Push Buttons

Catalogs > Industrial Controls Catalog > Push Buttons > 30 mm

30 mm

Introduction Standards Compliance and Certifications Specifications Assembled & DeviceNet Stations Trigger Action E-Stops
Momentary Contact Push Buttons Selector Switches Pilot Light Devices Emergency Stop Devices Specialty Devices
Custom-Built Stations & Enclosures Accessories Legend Plates Approximate Dimensions Typical Wiring Diagram(s)
Assembled & DeviceNet Stations

Assembled Stations

Click to enlarge - 800T_800H-1_3-1      Click to enlarge - 800T_800H-1_3-2      Click to enlarge - 800T_800H-1_3-3
Die Cast Aluminum
Cat. No. 800T-2TAR
     Booted Operator – Stainless Steel
Cat. No. 800H-1HA4T
     Booted Operator – Glass Polyester
Cat. No. 800H-1HA4R

Operator Contact Symbol Contact Action Button Type Button Color Legend Marking Type 4/13 Type 4/4X/13
Die Cast
Aluminum
Booted Operator
– Stainless Steel
Booted Operator
– Glass Polyester
Cat. No. Cat. No.⋆  Cat. No.⋆ 
One Push Button Click to enlarge - 800T_800H-1_3-4 1 N.O. - 1 N.C. Momentary Extended Red STOP 800T-1TA 800H-1HA4T 800H-1HA4R
Momentary Flush Green START 800T-1TB 800H-1HB4T 800H-1HB4R
Momentary Flush Black No Legend 800T-1TX 800H-1HX4T 800H-1HX4R
Two Push Buttons Click to enlarge - 800T_800H-1_3-4 1 N.O. - 1 N.C.
Each Button
Momentary Flush
Extended
Green
Red
START
STOP
800T-2TA 800H-2HA4T 800H-2HA4R
Momentary Flush
Flush
Black
Black
No Legend 800T-2TX 800H-2HX4T 800H-2HX4R
One Pilot Light, Two Push Buttons Click to enlarge - 800T_800H-1_3-6 1 N.O. - 1 N.C.
Each Button
Momentary 120V AC
Flush
Extended
Red
Green
Red
No Legend
START
STOP
800T-2TAR 800H-2HAR4T 800H-2HAR4R
Click to enlarge - 800T_800H-1_3-4 Momentary 120V AC
Flush
Flush
Red
Black
Black
No Legend 800T-2TXR 800H-2HXR4T 800H-2HXR4R
3-Position Selector Switch Click to enlarge - 800T_800H-1_3-8 1 N.O. - 1 N.C. Maintained Knob Lever Black with white insert HAND-OFF-AUTO 800T-R3TA
Maintained Knob Lever Black with white insert No Legend 800T-R3TX
One Push Button Click to enlarge - 800T_800H-1_3-9 1 N.C.L.B. Maintained Push-Pull/Twist Red EMERG STOP 800T-1TYM‡ 
Two Push Buttons Click to enlarge - 800T_800H-1_3-10 1 N.O. - 1 N.C. Maintained Flush
Extended
Green
Red
START
STOP
800T-2TAM 800H-2HAM4T 800H-2HAM4R
Maintained Flush
Flush
Black
Black
No Legend 800T-2TXM 800H-2HXM4T 800H-2HXM4R
  
⋆ Boot material is chlorosulfonated polyethylene. Add suffix L to the cat. no. for station with bootless operators. Example: Cat. No. 800H-1HB4T becomes Cat. No. 800H-1HB4TL.
‡ Supplied with yellow legend plate to comply with IEC 60947-5-5 and NFPA79 E-Stop standards that require yellow background.

DeviceNet Stations

Click to enlarge - 800t_dlpb


Two-Unit    800T                                   
            a    b    c    d    c    d    e   
                        (Hole One c + d)    (Hole Two c + d)                              
Three-Unit    800T                                             
            a    b    c    d    c    d    c    d    e   
                        (Hole One c + d)    (Hole Two c + d)    (Hole Three c + d)                  
Four-Unit    800T                                                    
            a    b    c    d    c    d    c    d    c    d    e
                        (Hole One c + d)    (Hole Two c + d)    (Hole Three c + d)    (Hole Four c + d)      

a    b    c    d    e
Orientation Enclosure Style Operator Types Color/Text External I/O Version♦ 
Code Description Code Description Yellow Code Code Description Code Description Code Description
V Vertical A 2-hole K A Non-illuminated flush (800T-A*) 1 Green Blank No external I/O
H Horizontal B 3-hole L B Non-illuminated extended (800T-B*) 2 Black (non-illuminated only) A 1 input/1 output (sinking)
  C 4-hole M C Non-illuminated mushroom (800T-D*) 3 Orange (non-illuminated only) B 1 input/1 output (sourcing)
G E-stop only♣  N D Illuminated mushroom (800T-QM*) 4 Grey (non-illuminated only) C 2 input
  E Illuminated extended (800T-QB*) 5 White E 2 output (sourcing)
F Illuminated guarded (800T-QA*) 6 Red F 1 E-stop block∆ 
G 2-position SS maintained (800T-H2*) 7 Blue G 2 E-stop blocks∆ 
H 3-position SS maintained (800T-J2*) 8 Clear (illuminated only) H 2 input + 2 input
J Enhanced pilot light (800T-QH*) 9 Yellow (non-illuminated)/amber (illuminated) K 2 input + 2 output (sourcing)
K Non-illuminated 2-position push/pull (800T-FX*)§  A Green with Start legend L 1 input/1 output (sinking) + 1 E-stop block∆ 
L Non-illuminated push/pull twist-to-release (800T-FXT*)§  B Red with Stop legend M 1 input/1 output (sourcing) + 1 E-stop block∆ 
M Illuminated 2-position push/pull (800T-FXQH*) C Red with E-Stop legend N 1 input/1 output (sinking) + 2 E-stop blocks∆ 
N 2-position key SS (800T-H33*)‡  D Black with Off/On legend P 1 input/1 output (sourcing) + 2 E-stop blocks∆ 
P 3-position key SS (800T-J44*)‡  E Black with Hand/Off/Auto legend Q 2 input + 1 E-stop block∆ 
Q 2-position SS spring return from right (800T-H5*) F Red with Push to Stop/Pull to Start legend R 2 input + 2 E-stop blocks∆ 
R 3-position SS spring return from all (800T-J91*) G Blue with Reset legend U 2 output (sourcing) + 1 E-stop block∆ 
T Illuminated 2-position SS maintained (800T-24H*H*) H Red with Power On legend W 2 output (sourcing) + 2 E-stop blocks∆ 
U Illuminated 3-position SS maintained (800T-24J*H*) X N/A (i.e. key ss) X 2 input + 1 input/1 output (sinking)
V Non-illuminated 3-position push/pull (800T-FXM*)    
W Potentiometer♠ 

‡ Operator Types N and P from Table c must choose Color/Text option X from Table d.
§ Operator Types K and L from Table c may be used as Emergency Stops. To be valid as an E-Stop, the operators must use Color/Text option C from Table d and it must be placed in the last hole position in the enclosure. An E-Stop connector also must be chosen from Table e.
♣ Enclosure Style option G from Table b can only select one operator from Table c. Valid options are K and L with E-Stop.
∆ External I/O Versions F, L, M, Q, and U receive only one contact block for the external E-Stop string. These connectors are rated to 3 A. If more than 3 A of current is needed or if there are two E-Stop strings, use External I/O Versions G, N, P, R, and W. These versions receive two contact blocks. This allows for 6 A of switching or for two E-Stop strings.
♦ This is an 8-in/4-out device. 2-in/1-out is assigned to each hole position in the enclosure. If a 2-hole enclosure is selected, 4-in and 2-out are assigned internally and up to 4 unassigned I/O points can be assigned to external connectors. This device contains up to two physical external I/O connectors. The “+” symbol in the Description field of Table e indicates that two external connectors exist. If an E-Stop connector is used, 2 unassigned I/O points can be assigned to the other connector.
♠ Available for certain applications, please contact your local Allen-Bradley distributor.


DeviceNet is a trademark of the Open DeviceNet Vendor Association (ODVA). DeviceLogix is a trademark of Rockwell Automation.