 3-position push-pull operator.
T Cannot stack.
‡ Cannot be used in a composite catalog number.
§ Replacement screws are available (Cat. No. 800F-ARS1)

Other

	Description	Volts	Pkg. Quantity	Cat. No.
	Incandescent Module For use with pilot lights, push buttons, and momentary mushroom operators. Note: Sold in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. Latch not included.	No bulb	10	800F-D0C
		6V AC/DC		800F-D1C
		12V AC/DC		800F-D2C
		24V AC/DC		800F-D3C
		48V AC/DC		800F-D4C
Cat. No. 800F‑D3C		120V AC/DC		800F-D5C
	Integrated LED Module For use with all illuminated devices. For best results, LED should match lens color. For amber operators, use yellow LED. Note: Sold in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. Latch not included.	24V AC/DC	10	¬	800F-N3x
		120V AC		¬	800F-N5x
		240V AC		¬	800F-N7x
		24V AC/DC spring-clamp		¬	800F-Q3x
		120V AC spring-clamp		¬	800F-Q5x
		240V AC spring-clamp		¬	800F-Q7x
Cat. No. 800F‑N3G		24V AC/DC ring lug		T ‡	800F-R3x
	Description	Contact Material	Pkg. Quantity	Cat. No.
	Base Mounted Contact Block Base mounted contact blocks can be used in plastic or metal enclosures. Note: Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. Latch not included.	N.O.	10	800F-BX10
		N.C.		800F-BX01
		N.O. low voltage — QuadCONNECT™		800F-BX10V
		N.C. low voltage — QuadCONNECT™		800F-BX01V
		N.O.E.M.		800F-BX10E
		N.C.L.B.		800F-BX01L
		N.O. spring-clamp		800F-BQ10
Cat. No. 800F‑BX01		N.C. spring-clamp		800F-BQ01
	Description	Volts	Pkg. Quantity	Cat. No.
	Base Mounted Integrated LED Module Base mounted modules can be used in plastic or metal enclosures. For best illumination results, LED should match lens color. Note: Sold in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. Latch not included.	24V AC/DC	10	¬	800F-BN3x
		120V AC		¬	800F-BN5x
		240V AC		¬	800F-BN7x
		24V AC/DC spring-clamp		¬	800F-BQ3x
		120V AC spring-clamp		¬	800F-BQ5x
Cat. No. 800F‑BN3R		240V AC spring-clamp		¬	800F-BQ7x
¬ To complete the cat. no., replace the x with one of the following letters for the desired color: Y = Amber, R = Red, G = Green, B = Blue, W = White.
T Cannot be used in a composite catalog number.
‡ Replacement screws are available (Cat. No. 800F-ARS1)

Plastic and Metal Enclosures

Plastic Enclosure Cat. No. 800F-3PM		Metal Enclosure Cat. No. 800F-5MM		Pendant Station Cat. No. 800F-P25

Plastic Enclosures (Latch or Base Mounting)

• Accepts two-piece snap-in legends
  
• One-hole enclosure accepts 60 mm emergency stop legends
  
• UL Listed, CSA Certified
  

Metal Enclosures (Latch or Base Mounting)

• Feed-through design
  
• Accepts two-piece snap-in legends
  
• Includes base mount adapter
  

Pendant Stations (Latch Mounting)

• Blank legend cap marking
  
• Connector not included. See Accessories, page Miscellaneous, for ordering information.
  

Type	Pkg. Quantity	Enclosures
		Plastic (IP66, 4/4X)¬		Metal — Die Cast (IP66, 4/13)T
		PG Conduit Knockouts	Metric Conduit Knockouts	PG Conduit Openings	Metric Conduit Openings
		Cat. No.	Cat. No.	Cat. No.	Cat. No.
1-hole	1	800F-1PP	800F-1PM	800F-1MP	800F-1MM
2-hole		800F-2PP	800F-2PM	800F-2MP	800F-2MM
3-hole		800F-3PP	800F-3PM	800F-3MP	800F-3MM
4-hole		800F-4PP	800F-4PM	—	—
5-hole		—	—	800F-5MP	800F-5MM
6-hole		800F-6PP	800F-6PM	—	—
1-hole (yellow)		800F-1YP	800F-1YM	800F-1MYP	800F-1MYM
1-hole (yellow) Latch only		—	—	800F-1LYP	800F-1LYM
¬ Can only use single deep contact block.
T Can stack contact blocks two deep or one dual circuit contact block.

Type	Knockout/Conduit Openings for Enclosures
	Plastic		Metal
	PG	Metric	PG	Metric
	Cat. No.	Cat. No.	Cat. No.	Cat. No.
1-hole	PG11/16	M16/20	PG16	M20
2-hole	PG11/16	M16/20	PG16	M20
3-hole	PG11/16	M16/20	PG16	M20
4-hole	PG11/16	M16/20	—	—
5-hole	—	—	PG16	M32
6-hole	PG16	M25	—	—

Type	Pkg. Quantity	Pendants
		Yellow Plastic (IP66, 4/4X/13)
		Cat. No.
1 hole in face	1	800F-P15
2 holes in face		800F-P25
1 hole in bottom		800F-P35
1 hole in face / 1 hole in bottom		800F-P45

Assembled Stations

Cat. No. 800F-1YP4

1-Hole Yellow Enclosure E-Stop Station

Enclosure Material	Quick Connect		Operator Type	Illumination Voltage	Contact Configuration	Cat. No.
						PG Knockouts	Metric Knockouts
Plastic	N/A		Twist-to-Release 40 mm	Non-Illuminated	1 N.C.	800F-1YP1	800F-1YM1
					1 N.O. / 1 N.C.	800F-1YP2	800F-1YM2
					2 N.C.	800F-1YP3	800F-1YM3
			Key Release 40 mm		1 N.C.	800F-1YP4	800F-1YM4
					1 N.O. / 1 N.C.	800F-1YP5	800F-1YM5
					2 N.C.	800F-1YP6	800F-1YM6
			Twist-to-Release 60 mm		2 N.C.	800F-1YP7	—
					1 N.O. / 2 N.C.	800F-1YP8	—
			Twist-to-Release 40 mm	24V AC/DC	1 N.C.	—	800F-1YML1
				120V AC		—	800F-1YML2
				240V AC		—	800F-1YML3
	AC Micro¬	5-pin		Non-Illuminated	2 N.C. — Low voltage	—	800F-1YMQ53V
		6-pin			1 N.O. / 2 N.C.	—	800F-1YMQA
	DC Micro¬	4-pin		Non‑Illuminated/EMO/Guard	1 N.C.	—	800F-NX1
				Non-Illuminated	1 N.C.	—	800F-1YMQ1
					1 N.O. / 1 N.C.	—	800F-1YMQ2
					2 N.C.	—	800F-1YMQ3
				Non‑Illuminated/EMO/Guard		—	800F-1YMQ3VEG
		5-pin		Non-Illuminated		—	800F-1YMQ3V
	Mini Receptacle¬	4-pin		Non-Illuminated	1 N.C.	—	800F-1YMQ41
				24V AC/DC	1 N.O. / 1 N.C.	—	800F-1YMQ44
		6-pin		24V AC/DC	1 N.O. / 1 N.C.	—	800F-1YMQ4
				120V AC	1 N.O. / 1 N.C.	—	800F-1YMQ5
				240V AC	1 N.O. / 1 N.C.	—	800F-1YMQ6
Metal				24V AC/DC	1 N.O./1 N.C.	—	800F-1MYMQ4
				120V AC	1 N.O./1 N.C.	—	800F-1MYMQ5
				240V AC	1 N.O./1 N.C.	—	800F-1MYMQ6
¬ Please reference Assembled Station Pin Out Chart on Assembled Station Pin Out Chart

1-Hole Grey Enclosure E-Stop Station

Enclosure Material	Quick Connect	Operator Type	Illumination Voltage	Contact Configuration	Cat. No.
					PG Knockouts	Metric Knockouts
Metal	N/A	Twist-to-Release 40 mm	Non-Illuminated	1 N.C.	—	800F-1MM1
				1 N.O. / 1 N.C.	—	800F-1MM2
				2 N.C.	—	800F-1MM3
		Key Release 40 mm		1 N.C.	—	800F-1MM4
				1 N.O. / 1 N.C.	—	800F-1MM5
				2 N.C.	—	800F-1MM6

Grey Enclosure Assembled Stations

Enclosure Material	Quick Connect	Operator Type	Illumination Voltage	Contact Configuration	Cat. No.
					PG Knockouts	Metric Knockouts
1-Hole Plastic	N/A	Black Push Button	Non-Illuminated	1 N.O.	800F-1PP1	800F-1PM1
		“0-1” 2-Position Selector Switch		1 N.O.	800F-1PP2	800F-1PM2
		"OFF-ON" 2-Position Selector Switch		1 N.O. / 1 N.C.	800F-1PP3	800F-1PM3
		↔ (Flush Black)		1 N.O.	800F-1PP4	—
2-Hole Plastic		Start and Stop Push Buttons		1 N.O./1 N.C.	800F-2PP1	—
3-Hole Plastic		↑ (Flush Black) O (Extended Red) ↓ (Flush Black)		4 N.O./1 N.C.	800F-3PP1	—

Assembled Stations with DeviceNet

4-Hole Assembled Station Cat. No. 800F-VHA3A4J3J4J

2-Hole

800F	–
		a	b	c	d	c	d	e
				(Hole 1 c+d)		(Hole 2 c+d)

3-Hole

800F	–
		a	b	c	d	c	d	c	d	e
				(Hole 1 c+d)		(Hole 2 c+d)		(Hole 3 c+d)

4-Hole

800F

–

a

b

c

d

c

d

c

d

c

d

e

(Hole 1 c+d)

(Hole 2 c+d)

(Hole 3 c+d)

(Hole 4 c+d)

a

b

c

d

e

Mounting Orientation

Enclosure Style/Legends

Operator Types

Color/Text

I/O VersionØ

Code

Description

Code

Description

Code

Description

Code

Description

Code

Description

V

Vertical¬

A

2-Hole/Legend Frames

A

Non-Illuminated Flush Button

1

White

Blank

No External I/O

H

Horizontal

B

3-Hole/Legend Frames

B

Non-Illuminated Extended Button

2

Black

A

1 Input/1 Output (Sinking)

C

4-Hole/Legend Frames

C

Non-Illuminated Guarded Button

3

Green

B

1 Input/1 Output (Sourcing)

D

2-Hole/No Legend Frames

D

Illuminated Flush Buttonª

4

Red

C

2 Input

E

3-Hole/No Legend Frames

E

Illuminated Extended Buttonª

5

Yellow

D

2 Output (Sinking)

F

4-Hole/No Legend Frames

F

Illuminated Guarded Buttonª

6

Blue

E

2 Output (Sourcing)

H

2-Hole/E-Stop Only No Legend FramesT

G

Non-Illuminated 2-Pos. Selector Switch

7

Clear

F

1 E-Stop Blockz

H

Non-Illuminated 3-Pos. Selector Switch

8

Gray§

G

2 E-Stop Blockz

J

Pilot Light (Diffused)

9

No Cap

H

2 Input/2 Output

K

Hole Plug

0

Amber

J

2 Input/2 Output (Sinking)

L

Non-Illuminated TTR E-Stop‡

A

Green with "Start" Text

K

2 Input/2 Output (Sourcing)

M

Non-Illuminated Push Pull‡

B

Red with "Stop" Text

L

1 Input/1 Output (Sinking) + 1 E-Stop Blockz

N

2-Pos. Key Selector Switch

C

Black with "→" Symbol

M

1 Input/1 Output (Sourcing) + 1 E-Stop Blockz

P

3-Pos. Key Selector Switch

D

Black with "←" Symbol

N

1 Input/1 Output (Sinking) + 2 E-Stop Blockz

R

Non-Illuminated 40 mm Mushroom

E

Black with "↑" Symbol

P

1 Input/1 Output (Sourcing) + 2 E-Stop Blockz

T

E-Stop Key Release‡

F

Black with "↓" Symbol

Q

2 Input + 1 E-Stop Blockz

U

Potentiometer§

G

Green with "I" Symbol

R

2 Input + 2 E-Stop Blockz

W

Illuminated Push Pull

H

Red with "O" Symbol

T

2 Output (Sinking) + 1 E-Stop Blockz

X

Illuminated 2-Pos. Maintained Selector Switch

L

Blue with "R" Text

U

2 Output (Sourcing) + 1 E-Stop Blockz

Y

Illuminated 3-Pos. Maintained Selector Switch

M

Red with yellow metal guardª

V

2 Output (Sinking) + 2 E-Stop Blockz

Z

Illuminated 40 mm Mushroom

N

Yellow with yellow metal guardª

W

2 Output (Sourcing) + 2 E-Stop Blockz

X

2 Input + 1 Input/1 Output (Sinking)

Y

2 Input + 1 Input/1 Output (Sourcing)

¬ Selector Switches in a vertical mount enclosure are mounted with a horizontal orientation.
T Enclosure Style/Legend option H from Table b can only select one operator from Table c. Valid options are L,M and T. Also see footnote ‡ 
‡ Operator Types L, M, and T from Table c may be used as emergency stops. To be valid as an E-Stop, operators must use color/text option 4 from Table d and it must be placed in the last hole position in the enclosure, where a yellow round E-stop legend plate is provided. An E-Stop connector also must be chosen from Table e. Also see footnote z 
§ Potentiometer allowed in first hole position only.
§ Available in flush only.
Ø This is an 8-in/4-out device. 2-in and 1-out are assigned to each hole position in the enclosure. If a 2-hole enclosure is selected, 4-in and 2-out are assigned internally and up to 4 unassigned I/O points can be assigned to external connectors. This device contains up to two physical external I/O connectors. The "+" symbol in the Description field of table e indicates that two external connectors exist. If an E-Stop connector is used, 2 unassigned I/O points can be assigned to the other connector.
z External I/O Versions F, L, M, Q, T, and U receive only one contact block for the external E-Stop string. These connectors are rated 3 A. If more than 3 A of current is needed or if there are two E-Stop strings, use External I/O Versions G, N, P, R, V and W. These versions receive two contact blocks. This allows for 6 A of switching or for two E-Stop strings.
ª Cannot be ordered with "No Cap" (9 from Table d - Color/Text).
v Operator Types K, L, M, T, and U from Table c are not available with legend frames.
ª Only available with non-illuminated push-pull operator (M from Table c).

Pendant Stations¬ 

Type	Pkg. Quantity	Pendants
		Yellow Plastic (IP66, 4/4X/13)
		Cat. No.
1 hole in face	1	800F-P15
2 holes in face		800F-P25
1 hole in bottom		800F-P35
1 hole in face / 1 hole in bottom		800F-P45

DeviceNet Pendant Station with Mini Quick Disconnect Connector
Options	Cat. No.
Green Flush PB in Face, Red Pilot Light in Bottom; 24V DC	800F-PND2

Pre-Wired Pendant Station with Mini Quick Disconnect Connector
Push Button and Contact Selection	Cat. No.
Green Flush (No Text) in Face with 1 N.O. Contact; Red Pilot Light in Bottom with 1 N.O. Contact; 24V AC/DC	800F-PN2
White Flush (with "Up" Arrow — ↑) with 1 N.O. Contact; Black Flush (with "Down" Arrow — ↓) with 1 N.O. Contact	800F-P251
Black Flush (with "Forward" Text) with 1 N.O. Contact; Black Flush (with "Reverse" Text) with 1 N.O. Contact	800F-P252
Black Flush (with "On" Text) with 1 N.O. Contact; Black Flush (with "Off" Text) with 1 N.C. Contact	800F-P253
Green Flush (with "Start" Text) with 1 N.O. Contact; Red Flush (with "Stop" Text) with 1 N.C. Contact	800F-P254
2 Flush Black Push Buttons (No Text), each with 1 N.O. Contact	800F-P255

¬ Can only use single deep contact block.