Push Buttons

Catalogs > Industrial Controls Catalog > Push Buttons > 30 mm

30 mm

Introduction Standards Compliance and Certifications Specifications Assembled & DeviceNet Stations Trigger Action E-Stops
Momentary Contact Push Buttons Selector Switches Pilot Light Devices Emergency Stop Devices Specialty Devices
Custom-Built Stations & Enclosures Accessories Legend Plates Approximate Dimensions Typical Wiring Diagram(s)
Selector Switches

2-Position Selector Switch Devices, Non-Illuminated

Click to enlarge - 800T_800H-1_9-1      Click to enlarge - 800T_800H-1_9-2      Click to enlarge - 800T_800H-1_9-3
Standard Knob Operator
Cat. No. 800T-H2A
     Knob Lever Operator
Cat. No. 800T-H17A
     Standard Knob Operator
Cat. No. 800H-HR2A

Contact Type Side Contact Operator Position M = Maintained
S = Spring Return
Type 4/13 Type 4/4X/13
Standard Knob Knob Lever Standard Knob
Click to enlarge - 800T_800H-1_9-4 Click to enlarge - 800T_800H-1_9-5 Cat. No. Cat. No. Cat. No.
No Contacts M M 800T-H2 800T-H17 800H-HR2
S→M 800T-H4 800T-H18 800H-HR4
M←S 800T-H5 800T-H19 800H-HR5
Click to enlarge - 800T_800H-1_6-5 1 N.O. White A O X M M 800T-H2D1 800T-H17D1 800H-HR2D1
S→M⋆  800T-H4D1 800T-H18D1 800H-HR4D1
M←S 800T-H5D1 800T-H19D1 800H-HR5D1
Click to enlarge - 800T_800H-1_3-4 1 N.O. - 1 N.C. White A
B
O
X
X
O
M M 800T-H2A 800T-H17A 800H-HR2A
S→M⋆  800T-H4A 800T-H18A 800H-HR4A
M←S 800T-H5A 800T-H19A 800H-HR5A
  
Note: X = Closed/O = Open
⋆ Target tables are reversed from those shown.

800 T       HA    2    A
   a    b    c    d    e

Click to enlarge - 800T_800H-1_9-8


a    b    c
Protection Rating Finger-Safe Guards Knob Insert Colors
800T
Type 4/13
Description 800H
Type 4/4X/13
Code Description Code Description Code Code
T Metal, Type 4/13 Blank No guards H White HR
H Plastic, Type 4/4X/13 C Guards on terminals HX Packet of colored inserts‡  HRX
    Metal Wing Lever Colors♣ 
Code Color Code
HA Red
HG Grey

d    e    e (cont'd)
Operator Type and Function Contact Block(s) Contact Block(s)
Standard Knob Code Description Code Description
Code Operator Function Contact Configuration 2-Position Contact Configuration
2 Maintained Click to enlarge - 800T_800H-1_9-4 Click to enlarge - 800T_800H-1_9-5 Class1, Div. 2
4 Spring return from left§  Blank No contacts Logic Reed∆ 
5 Spring return from right Standard D1R 1 N.O.
Knob Lever♣  D1 1 N.O. O X D2R 1 N.C.
17 Maintained D2 1 N.C. X O AR 1 N.O. - 1 N.C.
18 Spring return from left§  A 1 N.O. - 1 N.C. O X BR 2 N.O. - 2 N.C.
19 Spring return from right X O Sealed Switch∆ 
Metal Wing Lever♣  B 2 N.O. - 2 N.C. O X D1P 1 N.O.
11 Maintained X O D2P 1 N.C.
15 Spring return from left§  O X AP 1 N.O. - 1 N.C.
16 Spring return from right X O BP 2 N.O. - 2 N.C.
Coin Slot♣  Max Duty (Horsepower Rated)∆  Stackable Sealed Switch∆ 
6 Maintained D1M 1 N.O. D1Y 1 N.O.
7 Spring return from left D2M 1 N.C. D2Y 1 N.C.
8 Spring return from right PenTUFF (Low Voltage)∆  AY 1 N.O. - 1 N.C.
  D1V 1 N.O. BY 2 N.O. - 2 N.C.
D2V 1 N.C.  
AV 1 N.O. - 1 N.C.
BV 2 N.O. - 2 N.C.

‡ One insert of each color (blue, green, orange, red, and yellow).
§ Target tables are reversed from those shown.
♣ Only available on Bul. 800T, Type 4/13 operators.
∆ Contact target tables same as those listed for standard contact blocks.


2-Position Selector Switch Devices, Non-Illuminated (Bul. 800T only)

Click to enlarge - 800T_800H-1_10-1
2-Position Cylinder Lock Operator
Cat. No. 800T-H33A


Contact Type Side Contact Operator Position M = Maintained
S = Spring Return
Type 4/13
Cylinder Lock∆ 
Key Removal — Left‡  Key Removal — Right‡  Key Removal — Both‡ 
Click to enlarge - 800T_800H-1_9-4 Click to enlarge - 800T_800H-1_9-5 Cat. No. Cat. No. Cat. No.
No Contacts M M 800T-H31 800T-H32 800T-H33
M←S 800T-H48
Click to enlarge - 800T_800H-1_6-5 1 N.O. White A O X M M 800T-H31D1 800T-H32D1 800T-H33D1
S→M⋆  800T-H42D1
M←S 800T-H48D1
Click to enlarge - 800T_800H-1_3-4 1 N.O. - 1 N.C. White A
B
O
X
X
O
M M 800T-H31A 800T-H32A 800T-H33A
S→M⋆  800T-H42A
M←S 800T-H48A
  
Note: X = Closed/O = Open
⋆ Target tables are reversed from those shown.
‡ Keys removable from maintained positions only.

800 T       H31          A
   a    b    c    d    e

Click to enlarge - 800T_800H-1_9-8


a    b    c
Protection Rating Finger-Safe Guards Key Removal Position
Maintained
Code Description Code Description Code Operator Function
T Metal, Type 4/13 Blank No guards H31 Key removal — left
  C Guards on terminals H32 Key removal — right
  H33 Key removal — both
Spring Return From Left
Code Operator Function
H42 Key removal — right⋆ 
Spring Return From Right
Code Operator Function
H48 Key removal — left

d    e    e (cont'd)
Key Options
for Cylinder Locks∆ 
Key Options
for Cylinder Locks
Contact Block(s) Contact Block(s)
Code T Series
Key No.
Code T Series
Key No.
Code Description Code Description
Contact Configuration 2-Position
Click to enlarge - 800T_800H-1_9-4 Click to enlarge - 800T_800H-1_9-5
Blank D018 (Std. Key) 15 T112 Blank No contacts PenTUFF (Low Voltage)
03 D020 16 T115 Standard D1V 1 N.O.
04 D025 17 T324 D1 1 N.O. O X D2V 1 N.C.
05 D335 18 T382 D2 1 N.C. X O AV 1 N.O. - 1 N.C.
06 D429 19 T404 A 1 N.O. - 1 N.C. O X BV 2 N.O. - 2 N.C.
07 D461 20 T171 X O Class 1, Div. 2
08 D111 21 T484 B 2 N.O. - 2 N.C. O X Logic Reed♣ 
09 D587 22 T547 X O D1R 1 N.O.
10 D682 23 T569 O X D2R 1 N.C.
11 D713 24 T692 X O AR 1 N.O. - 1 N.C.
12 D900 25 T752 Max Duty (Horsepower Rated) BR 2 N.O. - 2 N.C.
13 D992 26 T178 D1M 1 N.O. Sealed Switch♣ 
14 D118 D2M 1 N.C. D1P 1 N.O.
    D2P 1 N.C.
AP 1 N.O. - 1 N.C.
BP 2 N.O. - 2 N.C.
Stackable Sealed Switch♣ 
D1Y 1 N.O.
D2Y 1 N.C.
AY 1 N.O. - 1 N.C.
BY 2 N.O. - 2 N.C.

⋆ Target tables are reversed from those shown.
‡ Keys removable from maintained positions only.
♣ Contact target tables same as those listed for standard and PenTUFF contact blocks.
∆ Device supplied with 2 keys. Replacement key part no. for standard D018 key is X-181170. See Replacement Keys for Cylinder Lock 2-, 3-, and 4-Position Selector Switches (800T only) for additional replacement key numbers.


3-Position Selector Switch Devices, Non-Illuminated

Click to enlarge - 800T_800H-1_11-1      Click to enlarge - 800T_800H-1_11-2      Click to enlarge - 800T_800H-1_11-3
Standard Knob Operator
Cat. No. 800T-J2A
     Knob Lever Operator
Cat. No. 800T-J17A
     Standard Knob Operator
Cat. No. 800H-JR2A

Contact Type Operator Position M = Maintained
S = Spring Return
Type 4/13 Type 4/4X/13
Standard Knob Knob Lever Standard Knob
Click to enlarge - 800T_800H-1_9-4 Click to enlarge - 800T_800H-1_11-5 Click to enlarge - 800T_800H-1_9-5 Cat. No. Cat. No. Cat. No.
No Contacts M M M 800T-J2 800T-J17 800H-JR2
S→M M 800T-J4 800T-J18 800H-JR4
M M←S 800T-J5 800T-J19 800H-JR5
S→M←S 800T-J91 800T-J20 800H-JR91
Click to enlarge - 800T_800H-1_3-4 O
X
O
O
X
O
M M M 800T-J2A 800T-J17A 800H-JR2A
S→M M 800T-J4A 800T-J18A 800H-JR4A
M M←S 800T-J5A 800T-J19A 800H-JR5A
1 N.O. - 1 N.C. S→M←S 800T-J91A 800T-J20A 800H-JR91A
  
Note: X = Closed/O = Open

800 T       J    2          C
   a    b    c    d    e    f

Click to enlarge - 800T_800H-1_11-7


a    b    c
Protection Rating Finger-Safe Guards Knob Insert Colors
800T
Type 4/13
Description 800H
Type 4/4X/13
Code Description Code Description Code Code
T Metal, Type 4/13 Blank No guards J White JR
H Plastic, Type 4/4X/13 C Guards on terminals JX Packet of colored inserts⋆  JRX
    Metal Wing Lever Colors‡ 
Code Color Code
JA Red
JG Grey

d
Knob/Lever Type Operators
Standard Knob
Code Operator Function
2 Maintained
4 Spring return from left
5 Spring return from right
91 Spring return from both
Knob Lever‡ 
Code Operator Function
17 Maintained
18 Spring return from left
19 Spring return from right
20 Spring return from both
Metal Wing Lever‡ 
Code Operator Function
11 Maintained
15 Spring return from left
16 Spring return from right
141 Spring return from both
Coin Slot‡ 
Code Operator Function
10 Spring return from both

e    e (cont'd)
Cam Option§  Cam Option§ 
Code Description Code Description
Blank KB7 cam (std.) KQ1 KQ1 cam
KA1 KA1 cam KQ7 KQ7 cam
KA7 KA7 cam KR1♣  KR1 cam
KC1 KC1 cam KR7♣  KR7 cam
KC7 KC7 cam KT1♣  KT1 cam
KD7 KD7 cam KT7♣  KT7 cam
KE7♣  KE7 cam KU7♣  KU7 cam
Note:See Table 1 for cam selections.

f    f (cont'd)
Contact Blocks Contact Blocks
Code Description Code Description
Blank No contacts on operator Blank No contacts
Standard Class 1, Div. 2
A 1 N.O. - 1 N.C.
1-800T-XA on white side
Logic Reed
B 2 N.O. - 2 N.C.
2-800T-XAs —
1 on white side/1 on black side
AR 1 N.O. - 1 N.C.
1-800T-XAR on white side
PenTUFF (Low Voltage) BR 2 N.O. - 2 N.C.
2-800T-XARs —
1 on white side/1 on black side
AV 1 N.O. - 1 N.C.
1-800T-XAV on white side
Sealed Switch
BV 2 N.O. - 2 N.C.
2-800T-XAVs —
1 on white side/1 on black side
AP 1 N.O. - 1 N.C.
1-800T-XAP on white side
  BP 2 N.O. - 2 N.C.
2-800T-XAPs —
1 on white side/1 on black side
Stackable Sealed Switch
AY 1 N.O. - 1 N.C.
1-800T-XAY on white side
BY 2 N.O. - 2 N.C.
2-800T-XAYs —
1 on white side/1 on black side
Note:Associated targets shown in Table 1.

⋆ One insert of each color (blue, green, orange, red, and yellow).
‡ Only available on Bul. 800T, Type 4/13 operators.
§ If an overlapping cam is required, consult your local distributor.
♣ Not available with wing levers.
∆ See Table 1 for cam selections and associated targets.


Table 1. Cam and Contact Block Functionality Table

Contact Block
Suffix Code
Circuits Cam Codes
KB7
(Std.)
KA1 KA7 KC1 KC7 KD7 KE7 KQ1 KQ7 KR1 KR7 KT1 KT7 KU7
Click to enlarge - 800T_800H-1_11-8 Click to enlarge - 800T_800H-1_11-9 Click to enlarge - 800T_800H-1_11-10 Click to enlarge - 800T_800H-1_11-11 A X O O X O O O O X O O X X O O O O X X O O X O X X O X X O X X O X O O X X O O X O O
B O O X O X O O X O O X O O X O O X O O X X O X O O X O O X O O X O X O O O O X O X O
  A X O O X O O O O X O O X X O O X O O O O X O O X X O O O O X X O O O O X X O O O O X
B O O X O X O O X O X O O O O X O X O X X O O X O O X O X X O O X X X X O O X X X X O
  A X O O X O O O O X O O X X O O O O X X O O X O X X O X X O X X O X O O X X O O X O O
B O O X O X O O X O O X O O X O O X O O X X O X O O X O O X O O X O X O O O O X O X O
  A X O O X O O O O X O O X X O O X O O O O X O O X X O O O O X X O O O O X X O O O O X
B O O X O X O O X O X O O O O X O X O X X O O X O O X O X X O O X X X X O O X X X X O

Note:X = Closed/O = Open

3-Position Selector Switch Devices, Non-Illuminated (Bul. 800T only)

Click to enlarge - 800T_800H-1_12-1
3-Position Cylinder Lock Operator
Cat. No. 800T-J41A


Contact Type Operator Position M = Maintained
S = Spring Return
Type 4/13
Click to enlarge - 800T_800H-1_9-4 Click to enlarge - 800T_800H-1_11-5 Click to enlarge - 800T_800H-1_9-5 Cylinder Lock♣ 
Key Removal — Left ⋆  Key Removal — Center ⋆  Key Removal — All ⋆ 
Cat. No. Cat. No. Cat. No.
No Contacts M M M 800T-J41 800T-J42 800T-J44
S→M M 800T-J50
M M←S 800T-J69 800T-J38
S→M←S 800T-J631
Click to enlarge - 800T_800H-1_3-4 O
X
O
O
X
O
M M M 800T-J41A 800T-J42A 800T-J44A
S→M M 800T-J50A
M M←S 800T-J69A 800T-J38A
1 N.O. - 1 N.C. S→M←S 800T-J631A
  
Note: X = Closed/O = Open
⋆ Key removable in maintained positions only.

800 T       J41          KC1    A
   a    b    c    d    e    f

Click to enlarge - 800T_800H-1_11-7


a    b    c
Protection Rating Finger-Safe Guards Key Removal Position
Maintained
Code Description Code Description Code Operator Function
T Metal, Type 4/13 Blank No guards J41 Key removal — left
  C Guards on terminals J42 Key removal — center
  J43 Key removal — right
J44 Key removal — all
J45 Key removal — left and center
J46 Key removal — right and left
J47 Key removal — right and center
Spring Return from Left
J50 Key removal — center
J52 Key removal — right
J51 Key removal — right and center
Spring Return from Right
J69 Key removal — left
J38 Key removal — center
J73 Key removal — left and center
Spring Return from Both
J631 Key removal — center

d    e    e (cont’d)
Key Options for Cylinder Locks♣  Cam Option‡  Cam Option‡ 
Code Key No. Code Description Code Description
Blank D018 (standard key) Blank KB7 cam (std.) KQ1 KQ1 cam
03 D020 KA1 KA1 cam KQ7 KQ7 cam
04 D025 KA7 KA7 cam KR1 KR1 cam
05 D335 KC1 KC1 cam KR7 KR7 cam
06 D429 KC7 KC7 cam KT1 KT1 cam
Note: Refer to 2-Position Selector Switch Devices, Non-Illuminated (Bul. 800T only)
for additional key option codes.
KD7 KD7 cam KT7 KT7 cam
KE7 KE7 cam KU7 KU7 cam
Note: See Table 1 for cam selections.

f    f (cont'd)
Contact Blocks Contact Blocks
Code Description Class 1, Div. 2
Blank No contacts Logic Reed
Standard Code Description
A 1 N.O. - 1 N.C.
1-800T-XA on white side
AR 1 N.O. - 1 N.C.
1-800T-XAR on white side
B 2 N.O. - 2 N.C.
2-800T-XAs — 1 on white side/1 on black side
BR 2 N.O. - 2 N.C.
2-800T-XARs —
1 on white side/1 on black side
PenTUFF (Low Voltage) Sealed Switch
AV 1 N.O. - 1 N.C.
1-800T-XAV on white side
AP 1 N.O. - 1 N.C.
1-800T-XAP on white side
BV 2 N.O. - 2 N.C.
2-800T-XAVs — 1 on white side/1 on black side
BP 2 N.O. - 2 N.C.
2-800T-XAPs —
1 on white side/1 on black side
  Stackable Sealed Switch
AY 1 N.O. - 1 N.C.
1-800T-XAY on white side
BY 2 N.O. - 2 N.C.
2-800T-XAYs —
1 on white side/1 on black side

⋆ Key removable in maintained positions only.
‡ If an overlapping cam is required, consult your local Rockwell Automation sales office or Allen-Bradley distributor.
♣ Device supplied with 2 keys. Replacement key part no. for standard D018 key is X-181170. See Replacement Keys for Cylinder Lock 2-, 3-, and 4-Position Selector Switches (800T only) for additional replacement key numbers.


Table 1. Cam and Contact Block Functionality Table

Contact Block
Suffix Code
Ckts Cam Codes
KB7
(Std.)
KA1 KA7 KC1 KC7 KD7 KE7 KQ1 KQ7 KR1 KR7 KT1 KT7 KU7
Click to enlarge - 800T_800H-1_11-8 Click to enlarge - 800T_800H-1_11-9 Click to enlarge - 800T_800H-1_11-10 Click to enlarge - 800T_800H-1_11-11 A X O O X O O O O X O O X X O O O O X X O O X O X X O X X O X X O X O O X X O O X O O
B O O X O X O O X O O X O O X O O X O O X X O X O O X O O X O O X O X O O O O X O X O
  A X O O X O O O O X O O X X O O X O O O O X O O X X O O O O X X O O O O X X O O O O X
B O O X O X O O X O X O O O O X O X O X X O O X O O X O X X O O X X X X O O X X X X O
  A X O O X O O O O X O O X X O O O O X X O O X O X X O X X O X X O X O O X X O O X O O
B O O X O X O O X O O X O O X O O X O O X X O X O O X O O X O O X O X O O O O X O X O
  A X O O X O O O O X O O X X O O X O O O O X O O X X O O O O X X O O O O X X O O O O X
B O O X O X O O X O X O O O O X O X O X X O O X O O X O X X O O X X X X O O X X X X O

4-Position Selector Switch Devices, Non-Illuminated

Click to enlarge - 800T_800H-1_13-1      Click to enlarge - 800T_800H-1_13-2      Click to enlarge - 800T_800H-1_13-3
Standard Knob Operator
Cat. No. 800T-N2KN4B
     Knob Lever Operator
Cat. No. 800T-N17KN4B
     Standard Knob Operator
Cat. No. 800H-NR2KF4AAXX

Contact Type Operator Position M = Maintained
S = Spring Return
Type 4/13 Type 4/4X/13
Click to enlarge - 800T_800H-1_13-4 Click to enlarge - 800T_800H-1_13-5 Click to enlarge - 800T_800H-1_13-6 Click to enlarge - 800T_800H-1_13-7 Standard Knob Knob Lever Standard Knob
Cat. No. Cat. No. Cat. No.
No Contacts M M M M 800T-N2KF4 800T-N17KF4 800H-NR2KF4
S→M M M 800T-N3KF4 800T-N29KF4 800H-NR3KF4
M M M←S 800T-N9KF4 800T-N30KF4 800H-NR9KF4
Click to enlarge - 800T_800H-1_3-4 X
O
O
O
O
X
O
O
O
O
X
O
O
O
O
X
M M M M 800T-N2KF4B 800T-N17KF4B 800H-NR2KF4AAXX
Click to enlarge - 800T_800H-1_3-4 S→M M M 800T-N3KF4B 800T-N29KF4B 800H-NR3KF4AAXX
2 N.O. - 2 N.C. M M M←S 800T-N9KF4B 800T-N30KF4B 800H-NR9KF4AAXX
  
Note: X = Closed/O = Open

800 T       N    2    KF4    B
   a    b    c    d    e    f

Click to enlarge - 800T_800H-1_11-7


a    b    c
Protection Rating Finger-Safe Guards Knob Insert Colors
800T
Type 4/13
Description 800H
Type 4/4X/13
Code Description Code Description Code Code
T Metal, Type 4/13 Blank No guards N White NR
H Plastic, Type 4/4X/13 C Guards on terminals NX Packet of colored inserts⋆  NRX
    Metal Wing Lever Colors
Code Color Code
NA Red
NG Grey

d    e
Operator Function and Knob Type Cam Option∆ 
Standard Knob
Code Operator Function Code Description
2 Maintained KF4 F cam
3 Spring return from position 1 to position 2 KG4 G cam
9 Spring return from position 4 to position 3 KK4♦  K cam
Knob Lever♣  KM4♦  M cam
Code Operator Function KP4 P cam
17 Maintained KN4 Overlapping cam‡ 
29 Spring return from position 1 to position 2  
30 Spring return from position 4 to position 3
Metal Wing Lever♣ 
Code Operator Function
11 Maintained
13 Spring return from position 1 to position 2
14 Spring return from position 4 to position 3

f    f (cont'd)
Contact Blocks∆  Contact Blocks
800T
Type 4/13
Description 800H
Type 4/4X/13
800T
Type 4/13
Description 800H
Type 4/4X/13
Code Code Code Code
PenTUFF (Low Voltage)
Blank No contacts Blank BV 2 N.O. - 2 N.C. FFXX
Standard HV 3 N.O. - 3 N.C. FFFX
B 2 N.O. - 2 N.C. 2-800T-XAs —
1 on white side/1 on black side
AAXX CV 4 N.O. - 4 N.C. FFFF
H 3 N.O. - 3 N.C. 3-800T-XAs —
2 on white side/1 on black side
AAAX Class 1, Div. 2
C 4 N.O. - 4 N.C. 4-800T-XAs —
2 on white side/2 on black side
AAAA Logic Reed§ 
  BR 2 N.O. - 2 N.C. TTXX
HR 3 N.O. - 3 N.C. TTTX
CR 4 N.O. - 4 N.C. TTTT
Sealed Switch§ 
BP 2 N.O. - 2 N.C. PPXX
Stackable Sealed Switch♣ 
BY∆  2 N.O. - 2 N.C. TTXX
HY∆  3 N.O. - 3 N.C. TTTX
CY∆  4 N.O. - 4 N.C. TTTT

⋆ One insert of each color (blue, green, orange, red, and yellow).
‡ Overlapping cam. See Publication 800T-2.8 for overlap specifications.
§ Contact block mounting same as listed for standard and PenTUFF contact blocks.
♣ Only available on Bul. 800T, Type 4/13 operators.
∆ See Table 1 for proper cam/contact selection.
♦ Not available with wing levers.


Table 1. Cam and Contact Block Functionality Table

Contact Block
Suffix Code
Contact
Block
Side
Circuits Cam Codes
KF4 KG4 KK4 KM4 KP4 KN4‡ 
Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14 Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14 Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14 Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14 Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14 Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14
Click to enlarge - 800T_800H-1_11-8 Click to enlarge - 800T_800H-1_11-9 Click to enlarge - 800T_800H-1_11-10 White A X O O O X X O O O O X X X O O O O O O X O X O O
B O X O O O O X O X X O O O X X O O X O O O O O X
Black A O O O X X O O O X O O X O O O X O O X X O O X O
B O O X O O O O X O X X O O X O O X O O O X O O O
  White A X O O O X X O O O O X X X O O O O O O X O X O O
B O X O O O O X O X X O O O X X O O X O O O O O X
  Black A O O O X X O O O X O O X O O O X O O X X O O X O
B O O X O O O O X O X X O O X O O X O O O X O O O

Note:X = Closed/O = Open

4-Position Selector Switch Devices, Non-Illuminated (800T only)

Click to enlarge - 800T_800H-1_14-1
Cylinder Lock Operator
Cat. No. 800T-N32KF4B


Contact Type Operator Position M = Maintained
S = Spring Return
Cylinder Lock – Type 4/13♣ 
Click to enlarge - 800T_800H-1_13-4 Click to enlarge - 800T_800H-1_13-5 Click to enlarge - 800T_800H-1_13-6 Click to enlarge - 800T_800H-1_13-7 Key Removal — Position 2⋆  Key Removal — Position 3⋆  Key Removal — All⋆ 
Cat. No. Cat. No. Cat. No.
No Contacts M M M M 800T-N32KF4 800T-N33KF4 800T-N61KF4
S→M M M 800T-N132KF4 800T-N133KF4
M M M←S 800T-N232KF4 800T-N233KF4
Click to enlarge - 800T_800H-1_3-4 X
O
O
O
O
X
O
O
O
O
X
O
O
O
O
X
M M M M 800T-N32KF4B 800T-N33KF4B 800T-N61KF4B
Click to enlarge - 800T_800H-1_3-4 S→M M M 800T-N132KF4B 800T-N133KF4B
2 N.O. - 2 N.C. M M M←S 800T-N232KF4B 800T-N233KF4B
  
Note: X = Closed/O = Open
⋆ Key removable in maintained positions only.

800 T       N31          KM4    C
   a    b    c    d    e    f

Click to enlarge - 800T_800H-1_11-7


a    b    c    c (cont'd)
Protection Rating Finger-Safe Guards Key Removal Position and Operator Function Key Removal Position and Operator Function
Maintained Spring Return From Position 1 to Position 2
Code Description Code Description Code Operator Function Code Description
T Metal, Type 4/13 Blank No guards N31 Key removal position 1 N132 Key removal position 2
  C Guards on terminals N32 Key removal position 2 N133 Key removal position 3
  N33 Key removal position 3 N134 Key removal position 4
N34 Key removal position 4 N154 Key removal positions 2, 3, and 4
N61 Key removal all positions Spring Return From
Position 4 to Position 3
  Code Operator Function
N231 Key removal position 1
N232 Key removal position 2
N233 Key removal position 3
N251 Key removal positions 1, 2, and 3

d    e
Key Options for Cylinder Locks♣  Cam Option
D Series
Code Key No. Code Description
Blank D018 (standard key) KF4 F cam
03 D020 KG4 G cam
04 D025 KK4 K cam
05 D335 KM4 M cam
06 D429 KP4 P cam
Note: Refer to 2-Position Selector Switch Devices, Non-Illuminated (Bul. 800T only) for additional key option codes. KN4 Overlapping cam‡ 
Note: See Table 1 for proper cam selection.

f    f (cont'd)
Contact Blocks Contact Blocks
Code Description Code Description
Blank No contacts Sealed Switch§ 
Standard BP 2 N.O. - 2 N.C.
B 2 N.O. - 2 N.C.
2-800T-XAs —
1 on white side/1 on black side
Stackable Sealed Switch§ 
H 3 N.O. - 3 N.C.
3-800T-XAs —
2 on white side/1 on black side
BY 2 N.O. - 2 N.C.
C 4 N.O. - 4 N.C.
4-800T-XAs —
2 on white side/2 on black side
HY 3 N.O. - 3 N.C.
PenTUFF (Low Voltage) CY 4 N.O. - 4 N.C.
BV 2 N.O. - 2 N.C.
2-800T-XAVs —
1 on white side/1 on black side
 
HV 3 N.O. - 3 N.C.
3-800T-XAVs —
2 on white side/1 on black side
CV 4 N.O. - 4 N.C.
4-800T-XAVs —
2 on white side/2 on black side
Class 1, Div. 2
Logic Reed§ 
BR 2 N.O. - 2 N.C.
HR 3 N.O. - 3 N.C.
CR 4 N.O. - 4 N.C.
Note: Associated targets shown in Table 1.

Table 1. Cam and Contact Block Functionality Table

Contact Block
Suffix Code
Contact
Block
Side
Circuits Cam Codes
KF4 KG4 KK4 KM4 KP4 KN4‡ 
Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14 Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14 Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14 Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14 Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14 Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14
Click to enlarge - 800T_800H-1_11-8 Click to enlarge - 800T_800H-1_11-9 Click to enlarge - 800T_800H-1_11-10 White A X O O O X X O O O O X X X O O O O O O X O X O O
B O X O O O O X O X X O O O X X O O X O O O O O X
Black A O O O X X O O O X O O X O O O X O O X X O O X O
B O O X O O O O X O X X O O X O O X O O O X O O O
  White A X O O O X X O O O O X X X O O O O O O X O X O O
B O X O O O O X O X X O O O X X O O X O O O O O X
  Black A O O O X X O O O X O O X O O O X O O X X O O X O
B O O X O O O O X O X X O O X O O X O O O X O O O

Note: X = Closed/O = Open
⋆ Key removable in maintained positions only.
‡ Overlapping cam. One layer of contact blocks allowed, no stacking. See Publication 800T-2.8 for overlap specifications.
§ Contact block mounting same as listed for standard and PenTUFF contact blocks.
♣ Device supplied with 2 keys. Replacement key part no. for standard D018 key is X-181170. See Replacement Keys for Cylinder Lock 2-, 3-, and 4-Position Selector Switches (800T only) for additional replacement key numbers.


2-Position Knob/Lever Type Selector Switch Devices, Illuminated

Click to enlarge - 800T_800H-1_15-1      Click to enlarge - 800T_800H-1_15-2
Standard Knob Operator
Cat. No. 800T-16HR2KB6AX
     Knob Lever Operator
Cat. No. 800H-16HRR17KB6AX

Type Lamp Type Volts Knob Color Operator Position M = Maintained
S = Spring Return
Type 4/13 Type 4/4X/13
Standard Knob Standard Knob
Click to enlarge - 800T_800H-1_9-4 Click to enlarge - 800T_800H-1_9-5 Cat. No. Cat. No.
Operator Only⋆  No Contacts M M 800T-00HX2KB6 800H-00HRX2KB6
Full Voltage Incandescent 24V AC/DC Red X
O
O
X
M M 800T-24HR2KB6AX 800H-24HRR2KB6AX
S→M‡  800T-24HR4KL8AX 800H-24HRR4KL8AX
M←S 800T-24HR5KL8AX 800H-24HRR5KL8AX
No Lamp 0…250V AC/DC No Knob M M 800T-25HXN2KB6AX 800H-25HRXN2KB6AX
Universal LED 12…130V AC/DC Red M M 800T-2HRH2KB6AX 800H-2HRRH2KB6AX
S→M‡  800T-2HRH4KL8AX 800H-2HRRH4KL8AX
M←S 800T-2HRH5KL8AX 800H-2HRRH5KL8AX
Transformer Incandescent 120V AC 50/60 Hz Red X
O
O
X
M M 800T-16HR2KB6AX 800H-16HRR2KB6AX
S→M‡  800T-16HR4KL8AX 800H-16HRR4KL8AX
M←S 800T-16HR5KL8AX 800H-16HRR5KL8AX
LED M M 800T-16HRH2KB6AX 800H-16HRRH2KB6AX
S→M‡  800T-16HRH4KL8AX 800H-16HRRH4KL8AX
M←S 800T-16HRH5KL8AX 800H-16HRRH5KL8AX
No Lamp 120V AC 50/60 Hz No Knob M M 800T-16HXN2KB6AX 800H-16HRXN2KB6AX
  
Note: X = Closed/O = Open
⋆ Operator only supplied without power module, lamp, lens cap, or contact blocks. ‡ Target tables are reversed from those shown.

                                                   1st Level    2nd Level
800 T       16    H    R          2    KB6    A    X
   a    b    c    d    e    f    g    h    i    j

Click to enlarge - 800T_800H-1_15-5


a    b    c    d
Protection Rating Finger-Safe Guards Power Module Type and Voltage No. of Positions
Full Voltage — Incandescent Bul. 800T
Type 4/13
Description Bul. 800H
Type 4/4X/13
Code Description Code Description Code Description Code Code
T Metal, Type 4/13 Blank No guards 12 12V AC/DC H 2-position HR
H Plastic, Type 4/4X/13 C Guards on terminals 24 24V AC/DC  
    48 48V AC/DC
Universal — LED
2 12…130V AC/DC
Transformer
16 120V AC 50/60 Hz
26 240V AC 50/60 Hz
For other voltages, please contact your local Rockwell Automation sales office or Allen‑Bradley distributor.

e    f    g    h
Knob Color Illumination Options Operator Function and Knob Type Cam Options
Standard Knob or No Knob 2-Position
Code Color Code Description Code Operator Function Code Operator Function
A Amber Blank Incandescent 2 Maintained KB6 Maintained cam
B Blue H LED 4 Spring return from left KL8 Spring return cam
C Clear   5 Spring return from right  
G Green Knob Lever
R Red 17 Maintained
W White 18 Spring return from left
X No knob 19 Spring return from right

i, j
Contact Blocks∆ 
Code Description
Blank (both pos.) No contacts
Standard
D 1 N.O.
E 1 N.C.
A 1 N.O. - 1 N.C.
X No contacts in this position
PenTUFF (Low Voltage)
H 1 N.O.
U 1 N.C.
F 1 N.O. - 1 N.C.
Class 1, Div. 2
Logic Reed
V 1 N.O.
W 1 N.C.
T 1 N.O. - 1 N.C.
Sealed Switch
R 1 N.O.
S 1 N.C.
P 1 N.O. - 1 N.C.
Stackable Sealed Switch
5 1 N.O.
6 1 N.C.
7 1 N.O. - 1 N.C.

Table 1.  Selector Switch Cam Targets

Cam Description (2-Position)
Target Contact Block Code♠ 
Click to enlarge - 800T_800H-1_9-4 Click to enlarge - 800T_800H-1_9-5
O X D, H, V, R, 5
X O E, U, W, S, 6

X = Closed/O = Open


Table 2.  Contact Block Code Reduction Rules

Contact Block Substitution
Combination Code
Standard
D + E A
D + D M
E + E N

∆ Contact blocks used on white side only.
♠ Target tables are reversed for spring return from left operators.


3-Position Knob/Lever Type Selector Switch Devices, Illuminated

Click to enlarge - 800T_800H-1_16-1      Click to enlarge - 10_64_800h_sw
Standard Knob Operator
Cat. No. 800T-16JR2KB7AX
     Standard Knob Operator
Cat. No. 800H-16JRR2KB7AX

Type Lamp Type Volts Color Operator Position M = Maintained
S = Spring Return
Type 4/13 Type 4/4X/13
Click to enlarge - 800T_800H-1_9-4 Click to enlarge - 800T_800H-1_11-5 Click to enlarge - 800T_800H-1_9-5 Standard Knob Standard Lever
Cat. No. Cat. No.
Operator Only⋆  No Contacts M M M 800T-00JX2KB7
Full Voltage Incandescent 24V AC/DC Red X
O
O
O
O
X
M M M 800T-24JR2KB7AX 800H-24JRR2KB7AX
S→M M 800T-24JR4KB7AX 800H-24JRR4KB7AX
M M←S 800T-24JR5KB7AX 800H-24JRR5KB7AX
No Lamp 0…250V AC/DC No Knob M M M 800T-25JXN2KB7AX
Universal LED 12…130V AC/DC Red M M M 800T-2JRH2KB7AX 800H-2JRRH2KB7AX
S→M M 800T-2JRH4KB7AX 800H-2JRRH4KB7AX
M M←S 800T-2JRH5KB7AX 800H-2JRRH5KB7AX
Transformer Incandescent 120V AC 50/60 Hz Red X
O
O
O
O
X
M M M 800T-16JR2KB7AX 800H-16JRR2KB7AX
S→M M 800T-16JR4KB7AX 800H-16JRR4KB7AX
M M←S 800T-16JR5KB7AX 800H-16JRR5KB7AX
LED M M M 800T-16JRH2KB7AX 800H-16JRRH2KB7AX
S→M M 800T-16JRH4KB7AX 800H-16JRRH4KB7AX
M M←S 800T-16JRH5KB7AX 800H-16JRRH5KB7AX
No Lamp No Knob M M M 800T-16JXN2KB7AX
  
Note: X = Closed/O = Open
⋆ Operator only supplied without power module, lamp, lens cap, or contact blocks.

   1st Level    2nd Level
800 T       16    J    R          2    KB7    A    X
   a    b    c    d    e    f    g    h    i    j

Click to enlarge - 800T_800H-1_15-5


a    b    c    d
Protection Rating Finger-Safe Guards Power Module Type and Voltage No. of Positions
Full Voltage — Incandescent 800T
Type 4/13
Description 800H
Type 4/4X/13
Code Description Code Description Code Description Code Code
T Metal, Type 4/13 Blank No guards 12 12V AC/DC J 3-position JR
H Plastic, Type 4/4X/13 C Guards on terminals 24 24V AC/DC  
    48 48V AC/DC
Universal — LED
2 12…130V AC/DC
Transformer
16 120V AC 50/60 Hz
26 240V AC 50/60 Hz
For other voltages, please contact your local Rockwell Automation sales office or Allen‑Bradley distributor.

e    f    g    h
Knob Color Illumination Options Operator Function and Knob Type Cam Options
Standard Knob or No Knob 3-Position
Code Color Code Description Code Operator Function Code Operator Function
A Amber Blank Incandescent 2 Maintained KB7 B7 cam
B Blue H LED§  4 Spring return from left KC1 C1 cam
C Clear   5 Spring return from right KC7 C7 cam
G Green 91 Spring return from both KE7 E7 cam
R Red Knob Lever KQ1 Q1 cam
W White Code Operator Function KT1 T1 cam
X No knob 17 Maintained  
  18 Spring return from left
19 Spring return from right
20 Spring return from both

i, j
Contact Blocks♣ 
Code Description
Blank (both pos.) No contacts
Standard
A 1 N.O. - 1 N.C.
X No contacts in this position
PenTUFF (Low Voltage)
F 1 N.O. - 1 N.C.
Class 1, Div. 2
Logic Reed
T 1 N.O. - 1 N.C.
Sealed Switch
P 1 N.O. - 1 N.C.
Stackable Sealed Switch
7 1 N.O. - 1 N.C.

Table 1. Selector Switch Cam Targets

Target Cam Description (3-Position)
Click to enlarge - 800T_800H-1_9-4 Click to enlarge - 800T_800H-1_11-5 Click to enlarge - 800T_800H-1_9-5 KB7 KC1 KC7 KE7 KQ1 KT1
X O O D, H, V, R, 5 D, H, V, R, 5 D, H, V E, U, W, S, 6
O X O E, U, W, S, 6 E, U, W, S, 6 E, U, W, S, 6
O O X E, U, W, S, 6 D, H, V, R, 5 D, H, V, R, 5
X X O G, I J, Q J, Q
O X X J,Q J,Q E, U, W, S, 6
X O X G,I G,I D, H, V, R, 5

‡ LED only.
§ LEDs available in red, green, amber, blue, and white. White LEDs only available in 6V, 24V, 120V, and 130V full voltage and all transformer units. LED color matches lens color, except clear lens supplied with white LED and white lens supplied with amber LED. All LEDs except 120V have an internal shunt resistor for use with solid-state outputs.
♣ Contact blocks used on white side only.