30 mm

Product Overview


Click to enlarge - 10_50_800T


Click to enlarge - 10_50_800H


Bulletin 800T/800H 30.5 mm Push Buttons

Build a Catalog Number


Description

The Allen‑Bradley Bulletin 800T and 800H 30.5 mm push button product lines are in a class by themselves. They are designed and constructed to perform in the most demanding industrial environments. In terms of sealing and switching performance, you will not find a more dependable push button offering. Allen‑Bradley delivers more styles and options of operator types and contact blocks, offering flexibility to meet the most demanding specifications in the world’s toughest industrial environments.

Design innovation is key to the performance advantage provided in the Bulletin 800T and 800H offerings. New in this catalog are the Trigger Action E-Stop operators, the new standard bearer in a tamper-resistant design. Also new is the Universal LED Illumination option that accepts a wide 12…130V AC/DC voltage input. This is compatible with all illuminated operator types, allows retrofitting in existing installations, and incorporates super bright LED technology.


Standards Compliance

UL 508

CCC


Certifications

UL Listed
(File No. E14840, E10314
Guide No. NKCR, NOIV, NISD)

CSA Certified
(File No. LR1234, LR11924)

CSA C22.2, No. 14

CE Marked (EN/IEC 60947‑5‑1, EN/IEC 60947‑5‑5, EN ISO 13850)


Specifications⋆ 

Electrical Ratings
Contact ratings Refer to the contact ratings tables on Standard Contact Ratings.
Dielectric strength 2200V for one minute, 1300V for one minute (Logic Reed)
Electrical design life cycles 1,000,000 at max. rated load, 200,000 at max. rated load (Logic Reed)
Mechanical Ratings
Vibration 10…2000 Hz, 1.52 mm displacement (peak-to-peak) max./
10 G max. (except Logic Reed)
Shock 1/2 cycle sine wave for 11 ms ³ 25 G (contact fragility) and no damage at 100 G
Degree of protection Type 1/4/12/13 (800T); Type 1/4/4X/12/13 (800H); EN/IEC 60529 IP66/65
Mechanical design life cycles  
Push buttons (Momentary, non-illuminated, flush and extended head) 10,000,000 min.
(Momentary, illuminated) 250,000 min.
(Push-pull/twist-to-release) 250,000 min. ‡ 
Selector switches (Non-illuminated) 1,000,000 min.
(Illuminated, key-operated) 200,000 min.
Potentiometers 25,000 min.
All other devices 200,000 min.
Contact operation Shallow, mini, and low-voltage contact blocks: Slow, double make and break
Logic Reed and sealed switch contact blocks: Single break magnetic
Wire gauge/Terminal screw torque #18…14 AWG (#18…10 Max Duty) / 6…8 lbin
Typical operating forces  
Operators without contact blocks Flush, extended button, standard mushroom, jumbo plastic mushroom: 2 lbs max.
Jumbo and extended aluminum mushroom head: 3.95 lbs max.
Maintained selector switch: 3.6 inlb max.
Spring return selector switches 3.6 in•lb to stop, 0.2 inlb to return
Illuminated push buttons and push-to-test pilot lights 5 lb max.
2-position push-pull 8.0 lb max. push or pull
3-position push-pull 8 lb max. push to in position or pull to center position (15 lb max. pull to out position)
Twist-to-release or push-pull 9 lbs max. push or pull 30 in•oz max. twist, 6 in•oz minimum return
Potentiometer Rotational torque 3…12 in•oz; stopping torque 12 in•lb (minimum)
Contact blocks Standard 1 lb
Logic Reed 1 lb max.
Sealed switch 3 lb max. at 0.205 in. plunger travel
Stackable sealed switch 1 lb max.
MaxDuty 1.4 lb max.
PenTUFF 1.4 lb max.
Self Monitoring 1.6 lb
Environment
Temperature range Operating -40…+131 °F (-40…+55 °C)
Storage -40…+185 °F (-40…+85 °C)
Note:Operating temperatures below freezing are based on the absence of moisture and liquids. Consult your local Rockwell Automation sales office or Allen-Bradley distributor for use in lower temperature applications.  
Humidity 50…95% RH from 77…140 °F (25…60 °C) per Procedure IV of MIL-STD-810C,
Method 507.1 cycling test
  
⋆ Performance Data — See Performance Data.
‡ Illuminated Trigger Action E-stops are rated for 150,000 min. mechanical operations when using Cat. No. 800TC-XD4S Self-Monitoring Contact Blocks (SMCBs).

Standard Contact Ratings

Minimum: 24V, 24 mA

Maximum thermal continuous current Ith 10 A AC/2.5 A DC. Bulletin 800T units with 800T-XA contacts have ratings as follows:


Max. Opertnl.
Volts Ue
Utilization Category Rated Operational Currents
IEC NEMA Volts Ue Make Break
AC 600 AC-15 A600 120…600
72…120
24…72
7200VA
60 A
60 A
720VA
720VA
10 A
DC 600 DC-13 Q600 28…600
24…28⋆ 
69VA
2.5 A
  
⋆ For applications below 24V/24 mA, PenTUFF or Logic Reed contacts are recommended.

Sealed Switch Contact Ratings

Minimum: 5V, 1 mA

Maximum continuous current Ith 5 A. Bulletin 800T units have control circuit ratings with sealed switch contact blocks as follows:


Max. Opertnl.
Volts Ue
Utilization Category Rated Operational Currents
IEC NEMA Volts Ue Make Break
AC 600 AC-15 B600 120…600
0…120
3600VA
30 A
360VA
3 A
DC 300 DC-13 P300 24…300
0…24
138VA
5.0 A
  

Stackable Sealed Switch Contact Ratings

Minimum: 5V, 10 mA (digital); 24V, 1 mA (analog)

Maximum continuous current Ith 2.5 A. Bulletin 800T units have control circuit ratings with sealed switch contact blocks as follows:


Max. Opertnl.
Volts Ue
Utilization Category Rated Operational Currents
IEC NEMA Volts Ue Make Break
AC 300 AC-15 C300 120…300
0…120
1800VA
15 A
180VA
1.5 A
DC 150 DC-13 Q150 24…150
0…24
69VA
2.5 A
  

Logic Reed Contact Ratings

Minimum — DC: 5V, 1 mA
Maximum — DC: 30V, 0.06 A, AC: 150V, 0.15 A
Should only be used with resistive loads.


Materials Used in 800H Type 4X Operators
Thermoplastic Polyester (Fiberglass Reinforced)



Thermoplastic Polyester


Transparent Amorphous Nylon


Glass Filled Crystalline Nylon


Mineral Filled Nylon


Nitrile (Synthetic Rubber)


PenTUFF™ (Low Voltage) Contact Ratings

Minimum DC: 5V, 1 mA
Maximum thermal continuous current Ith 2.5 A AC/1.0 A DC. Bulletin 800T units with 800T-XAV contacts have ratings as follows:


Max. Opertnl.
Volts Ue
Utilization Category Rated Operational Currents
IEC NEMA Volts Ue Make Break
AC 300 AC-15 C300 120…300
0…120
1800VA
15 A
180VA
1.5 A
DC 150 DC-13 R150 24…150
0…24
28VA
1.0 A
  

Snap Action Contact Ratings

Max. Opertnl.
Volts Ue
Contact Rating
Designation
Rated Operational Currents
Volts Ue Make Break
AC 300 A300 120…300
24…72
7200VA
60 A
720VA
10 A
DC 250 230…250
115…125
0.2 A
0.4 A
  

MaxDuty Contact Rating

Maximum thermal continuous current Ith 24 A.
Pilot Duty — 120V AC, 12 A; 24V DC, 10 A
Motor Ratings — 120V AC, 1.5 Hp; 240V AC, 3 Hp; 24V DC,
10 A FLA/60 A LRA


Time Delay Contacts

Max. Opertnl.
Volts Ue
Contact Rating
Designation
Rated Operational Currents
Volts Ue Make Break
AC 120 B150 120 3600VA 360VA
  
Note:This device is not rated for DC applications.

Adjustment range: 0.5…15 s ± 25% Ith = 5 A

Assembled & DeviceNet Stations

Assembled Stations

Click to enlarge - 800T_800H-1_3-1      Click to enlarge - 800T_800H-1_3-2      Click to enlarge - 800T_800H-1_3-3
Die Cast Aluminum
Cat. No. 800T-2TAR
     Booted Operator – Stainless Steel
Cat. No. 800H-1HA4T
     Booted Operator – Glass Polyester
Cat. No. 800H-1HA4R

Operator Contact Symbol Contact Action Button Type Button Color Legend Marking Type 4/13 Type 4/4X/13
Die Cast
Aluminum
Booted Operator
– Stainless Steel
Booted Operator
– Glass Polyester
Cat. No. Cat. No.⋆  Cat. No.⋆ 
One Push Button Click to enlarge - 800T_800H-1_3-4 1 N.O. - 1 N.C. Momentary Extended Red STOP 800T-1TA 800H-1HA4T 800H-1HA4R
Momentary Flush Green START 800T-1TB 800H-1HB4T 800H-1HB4R
Momentary Flush Black No Legend 800T-1TX 800H-1HX4T 800H-1HX4R
Two Push Buttons Click to enlarge - 800T_800H-1_3-4 1 N.O. - 1 N.C.
Each Button
Momentary Flush
Extended
Green
Red
START
STOP
800T-2TA 800H-2HA4T 800H-2HA4R
Momentary Flush
Flush
Black
Black
No Legend 800T-2TX 800H-2HX4T 800H-2HX4R
One Pilot Light, Two Push Buttons Click to enlarge - 800T_800H-1_3-6 1 N.O. - 1 N.C.
Each Button
Momentary 120V AC
Flush
Extended
Red
Green
Red
No Legend
START
STOP
800T-2TAR 800H-2HAR4T 800H-2HAR4R
Click to enlarge - 800T_800H-1_3-4 Momentary 120V AC
Flush
Flush
Red
Black
Black
No Legend 800T-2TXR 800H-2HXR4T 800H-2HXR4R
3-Position Selector Switch Click to enlarge - 800T_800H-1_3-8 1 N.O. - 1 N.C. Maintained Knob Lever Black with white insert HAND-OFF-AUTO 800T-R3TA
Maintained Knob Lever Black with white insert No Legend 800T-R3TX
One Push Button Click to enlarge - 800T_800H-1_3-9 1 N.C.L.B. Maintained Push-Pull/Twist Red EMERG STOP 800T-1TYM‡ 
Two Push Buttons Click to enlarge - 800T_800H-1_3-10 1 N.O. - 1 N.C. Maintained Flush
Extended
Green
Red
START
STOP
800T-2TAM 800H-2HAM4T 800H-2HAM4R
Maintained Flush
Flush
Black
Black
No Legend 800T-2TXM 800H-2HXM4T 800H-2HXM4R
  
⋆ Boot material is chlorosulfonated polyethylene. Add suffix L to the cat. no. for station with bootless operators. Example: Cat. No. 800H-1HB4T becomes Cat. No. 800H-1HB4TL.
‡ Supplied with yellow legend plate to comply with IEC 60947-5-5 and NFPA79 E-Stop standards that require yellow background.

DeviceNet Stations

Click to enlarge - 800t_dlpb


Two-Unit    800T                                   
            a    b    c    d    c    d    e   
                        (Hole One c + d)    (Hole Two c + d)                              
Three-Unit    800T                                             
            a    b    c    d    c    d    c    d    e   
                        (Hole One c + d)    (Hole Two c + d)    (Hole Three c + d)                  
Four-Unit    800T                                                    
            a    b    c    d    c    d    c    d    c    d    e
                        (Hole One c + d)    (Hole Two c + d)    (Hole Three c + d)    (Hole Four c + d)      

a    b    c    d    e
Orientation Enclosure Style Operator Types Color/Text External I/O Version♦ 
Code Description Code Description Yellow Code Code Description Code Description Code Description
V Vertical A 2-hole K A Non-illuminated flush (800T-A*) 1 Green Blank No external I/O
H Horizontal B 3-hole L B Non-illuminated extended (800T-B*) 2 Black (non-illuminated only) A 1 input/1 output (sinking)
  C 4-hole M C Non-illuminated mushroom (800T-D*) 3 Orange (non-illuminated only) B 1 input/1 output (sourcing)
G E-stop only♣  N D Illuminated mushroom (800T-QM*) 4 Grey (non-illuminated only) C 2 input
  E Illuminated extended (800T-QB*) 5 White E 2 output (sourcing)
F Illuminated guarded (800T-QA*) 6 Red F 1 E-stop block∆ 
G 2-position SS maintained (800T-H2*) 7 Blue G 2 E-stop blocks∆ 
H 3-position SS maintained (800T-J2*) 8 Clear (illuminated only) H 2 input + 2 input
J Enhanced pilot light (800T-QH*) 9 Yellow (non-illuminated)/amber (illuminated) K 2 input + 2 output (sourcing)
K Non-illuminated 2-position push/pull (800T-FX*)§  A Green with Start legend L 1 input/1 output (sinking) + 1 E-stop block∆ 
L Non-illuminated push/pull twist-to-release (800T-FXT*)§  B Red with Stop legend M 1 input/1 output (sourcing) + 1 E-stop block∆ 
M Illuminated 2-position push/pull (800T-FXQH*) C Red with E-Stop legend N 1 input/1 output (sinking) + 2 E-stop blocks∆ 
N 2-position key SS (800T-H33*)‡  D Black with Off/On legend P 1 input/1 output (sourcing) + 2 E-stop blocks∆ 
P 3-position key SS (800T-J44*)‡  E Black with Hand/Off/Auto legend Q 2 input + 1 E-stop block∆ 
Q 2-position SS spring return from right (800T-H5*) F Red with Push to Stop/Pull to Start legend R 2 input + 2 E-stop blocks∆ 
R 3-position SS spring return from all (800T-J91*) G Blue with Reset legend U 2 output (sourcing) + 1 E-stop block∆ 
T Illuminated 2-position SS maintained (800T-24H*H*) H Red with Power On legend W 2 output (sourcing) + 2 E-stop blocks∆ 
U Illuminated 3-position SS maintained (800T-24J*H*) X N/A (i.e. key ss) X 2 input + 1 input/1 output (sinking)
V Non-illuminated 3-position push/pull (800T-FXM*)    
W Potentiometer♠ 

‡ Operator Types N and P from Table c must choose Color/Text option X from Table d.
§ Operator Types K and L from Table c may be used as Emergency Stops. To be valid as an E-Stop, the operators must use Color/Text option C from Table d and it must be placed in the last hole position in the enclosure. An E-Stop connector also must be chosen from Table e.
♣ Enclosure Style option G from Table b can only select one operator from Table c. Valid options are K and L with E-Stop.
∆ External I/O Versions F, L, M, Q, and U receive only one contact block for the external E-Stop string. These connectors are rated to 3 A. If more than 3 A of current is needed or if there are two E-Stop strings, use External I/O Versions G, N, P, R, and W. These versions receive two contact blocks. This allows for 6 A of switching or for two E-Stop strings.
♦ This is an 8-in/4-out device. 2-in/1-out is assigned to each hole position in the enclosure. If a 2-hole enclosure is selected, 4-in and 2-out are assigned internally and up to 4 unassigned I/O points can be assigned to external connectors. This device contains up to two physical external I/O connectors. The “+” symbol in the Description field of Table e indicates that two external connectors exist. If an E-Stop connector is used, 2 unassigned I/O points can be assigned to the other connector.
♠ Available for certain applications, please contact your local Allen-Bradley distributor.


DeviceNet is a trademark of the Open DeviceNet Vendor Association (ODVA). DeviceLogix is a trademark of Rockwell Automation.

Trigger Action E-Stops

2-Position Red Trigger Action Twist-to-Release, Non-Illuminated

Click to enlarge - 800T-TFXJET6_4c      Click to enlarge - 800T-TFXLET6_4c      Click to enlarge - 800T-TFXK6_4c      Click to enlarge - 800H-TFRXT6_4c
Cat. No. 800T-TFXJET6      Cat. No. 800T-TFXLET6      Cat. No. 800T-TFXK6      Cat. No. 800H-TFRXT6


Contact Type Operator Position Type 4/13 Type 4/4X/13
Click to enlarge - 800T_800H-1_4-4 Click to enlarge - 800T_800H-1_4-5 45 mm Plastic 63 mm Metal Key Release 45 mm Plastic
Out In Cat. No.⋆ ‡ §  Cat. No.⋆ ♣  Cat. No.⋆ ∆  Cat. No.⋆ ‡ § 
No contacts 800T-TFXT6 800T-TFXLT6 800T-TFXK6 800H-TFRXT6
1 N.C. X O 800T-TFXT6D2 800T-TFXLT6D2 800T-TFXK6D2 800H-TFRXT6D2
1 N.O. - 1 N.C. O
X
X
O
800T-TFXT6A 800T-TFXLT6A 800T-TFXK6A 800H-TFRXT6A
1 S.M.C.B.♦  X O 800TC-TFXT6D4S 800TC-TFXLT6D4S 800TC-TFXK6D4S 800HC-TFRXT6D4S
2 N.C.♠  X
X
O
O
800T-TFXT6A4 800T-TFXLT6A4 800T-TFXK6A4 800H-TFRXT6A4
2 S.M.C.B. X
X
O
O
800TC-TFXT6A5S 800TC-TFXLT6A5S 800TC-TFXK6A5S 800HC-TFRXT6A5S
  
⋆ For finger-safe contact block terminals, add a C to the cat. no. Example: Cat. No. 800TC-TFXT6 or 800HC-TFRXT6.
‡ To order a device with a jumbo (60 mm) plastic head add the letter J after X. Example: Cat. No. 800T-TFXJT6A or 800H-TFRXJT6A.
§ To order a jumbo head device with "E-STOP" printed on the cap add the letters JE after X. Example: Cat. No. 800T-TFXJET6 or 800H-TFRXJET6.
♣ To order a device with "E-STOP" engraved on the cap add the letter E after L. Example: Cat. No. 800TC-TFXLET6D4S.
∆ Provided with two DO18 keys.
♦ Self-monitoring contact block.
♠ Supplied with two 800T-XD2 contact blocks.

800 T       TFX    T    6    D2
   a    b    c    d          e

a    b    c
Protection Rating Finger-Safe Guards Head Type§ 
Bul. 800T
Type 4/13
Description Bul. 800H
Type 4/4X/13
Code Description Code Description Code Code
T Metal, Type 4/13 Blank No guards TFX Standard (45 mm) mushroom head TFRX
H Plastic, Type 4/4X/13 C Guards on terminals TFXJ Jumbo (60 mm) mushroom head TFRXJ
    TFXJE Jumbo (60 mm) mushroom head with "E‑STOP" TFRXJE
TFXK 45 mm mushroom head key release
TFXL 63 mm anodized aluminum head
TFXLE 63 mm anodized aluminum head with "E‑STOP"

d    e
Release Function Contact Block(s)
Code Color Code Operator Position Description
Blank Key release♠  Click to enlarge - 800T_800H-1_4-4 Click to enlarge - 800T_800H-1_4-5
T Twist release Out In
  Blank No contacts on operator
Standard
D2 X O 1 N.C.
A O
X
X
O
1 N.O. - 1 N.C.
A4 X
X
O
O
2 N.C.
PenTUFF (Low Voltage)
D2V X O 1 N.C.
AV O
X
X
O
1 N.O. - 1 N.C.

Note:X = Closed/O = Open
♠ Configurable only with FXK head type.


2-Position Red Trigger Action Twist-to-Release, Illuminated

Click to enlarge - 800T-TFXTS00R_4c      Click to enlarge - 800T-TFXJETS00R_4c      Click to enlarge - 800H-TFRXTS00R_4c      Click to enlarge - 800H-TFRXJETS00R_4c
Cat. No. 800T-TFXTS00R      Cat. No. 800T-TFXJETS00R      Cat. No. 800H-TFRXTS00R      Cat. No. 800H-TFRXJETS00R


Type Volts Contacts Operator Position Type 4/13 Type 4/4X/13
Click to enlarge - 800T_800H-1_4-4 Click to enlarge - 800T_800H-1_4-5 45 mm⋆  60 mm⋆ ‡  45 mm⋆  60 mm⋆ ‡ 
Out In Cat. No. Cat. No. Cat. No. Cat. No.
Operator only§  No contacts 800T-TFXTS00R 800T-TFXJTS00R 800H-TFRXTS00R 800H-TFRXJTS00R
Universal 12…130V AC/DC N.O. - N.C. O
X
X
O
800T-TFXTQH2RA 800T-TFXJTQH2RA 800H-TFRXTQH2RA 800H-TFRXJTQH2RA
Transformer 120V AC 50/60 Hz 800T-TFXTPH16RA 800T-TFXJTPH16RA 800H-TFRXTPH16RA 800H-TFRXJTPH16RA
  
Note:X = Closed/O = Open
⋆ For finger-safe contact block terminals, add a C to the cat. no. Example: Cat. No. 800TC-TFXTS00R or 800HC-TFRXTS00R.
‡ To order a device with "E-STOP" printed on the cap add the letter E after J. Example: Cat. No. 800T-TFXJETQH2RA or 800H-TFRXJETQH2RA.
§ Operator-only supplied without power module, lamp, or contact blocks.

800 T       TFXT    QH    2    R    A
   a    b    c    d    e          f

a    b    c
Protection Rating Finger-Safe Guards Head Type♣ 
Code Description Code Description 800T
Type
4/13
Description 800H
Type
4/4X/13
T Metal, Type 4/13 Blank No guards Code Code
H Plastic, Type 4/4X/13 C Guards on terminals TFXT Standard (45 mm) mushroom head TFRXT
    TFXJT Jumbo (60 mm) mushroom head TFRXJT
TFXJET Jumbo (60 mm) mushroom head with "E‑STOP" TFRXJET

d    e    f
Illumination Option Voltage Target
Code Description Transformer Contact Click to enlarge - 800T_800H-1_4-4 Click to enlarge - 800T_800H-1_4-5
PH Transformer with LED lamp Code Description N.O. O X
QH Universal with LED lamp 16 120V AC 50/60 Hz N.C./
N.C.L.B./
S.M.C.B.
X O
  26 240V AC 50/60 Hz Contact Blocks
46 480V AC 50/60 Hz Code Description
56 600V AC 50/60 Hz Blank No contacts
Universal Standard
Code Description D2 1 N.C.
2 12…130V AC/DC D4S 1 S.M.C.B.
  A 1 N.O. - 1 N.C.
G1 2 N.O. - 2 N.C.
PenTUFF (Low Voltage)
D2V 1 N.C.
AV 1 N.O. - 1 N.C.
G1V 2 N.O. - 2 N.C.

Note:X = Closed/O = Open


Momentary Contact Push Buttons

Momentary Contact Push Button Devices, Non-Illuminated

Click to enlarge - 800T_800H-1_6-1      Click to enlarge - 800T_800H-1_6-2      Click to enlarge - 800T_800H-1_6-3      Click to enlarge - 800T_800H-1_6-4
Flush Head Unit
Cat. No. 800T-A1A
     Extended Head Unit
Cat. No. 800T-B6A
     Booted Unit
Cat. No. 800H-R2A
     Bootless Flush Head Unit
Cat. No. 800H-AR1A

Contact Type Button Color Type 4/13 Type 4/4X/13
Flush Head Extended Head Booted⋆  Bootless
Flush Head
Cat. No. Cat. No. Cat. No. Cat. No.
No Contact Green 800T-A1 800T-B1 800H-R1 800H-AR1
Black 800T-A2 800T-B2 800H-R2 800H-AR2
Red 800T-A6 800T-B6 800H-R6 800H-AR6
Click to enlarge - 800T_800H-1_6-5 1 N.O. Green 800T-A1D1 800T-B1D1 800H-R1D1 800H-AR1D1
Black 800T-A2D1 800T-B2D1 800H-R2D1 800H-AR2D1
Red 800T-A6D1 800T-B6D1 800H-R6D1 800H-AR6D1
Click to enlarge - 800T_800H-1_6-6 1 N.C. Green 800T-A1D2 800T-B1D2 800H-R1D2 800H-AR1D2
Black 800T-A2D2 800T-B2D2 800H-R2D2 800H-AR2D2
Red 800T-A6D2 800T-B6D2 800H-R6D2 800H-AR6D2
Click to enlarge - 800T_800H-1_3-4 1 N.O. - 1 N.C. Green 800T-A1A 800T-B1A 800H-R1A 800H-AR1A
Black 800T-A2A 800T-B2A 800H-R2A 800H-AR2A
Red 800T-A6A 800T-B6A 800H-R6A 800H-AR6A
  

800 T       A    1          A
   a    b    c    d    e    f

Click to enlarge - 800T_800H-1_6-8


a    b    c
Protection Rating Finger-Safe Guards Operator Type
800T
Type 4/13
Description 800H
Type 4/4X/13
Code Description Code Description Code Code
T Metal, Type 4/13 Blank No guards A Flush head AR
H Plastic, Type 4/4X/13 C Guards on terminals B Extended head BR
    D Mushroom head DR
DX Mushroom head less color cap DRX
Bootless guarded head GR
Booted head R⋆ 

d    d (cont'd)    e
Color Cap Color Cap Special Mushroom Head
Code Description Code Description Code Description
Blank Used only when ordering
Operator Type DX/DRX
4 Grey‡  J♣  Jumbo mushroom head — plastic
1 Green 5 White‡  L♣  Jumbo mushroom head — metal
2 Black 6 Red Note:Special mushroom head options only apply to mushroom head operator type code D/DR (Table c).
3 Orange‡  7 Blue
  9 Yellow

f    f (cont'd)    f (cont'd)
Contact Block(s) Contact Block(s) Contact Block(s)
Code Description Code Description Code Description
Blank No contacts
Standard PenTUFF (Low Voltage) Class 1, Div. 2
D1 1 N.O. D1V 1 N.O. Sealed Switch
D2 1 N.C. D2V 1 N.C. D1P 1 N.O.
D3 1 N.O.E.M. D3V 1 N.O.E.M. D2P 1 N.C.
D4 1 N.C.L.B. D4V 1 N.C.L.B. AP 1 N.O. - 1 N.C.
D5 1 N.O. (Mini) AV 1 N.O. - 1 N.C. BP 2 N.O. - 2 N.C
D6 1 N.C. (Mini) BV 2 N.O. - 2 N.C. Stackable Sealed Switch
A1 1 N.C.L.B. - 1 N.O. Time Delay D1Y 1 N.O.
A2 2 N.O.§  T 1 N.O.
Depress close, delayed opening
D2Y 1 N.C.
A4 2 N.C. S 1 N.C.
Depress open, delayed closure
A2Y 2 N.O.
A7 1 N.C.L.B. - 1 N.C. Snap Action A4Y 2 N.C.
A 1 N.O. - 1 N.C. M 1 N.O. - 1 N.C. AY 1 N.O. - 1 N.C.
B 2 N.O. - 2 N.C. N 2 N.O. - 2 N.C. BY 2 N.O. - 2 N.C
  Class 1, Div. 2  
Logic Reed
D1R 1 N.O.
D2R 1 N.C.
A2R 2 N.O.§ 
A4R 2 N.C.
AR 1 N.O. - 1 N.C.
BR 2 N.O. - 2 N.C.

Time Delay Contacts
Series C field installable kits can only be used with Series T or later operators. Adjustable range of 0.5 to 15 s + 25%. Maximum continuous current Ith 5 A.

Snap Action Contacts
Snap-action contacts feature a quick make, quick break snap-action mechanism that is only available on factory assembled units. Maximum continuous current Ith 10 A.

⋆ Underlying operators are extended head. Boot material is chlorosulfonated polyethylene.
‡ Not available for booted operators.
§ A2 and A2R contact blocks cannot be stacked upon, but can stack on other contact blocks.
♣ Jumbo mushroom heads not available in white color.


Momentary Contact Push Button Devices, Illuminated

Click to enlarge - 800T_800H-1_7-1      Click to enlarge - 800T_800H-1_7-3
Extended Head Without Guard
Cat. No. 800T-PB16R
     Extended Head without Guard
Cat. No. 800H-PRB16R

Type Lamp Type Volts Color Type 4/13 Type 4/4X/13
Extended Head
Without Guard⋆ 
Extended Head
With Guard⋆ 
Extended Head
without Guard⋆ 
Extended Head
with Guard⋆ 
Cat. No. Cat. No. Cat. No. Cat. No.
Operator Only‡  800T-SB00XX 800T-SA00XX 800H-SRB00XX 800H-SRA00XX
Full Voltage Incandescent 24V AC/DC Red 800T-QB24R 800T-QA24R 800H-QRB24R 800H-QRA24R
Green 800T-QB24G 800T-QA24G 800H-QRB24G 800H-QRA24G
Amber 800T-QB24A 800T-QA24A 800H-QRB24A 800H-QRA24A
No Lamp 0…250V AC/DC No Lens 800T-QBN25 800T-QAN25 800H-QRBN25 800H-QRAN25
Universal LED 12…130V AC/DC Red 800T-QBH2R 800T-QAH2R 800H-QRBH2R 800H-QRAH2R
Green 800T-QBH2G 800T-QAH2G 800H-QRBH2G 800H-QRAH2G
Amber 800T-QBH2A 800T-QAH2A 800H-QRBH2A 800H-QRAH2A
Transformer Incandescent 120V AC,
50/60 Hz
Red 800T-PB16R 800T-PA16R 800H-PRB16R 800H-PRA16R
Green 800T-PB16G 800T-PA16G 800H-PRB16G 800H-PRA16G
Amber 800T-PB16A 800T-PA16A 800H-PRB16A 800H-PRA16A
LED Red 800T-PBH16R 800T-PAH16R 800H-PRBH16R 800H-PRAH16R
Green 800T-PBH16G 800T-PAH16G 800H-PRBH16G 800H-PRAH16G
Amber 800T-PBH16A 800T-PAH16A 800H-PRBH16A 800H-PRAH16A
No Lamp No Lens 800T-PBN16 800T-PAN16 800H-PRBN16 800H-PRAN16
  
⋆ Includes as standard one Cat. No. 800T-XA (1 N.O. - 1 N.C.) contact block.
‡ Operator only supplied without power module, lamp, lens cap, or contact blocks.

800 T       P    B    H    16    R      
   a    b    c    d    e    f    g    h

Click to enlarge - 800T_800H-1_8-1


a    b    c
Protection Rating Finger-Safe Guards Power Module Type
800T
Type 4/13
Description 800H
Type 4/4X/13
Code Description Code Description Code Code
T Metal, Type 4/13 Blank No guards P Transformer
(or dual input)
PR
H Plastic, Type 4/4X/13 C Guards on terminals Q Full voltage/Universal QR

d    e
Head Type Illumination Options
Code Description Code Description
A Extended head with guard Blank Incandescent
B Extended head
without guard
H LED
M Mushroom Dual Input
MJ Jumbo mushroom D Diode type§ 
  T Transformer — relay type
TH Transformer — relay type LED

f    g    h
Voltage Lens Color Contact Block(s)
Transformer Code Description Code Description
Code Description Blank No lens with standard contacts 1 N.O. - 1 N.C. X No contacts
16 120V AC, 50/60 Hz X No lens if ordering any contacts other than standard 1 N.O. - 1 N.C. Standard
26 240V AC, 50/60 Hz A Amber Blank 1 N.O. - 1 N.C.
46 480V AC, 50/60 Hz B Blue D1 1 N.O.
56 600V AC, 50/60 Hz C Clear PenTUFF (Low Voltage)
Full Voltage — Incandescent G Green AV 1 N.O. - 1 N.C.
12 12V AC/DC R Red Class 1, Div. 2
24 24V AC/DC W White Logic Reed
48 48V AC/DC   AR 1 N.O. - 1 N.C.
10 120V AC/DC Sealed Switch
20 240V AC/DC AP 1 N.O. - 1 N.C.
Universal — LED Stackable Sealed Switch
2 12…130V AC/DC AY 1 N.O. - 1 N.C.
Dual Input  
16 120V AC
24 24V AC/DC♦ 

§ Diode type dual input provides circuit isolation via opposing diodes. Not recommended for use with solid-state outputs.
♦ Dual input diode only.


Momentary Contact Push Button Devices, Non-Illuminated — With Two-Color Molded Legend Caps

Click to enlarge - 800T-A00_4C      Click to enlarge - 800H-BR00_4C
Cat. No. 800T-A00 with Cat. No. 800T-LC103W installed      Cat. No. 800H-BR00 with Cat. No. 800T-LC604 installed

Operator Only


Button Type Type 4/13 Type 4/4X/13
Cat. No. Cat. No.
Flush 800T-A00 800H-AR00
Extended 800T-B00 800H-BR00
  

Legend Caps

Text Cap Color Text Color Cat. No.   Text Cap Color Text Color Cat. No.
| Green White 800T-LC101W IN Black White 800T-LC217W
START 800T-LC103W OUT 800T-LC218W
ON 800T-LC105W HIGH 800T-LC219W
START / | 800T-LC121W LOW 800T-LC220W
O Black White 800T-LC202W STOP / O 800T-LC222W
STOP 800T-LC204W | White Black 800T-LC501B
RESET 800T-LC207W START 800T-LC503B
800T-LC208W 800T-LC508B
FORWARD 800T-LC209W START / | 800T-LC521B
REVERSE 800T-LC210W O Red White 800T-LC602W
JOG 800T-LC212W STOP 800T-LC604W
UP 800T-LC213W OFF 800T-LC606W
DOWN 800T-LC214W STOP / O 800T-LC622W
RAISE 800T-LC215W RESET Blue White 800T-LC707W
LOWER 800T-LC216W R 800T-LC711W
  
Note:Package Qty. = 1

800 T       A    103W    A
   a    b    c    d    e

a    b    c
Protection Rating Finger-Safe Guards Operator Type
Code Description Code Description 800T
Type 4/13
Description 800H
Type 4/4X/13
T Metal, Type 4/13 Blank No guards Code Code
H Plastic, Type 4/4X/13 C Guards on terminals A Flush head AR
    B Extended head BR

d    e    e (cont'd)
Cap Text/Color Contact Block(s) Contact Block(s)
Code Text Color Code Description Code Description
Cap Text PenTUFF (Low Voltage)
101W | Green White Blank No contacts D1V 1 N.O.
103W START Standard D2V 1 N.C.
105W ON D1 1 N.O. D3V 1 N.O.E.M.
121W START / | D2 1 N.C. D4V 1 N.C.L.B.
202W O Black White D3 1 N.O.E.M. AV 1 N.O. - 1 N.C.
204W STOP D4 1 N.C.L.B. BV 2 N.O. - 2 N.C.
207W RESET D5 1 N.O. (Mini) Time Delay
208W D6 1 N.C. (Mini) T 1 N.O.
Depress close, delayed opening
209W FORWARD A1 1 N.C.L.B. - 1 N.O. S 1 N.C.
Depress open, delayed closure
210W REVERSE A2 2 N.O.§  Snap Action
212W JOG A4 2 N.C. M 1 N.O. - 1 N.C.
213W UP A7 1 N.C.L.B. - 1 N.C. N 2 N.O. - 2 N.C.
214W DOWN A 1 N.O. - 1 N.C. Class 1, Div. 2
215W RAISE B 2 N.O. - 2 N.C. Logic Reed
216W LOWER Class 1, Div. 2 D1R 1 N.O.
217W IN Sealed Switch D2R 1 N.C.
218W OUT D1P 1 N.O. A2R 2 N.O.§ 
219W HIGH D2P 1 N.C. A4R 2 N.C.
220W LOW AP 1 N.O. - 1 N.C. AR 1 N.O. - 1 N.C.
222W STOP / O BP 2 N.O. - 2 N.C BR 2 N.O. - 2 N.C.
501B | White Black Stackable Sealed Switch  
503B START D1Y 1 N.O.
508B D2Y 1 N.C.
521B START / | A2Y 2 N.O.
602W O Red White A4Y 2 N.C.
604W STOP AY 1 N.O. - 1 N.C.
606W OFF BY 2 N.O. - 2 N.C
622W STOP / O  
707W RESET Blue White
711W R

§ A2 and A2R contact blocks cannot be stacked upon, but can stack upon other contact blocks.


Selector Switches

2-Position Selector Switch Devices, Non-Illuminated

Click to enlarge - 800T_800H-1_9-1      Click to enlarge - 800T_800H-1_9-2      Click to enlarge - 800T_800H-1_9-3
Standard Knob Operator
Cat. No. 800T-H2A
     Knob Lever Operator
Cat. No. 800T-H17A
     Standard Knob Operator
Cat. No. 800H-HR2A

Contact Type Side Contact Operator Position M = Maintained
S = Spring Return
Type 4/13 Type 4/4X/13
Standard Knob Knob Lever Standard Knob
Click to enlarge - 800T_800H-1_9-4 Click to enlarge - 800T_800H-1_9-5 Cat. No. Cat. No. Cat. No.
No Contacts M M 800T-H2 800T-H17 800H-HR2
S→M 800T-H4 800T-H18 800H-HR4
M←S 800T-H5 800T-H19 800H-HR5
Click to enlarge - 800T_800H-1_6-5 1 N.O. White A O X M M 800T-H2D1 800T-H17D1 800H-HR2D1
S→M⋆  800T-H4D1 800T-H18D1 800H-HR4D1
M←S 800T-H5D1 800T-H19D1 800H-HR5D1
Click to enlarge - 800T_800H-1_3-4 1 N.O. - 1 N.C. White A
B
O
X
X
O
M M 800T-H2A 800T-H17A 800H-HR2A
S→M⋆  800T-H4A 800T-H18A 800H-HR4A
M←S 800T-H5A 800T-H19A 800H-HR5A
  
Note: X = Closed/O = Open
⋆ Target tables are reversed from those shown.

800 T       HA    2    A
   a    b    c    d    e

Click to enlarge - 800T_800H-1_9-8


a    b    c
Protection Rating Finger-Safe Guards Knob Insert Colors
800T
Type 4/13
Description 800H
Type 4/4X/13
Code Description Code Description Code Code
T Metal, Type 4/13 Blank No guards H White HR
H Plastic, Type 4/4X/13 C Guards on terminals HX Packet of colored inserts‡  HRX
    Metal Wing Lever Colors♣ 
Code Color Code
HA Red
HG Grey

d    e    e (cont'd)
Operator Type and Function Contact Block(s) Contact Block(s)
Standard Knob Code Description Code Description
Code Operator Function Contact Configuration 2-Position Contact Configuration
2 Maintained Click to enlarge - 800T_800H-1_9-4 Click to enlarge - 800T_800H-1_9-5 Class1, Div. 2
4 Spring return from left§  Blank No contacts Logic Reed∆ 
5 Spring return from right Standard D1R 1 N.O.
Knob Lever♣  D1 1 N.O. O X D2R 1 N.C.
17 Maintained D2 1 N.C. X O AR 1 N.O. - 1 N.C.
18 Spring return from left§  A 1 N.O. - 1 N.C. O X BR 2 N.O. - 2 N.C.
19 Spring return from right X O Sealed Switch∆ 
Metal Wing Lever♣  B 2 N.O. - 2 N.C. O X D1P 1 N.O.
11 Maintained X O D2P 1 N.C.
15 Spring return from left§  O X AP 1 N.O. - 1 N.C.
16 Spring return from right X O BP 2 N.O. - 2 N.C.
Coin Slot♣  Max Duty (Horsepower Rated)∆  Stackable Sealed Switch∆ 
6 Maintained D1M 1 N.O. D1Y 1 N.O.
7 Spring return from left D2M 1 N.C. D2Y 1 N.C.
8 Spring return from right PenTUFF (Low Voltage)∆  AY 1 N.O. - 1 N.C.
  D1V 1 N.O. BY 2 N.O. - 2 N.C.
D2V 1 N.C.  
AV 1 N.O. - 1 N.C.
BV 2 N.O. - 2 N.C.

‡ One insert of each color (blue, green, orange, red, and yellow).
§ Target tables are reversed from those shown.
♣ Only available on Bul. 800T, Type 4/13 operators.
∆ Contact target tables same as those listed for standard contact blocks.


2-Position Selector Switch Devices, Non-Illuminated (Bul. 800T only)

Click to enlarge - 800T_800H-1_10-1
2-Position Cylinder Lock Operator
Cat. No. 800T-H33A


Contact Type Side Contact Operator Position M = Maintained
S = Spring Return
Type 4/13
Cylinder Lock∆ 
Key Removal — Left‡  Key Removal — Right‡  Key Removal — Both‡ 
Click to enlarge - 800T_800H-1_9-4 Click to enlarge - 800T_800H-1_9-5 Cat. No. Cat. No. Cat. No.
No Contacts M M 800T-H31 800T-H32 800T-H33
M←S 800T-H48
Click to enlarge - 800T_800H-1_6-5 1 N.O. White A O X M M 800T-H31D1 800T-H32D1 800T-H33D1
S→M⋆  800T-H42D1
M←S 800T-H48D1
Click to enlarge - 800T_800H-1_3-4 1 N.O. - 1 N.C. White A
B
O
X
X
O
M M 800T-H31A 800T-H32A 800T-H33A
S→M⋆  800T-H42A
M←S 800T-H48A
  
Note: X = Closed/O = Open
⋆ Target tables are reversed from those shown.
‡ Keys removable from maintained positions only.

800 T       H31          A
   a    b    c    d    e

Click to enlarge - 800T_800H-1_9-8


a    b    c
Protection Rating Finger-Safe Guards Key Removal Position
Maintained
Code Description Code Description Code Operator Function
T Metal, Type 4/13 Blank No guards H31 Key removal — left
  C Guards on terminals H32 Key removal — right
  H33 Key removal — both
Spring Return From Left
Code Operator Function
H42 Key removal — right⋆ 
Spring Return From Right
Code Operator Function
H48 Key removal — left

d    e    e (cont'd)
Key Options
for Cylinder Locks∆ 
Key Options
for Cylinder Locks
Contact Block(s) Contact Block(s)
Code T Series
Key No.
Code T Series
Key No.
Code Description Code Description
Contact Configuration 2-Position
Click to enlarge - 800T_800H-1_9-4 Click to enlarge - 800T_800H-1_9-5
Blank D018 (Std. Key) 15 T112 Blank No contacts PenTUFF (Low Voltage)
03 D020 16 T115 Standard D1V 1 N.O.
04 D025 17 T324 D1 1 N.O. O X D2V 1 N.C.
05 D335 18 T382 D2 1 N.C. X O AV 1 N.O. - 1 N.C.
06 D429 19 T404 A 1 N.O. - 1 N.C. O X BV 2 N.O. - 2 N.C.
07 D461 20 T171 X O Class 1, Div. 2
08 D111 21 T484 B 2 N.O. - 2 N.C. O X Logic Reed♣ 
09 D587 22 T547 X O D1R 1 N.O.
10 D682 23 T569 O X D2R 1 N.C.
11 D713 24 T692 X O AR 1 N.O. - 1 N.C.
12 D900 25 T752 Max Duty (Horsepower Rated) BR 2 N.O. - 2 N.C.
13 D992 26 T178 D1M 1 N.O. Sealed Switch♣ 
14 D118 D2M 1 N.C. D1P 1 N.O.
    D2P 1 N.C.
AP 1 N.O. - 1 N.C.
BP 2 N.O. - 2 N.C.
Stackable Sealed Switch♣ 
D1Y 1 N.O.
D2Y 1 N.C.
AY 1 N.O. - 1 N.C.
BY 2 N.O. - 2 N.C.

⋆ Target tables are reversed from those shown.
‡ Keys removable from maintained positions only.
♣ Contact target tables same as those listed for standard and PenTUFF contact blocks.
∆ Device supplied with 2 keys. Replacement key part no. for standard D018 key is X-181170. See Replacement Keys for Cylinder Lock 2-, 3-, and 4-Position Selector Switches (800T only) for additional replacement key numbers.


3-Position Selector Switch Devices, Non-Illuminated

Click to enlarge - 800T_800H-1_11-1      Click to enlarge - 800T_800H-1_11-2      Click to enlarge - 800T_800H-1_11-3
Standard Knob Operator
Cat. No. 800T-J2A
     Knob Lever Operator
Cat. No. 800T-J17A
     Standard Knob Operator
Cat. No. 800H-JR2A

Contact Type Operator Position M = Maintained
S = Spring Return
Type 4/13 Type 4/4X/13
Standard Knob Knob Lever Standard Knob
Click to enlarge - 800T_800H-1_9-4 Click to enlarge - 800T_800H-1_11-5 Click to enlarge - 800T_800H-1_9-5 Cat. No. Cat. No. Cat. No.
No Contacts M M M 800T-J2 800T-J17 800H-JR2
S→M M 800T-J4 800T-J18 800H-JR4
M M←S 800T-J5 800T-J19 800H-JR5
S→M←S 800T-J91 800T-J20 800H-JR91
Click to enlarge - 800T_800H-1_3-4 O
X
O
O
X
O
M M M 800T-J2A 800T-J17A 800H-JR2A
S→M M 800T-J4A 800T-J18A 800H-JR4A
M M←S 800T-J5A 800T-J19A 800H-JR5A
1 N.O. - 1 N.C. S→M←S 800T-J91A 800T-J20A 800H-JR91A
  
Note: X = Closed/O = Open

800 T       J    2          C
   a    b    c    d    e    f

Click to enlarge - 800T_800H-1_11-7


a    b    c
Protection Rating Finger-Safe Guards Knob Insert Colors
800T
Type 4/13
Description 800H
Type 4/4X/13
Code Description Code Description Code Code
T Metal, Type 4/13 Blank No guards J White JR
H Plastic, Type 4/4X/13 C Guards on terminals JX Packet of colored inserts⋆  JRX
    Metal Wing Lever Colors‡ 
Code Color Code
JA Red
JG Grey

d
Knob/Lever Type Operators
Standard Knob
Code Operator Function
2 Maintained
4 Spring return from left
5 Spring return from right
91 Spring return from both
Knob Lever‡ 
Code Operator Function
17 Maintained
18 Spring return from left
19 Spring return from right
20 Spring return from both
Metal Wing Lever‡ 
Code Operator Function
11 Maintained
15 Spring return from left
16 Spring return from right
141 Spring return from both
Coin Slot‡ 
Code Operator Function
10 Spring return from both

e    e (cont'd)
Cam Option§  Cam Option§ 
Code Description Code Description
Blank KB7 cam (std.) KQ1 KQ1 cam
KA1 KA1 cam KQ7 KQ7 cam
KA7 KA7 cam KR1♣  KR1 cam
KC1 KC1 cam KR7♣  KR7 cam
KC7 KC7 cam KT1♣  KT1 cam
KD7 KD7 cam KT7♣  KT7 cam
KE7♣  KE7 cam KU7♣  KU7 cam
Note:See Table 1 for cam selections.

f    f (cont'd)
Contact Blocks Contact Blocks
Code Description Code Description
Blank No contacts on operator Blank No contacts
Standard Class 1, Div. 2
A 1 N.O. - 1 N.C.
1-800T-XA on white side
Logic Reed
B 2 N.O. - 2 N.C.
2-800T-XAs —
1 on white side/1 on black side
AR 1 N.O. - 1 N.C.
1-800T-XAR on white side
PenTUFF (Low Voltage) BR 2 N.O. - 2 N.C.
2-800T-XARs —
1 on white side/1 on black side
AV 1 N.O. - 1 N.C.
1-800T-XAV on white side
Sealed Switch
BV 2 N.O. - 2 N.C.
2-800T-XAVs —
1 on white side/1 on black side
AP 1 N.O. - 1 N.C.
1-800T-XAP on white side
  BP 2 N.O. - 2 N.C.
2-800T-XAPs —
1 on white side/1 on black side
Stackable Sealed Switch
AY 1 N.O. - 1 N.C.
1-800T-XAY on white side
BY 2 N.O. - 2 N.C.
2-800T-XAYs —
1 on white side/1 on black side
Note:Associated targets shown in Table 1.

⋆ One insert of each color (blue, green, orange, red, and yellow).
‡ Only available on Bul. 800T, Type 4/13 operators.
§ If an overlapping cam is required, consult your local distributor.
♣ Not available with wing levers.
∆ See Table 1 for cam selections and associated targets.


Table 1. Cam and Contact Block Functionality Table

Contact Block
Suffix Code
Circuits Cam Codes
KB7
(Std.)
KA1 KA7 KC1 KC7 KD7 KE7 KQ1 KQ7 KR1 KR7 KT1 KT7 KU7
Click to enlarge - 800T_800H-1_11-8 Click to enlarge - 800T_800H-1_11-9 Click to enlarge - 800T_800H-1_11-10 Click to enlarge - 800T_800H-1_11-11 A X O O X O O O O X O O X X O O O O X X O O X O X X O X X O X X O X O O X X O O X O O
B O O X O X O O X O O X O O X O O X O O X X O X O O X O O X O O X O X O O O O X O X O
  A X O O X O O O O X O O X X O O X O O O O X O O X X O O O O X X O O O O X X O O O O X
B O O X O X O O X O X O O O O X O X O X X O O X O O X O X X O O X X X X O O X X X X O
  A X O O X O O O O X O O X X O O O O X X O O X O X X O X X O X X O X O O X X O O X O O
B O O X O X O O X O O X O O X O O X O O X X O X O O X O O X O O X O X O O O O X O X O
  A X O O X O O O O X O O X X O O X O O O O X O O X X O O O O X X O O O O X X O O O O X
B O O X O X O O X O X O O O O X O X O X X O O X O O X O X X O O X X X X O O X X X X O

Note:X = Closed/O = Open

3-Position Selector Switch Devices, Non-Illuminated (Bul. 800T only)

Click to enlarge - 800T_800H-1_12-1
3-Position Cylinder Lock Operator
Cat. No. 800T-J41A


Contact Type Operator Position M = Maintained
S = Spring Return
Type 4/13
Click to enlarge - 800T_800H-1_9-4 Click to enlarge - 800T_800H-1_11-5 Click to enlarge - 800T_800H-1_9-5 Cylinder Lock♣ 
Key Removal — Left ⋆  Key Removal — Center ⋆  Key Removal — All ⋆ 
Cat. No. Cat. No. Cat. No.
No Contacts M M M 800T-J41 800T-J42 800T-J44
S→M M 800T-J50
M M←S 800T-J69 800T-J38
S→M←S 800T-J631
Click to enlarge - 800T_800H-1_3-4 O
X
O
O
X
O
M M M 800T-J41A 800T-J42A 800T-J44A
S→M M 800T-J50A
M M←S 800T-J69A 800T-J38A
1 N.O. - 1 N.C. S→M←S 800T-J631A
  
Note: X = Closed/O = Open
⋆ Key removable in maintained positions only.

800 T       J41          KC1    A
   a    b    c    d    e    f

Click to enlarge - 800T_800H-1_11-7


a    b    c
Protection Rating Finger-Safe Guards Key Removal Position
Maintained
Code Description Code Description Code Operator Function
T Metal, Type 4/13 Blank No guards J41 Key removal — left
  C Guards on terminals J42 Key removal — center
  J43 Key removal — right
J44 Key removal — all
J45 Key removal — left and center
J46 Key removal — right and left
J47 Key removal — right and center
Spring Return from Left
J50 Key removal — center
J52 Key removal — right
J51 Key removal — right and center
Spring Return from Right
J69 Key removal — left
J38 Key removal — center
J73 Key removal — left and center
Spring Return from Both
J631 Key removal — center

d    e    e (cont’d)
Key Options for Cylinder Locks♣  Cam Option‡  Cam Option‡ 
Code Key No. Code Description Code Description
Blank D018 (standard key) Blank KB7 cam (std.) KQ1 KQ1 cam
03 D020 KA1 KA1 cam KQ7 KQ7 cam
04 D025 KA7 KA7 cam KR1 KR1 cam
05 D335 KC1 KC1 cam KR7 KR7 cam
06 D429 KC7 KC7 cam KT1 KT1 cam
Note: Refer to 2-Position Selector Switch Devices, Non-Illuminated (Bul. 800T only)
for additional key option codes.
KD7 KD7 cam KT7 KT7 cam
KE7 KE7 cam KU7 KU7 cam
Note: See Table 1 for cam selections.

f    f (cont'd)
Contact Blocks Contact Blocks
Code Description Class 1, Div. 2
Blank No contacts Logic Reed
Standard Code Description
A 1 N.O. - 1 N.C.
1-800T-XA on white side
AR 1 N.O. - 1 N.C.
1-800T-XAR on white side
B 2 N.O. - 2 N.C.
2-800T-XAs — 1 on white side/1 on black side
BR 2 N.O. - 2 N.C.
2-800T-XARs —
1 on white side/1 on black side
PenTUFF (Low Voltage) Sealed Switch
AV 1 N.O. - 1 N.C.
1-800T-XAV on white side
AP 1 N.O. - 1 N.C.
1-800T-XAP on white side
BV 2 N.O. - 2 N.C.
2-800T-XAVs — 1 on white side/1 on black side
BP 2 N.O. - 2 N.C.
2-800T-XAPs —
1 on white side/1 on black side
  Stackable Sealed Switch
AY 1 N.O. - 1 N.C.
1-800T-XAY on white side
BY 2 N.O. - 2 N.C.
2-800T-XAYs —
1 on white side/1 on black side

⋆ Key removable in maintained positions only.
‡ If an overlapping cam is required, consult your local Rockwell Automation sales office or Allen-Bradley distributor.
♣ Device supplied with 2 keys. Replacement key part no. for standard D018 key is X-181170. See Replacement Keys for Cylinder Lock 2-, 3-, and 4-Position Selector Switches (800T only) for additional replacement key numbers.


Table 1. Cam and Contact Block Functionality Table

Contact Block
Suffix Code
Ckts Cam Codes
KB7
(Std.)
KA1 KA7 KC1 KC7 KD7 KE7 KQ1 KQ7 KR1 KR7 KT1 KT7 KU7
Click to enlarge - 800T_800H-1_11-8 Click to enlarge - 800T_800H-1_11-9 Click to enlarge - 800T_800H-1_11-10 Click to enlarge - 800T_800H-1_11-11 A X O O X O O O O X O O X X O O O O X X O O X O X X O X X O X X O X O O X X O O X O O
B O O X O X O O X O O X O O X O O X O O X X O X O O X O O X O O X O X O O O O X O X O
  A X O O X O O O O X O O X X O O X O O O O X O O X X O O O O X X O O O O X X O O O O X
B O O X O X O O X O X O O O O X O X O X X O O X O O X O X X O O X X X X O O X X X X O
  A X O O X O O O O X O O X X O O O O X X O O X O X X O X X O X X O X O O X X O O X O O
B O O X O X O O X O O X O O X O O X O O X X O X O O X O O X O O X O X O O O O X O X O
  A X O O X O O O O X O O X X O O X O O O O X O O X X O O O O X X O O O O X X O O O O X
B O O X O X O O X O X O O O O X O X O X X O O X O O X O X X O O X X X X O O X X X X O

4-Position Selector Switch Devices, Non-Illuminated

Click to enlarge - 800T_800H-1_13-1      Click to enlarge - 800T_800H-1_13-2      Click to enlarge - 800T_800H-1_13-3
Standard Knob Operator
Cat. No. 800T-N2KN4B
     Knob Lever Operator
Cat. No. 800T-N17KN4B
     Standard Knob Operator
Cat. No. 800H-NR2KF4AAXX

Contact Type Operator Position M = Maintained
S = Spring Return
Type 4/13 Type 4/4X/13
Click to enlarge - 800T_800H-1_13-4 Click to enlarge - 800T_800H-1_13-5 Click to enlarge - 800T_800H-1_13-6 Click to enlarge - 800T_800H-1_13-7 Standard Knob Knob Lever Standard Knob
Cat. No. Cat. No. Cat. No.
No Contacts M M M M 800T-N2KF4 800T-N17KF4 800H-NR2KF4
S→M M M 800T-N3KF4 800T-N29KF4 800H-NR3KF4
M M M←S 800T-N9KF4 800T-N30KF4 800H-NR9KF4
Click to enlarge - 800T_800H-1_3-4 X
O
O
O
O
X
O
O
O
O
X
O
O
O
O
X
M M M M 800T-N2KF4B 800T-N17KF4B 800H-NR2KF4AAXX
Click to enlarge - 800T_800H-1_3-4 S→M M M 800T-N3KF4B 800T-N29KF4B 800H-NR3KF4AAXX
2 N.O. - 2 N.C. M M M←S 800T-N9KF4B 800T-N30KF4B 800H-NR9KF4AAXX
  
Note: X = Closed/O = Open

800 T       N    2    KF4    B
   a    b    c    d    e    f

Click to enlarge - 800T_800H-1_11-7


a    b    c
Protection Rating Finger-Safe Guards Knob Insert Colors
800T
Type 4/13
Description 800H
Type 4/4X/13
Code Description Code Description Code Code
T Metal, Type 4/13 Blank No guards N White NR
H Plastic, Type 4/4X/13 C Guards on terminals NX Packet of colored inserts⋆  NRX
    Metal Wing Lever Colors
Code Color Code
NA Red
NG Grey

d    e
Operator Function and Knob Type Cam Option∆ 
Standard Knob
Code Operator Function Code Description
2 Maintained KF4 F cam
3 Spring return from position 1 to position 2 KG4 G cam
9 Spring return from position 4 to position 3 KK4♦  K cam
Knob Lever♣  KM4♦  M cam
Code Operator Function KP4 P cam
17 Maintained KN4 Overlapping cam‡ 
29 Spring return from position 1 to position 2  
30 Spring return from position 4 to position 3
Metal Wing Lever♣ 
Code Operator Function
11 Maintained
13 Spring return from position 1 to position 2
14 Spring return from position 4 to position 3

f    f (cont'd)
Contact Blocks∆  Contact Blocks
800T
Type 4/13
Description 800H
Type 4/4X/13
800T
Type 4/13
Description 800H
Type 4/4X/13
Code Code Code Code
PenTUFF (Low Voltage)
Blank No contacts Blank BV 2 N.O. - 2 N.C. FFXX
Standard HV 3 N.O. - 3 N.C. FFFX
B 2 N.O. - 2 N.C. 2-800T-XAs —
1 on white side/1 on black side
AAXX CV 4 N.O. - 4 N.C. FFFF
H 3 N.O. - 3 N.C. 3-800T-XAs —
2 on white side/1 on black side
AAAX Class 1, Div. 2
C 4 N.O. - 4 N.C. 4-800T-XAs —
2 on white side/2 on black side
AAAA Logic Reed§ 
  BR 2 N.O. - 2 N.C. TTXX
HR 3 N.O. - 3 N.C. TTTX
CR 4 N.O. - 4 N.C. TTTT
Sealed Switch§ 
BP 2 N.O. - 2 N.C. PPXX
Stackable Sealed Switch♣ 
BY∆  2 N.O. - 2 N.C. TTXX
HY∆  3 N.O. - 3 N.C. TTTX
CY∆  4 N.O. - 4 N.C. TTTT

⋆ One insert of each color (blue, green, orange, red, and yellow).
‡ Overlapping cam. See Publication 800T-2.8 for overlap specifications.
§ Contact block mounting same as listed for standard and PenTUFF contact blocks.
♣ Only available on Bul. 800T, Type 4/13 operators.
∆ See Table 1 for proper cam/contact selection.
♦ Not available with wing levers.


Table 1. Cam and Contact Block Functionality Table

Contact Block
Suffix Code
Contact
Block
Side
Circuits Cam Codes
KF4 KG4 KK4 KM4 KP4 KN4‡ 
Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14 Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14 Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14 Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14 Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14 Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14
Click to enlarge - 800T_800H-1_11-8 Click to enlarge - 800T_800H-1_11-9 Click to enlarge - 800T_800H-1_11-10 White A X O O O X X O O O O X X X O O O O O O X O X O O
B O X O O O O X O X X O O O X X O O X O O O O O X
Black A O O O X X O O O X O O X O O O X O O X X O O X O
B O O X O O O O X O X X O O X O O X O O O X O O O
  White A X O O O X X O O O O X X X O O O O O O X O X O O
B O X O O O O X O X X O O O X X O O X O O O O O X
  Black A O O O X X O O O X O O X O O O X O O X X O O X O
B O O X O O O O X O X X O O X O O X O O O X O O O

Note:X = Closed/O = Open

4-Position Selector Switch Devices, Non-Illuminated (800T only)

Click to enlarge - 800T_800H-1_14-1
Cylinder Lock Operator
Cat. No. 800T-N32KF4B


Contact Type Operator Position M = Maintained
S = Spring Return
Cylinder Lock – Type 4/13♣ 
Click to enlarge - 800T_800H-1_13-4 Click to enlarge - 800T_800H-1_13-5 Click to enlarge - 800T_800H-1_13-6 Click to enlarge - 800T_800H-1_13-7 Key Removal — Position 2⋆  Key Removal — Position 3⋆  Key Removal — All⋆ 
Cat. No. Cat. No. Cat. No.
No Contacts M M M M 800T-N32KF4 800T-N33KF4 800T-N61KF4
S→M M M 800T-N132KF4 800T-N133KF4
M M M←S 800T-N232KF4 800T-N233KF4
Click to enlarge - 800T_800H-1_3-4 X
O
O
O
O
X
O
O
O
O
X
O
O
O
O
X
M M M M 800T-N32KF4B 800T-N33KF4B 800T-N61KF4B
Click to enlarge - 800T_800H-1_3-4 S→M M M 800T-N132KF4B 800T-N133KF4B
2 N.O. - 2 N.C. M M M←S 800T-N232KF4B 800T-N233KF4B
  
Note: X = Closed/O = Open
⋆ Key removable in maintained positions only.

800 T       N31          KM4    C
   a    b    c    d    e    f

Click to enlarge - 800T_800H-1_11-7


a    b    c    c (cont'd)
Protection Rating Finger-Safe Guards Key Removal Position and Operator Function Key Removal Position and Operator Function
Maintained Spring Return From Position 1 to Position 2
Code Description Code Description Code Operator Function Code Description
T Metal, Type 4/13 Blank No guards N31 Key removal position 1 N132 Key removal position 2
  C Guards on terminals N32 Key removal position 2 N133 Key removal position 3
  N33 Key removal position 3 N134 Key removal position 4
N34 Key removal position 4 N154 Key removal positions 2, 3, and 4
N61 Key removal all positions Spring Return From
Position 4 to Position 3
  Code Operator Function
N231 Key removal position 1
N232 Key removal position 2
N233 Key removal position 3
N251 Key removal positions 1, 2, and 3

d    e
Key Options for Cylinder Locks♣  Cam Option
D Series
Code Key No. Code Description
Blank D018 (standard key) KF4 F cam
03 D020 KG4 G cam
04 D025 KK4 K cam
05 D335 KM4 M cam
06 D429 KP4 P cam
Note: Refer to 2-Position Selector Switch Devices, Non-Illuminated (Bul. 800T only) for additional key option codes. KN4 Overlapping cam‡ 
Note: See Table 1 for proper cam selection.

f    f (cont'd)
Contact Blocks Contact Blocks
Code Description Code Description
Blank No contacts Sealed Switch§ 
Standard BP 2 N.O. - 2 N.C.
B 2 N.O. - 2 N.C.
2-800T-XAs —
1 on white side/1 on black side
Stackable Sealed Switch§ 
H 3 N.O. - 3 N.C.
3-800T-XAs —
2 on white side/1 on black side
BY 2 N.O. - 2 N.C.
C 4 N.O. - 4 N.C.
4-800T-XAs —
2 on white side/2 on black side
HY 3 N.O. - 3 N.C.
PenTUFF (Low Voltage) CY 4 N.O. - 4 N.C.
BV 2 N.O. - 2 N.C.
2-800T-XAVs —
1 on white side/1 on black side
 
HV 3 N.O. - 3 N.C.
3-800T-XAVs —
2 on white side/1 on black side
CV 4 N.O. - 4 N.C.
4-800T-XAVs —
2 on white side/2 on black side
Class 1, Div. 2
Logic Reed§ 
BR 2 N.O. - 2 N.C.
HR 3 N.O. - 3 N.C.
CR 4 N.O. - 4 N.C.
Note: Associated targets shown in Table 1.

Table 1. Cam and Contact Block Functionality Table

Contact Block
Suffix Code
Contact
Block
Side
Circuits Cam Codes
KF4 KG4 KK4 KM4 KP4 KN4‡ 
Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14 Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14 Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14 Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14 Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14 Click to enlarge - 800T_800H-1_13-11 Click to enlarge - 800T_800H-1_13-12 Click to enlarge - 800T_800H-1_13-13 Click to enlarge - 800T_800H-1_13-14
Click to enlarge - 800T_800H-1_11-8 Click to enlarge - 800T_800H-1_11-9 Click to enlarge - 800T_800H-1_11-10 White A X O O O X X O O O O X X X O O O O O O X O X O O
B O X O O O O X O X X O O O X X O O X O O O O O X
Black A O O O X X O O O X O O X O O O X O O X X O O X O
B O O X O O O O X O X X O O X O O X O O O X O O O
  White A X O O O X X O O O O X X X O O O O O O X O X O O
B O X O O O O X O X X O O O X X O O X O O O O O X
  Black A O O O X X O O O X O O X O O O X O O X X O O X O
B O O X O O O O X O X X O O X O O X O O O X O O O

Note: X = Closed/O = Open
⋆ Key removable in maintained positions only.
‡ Overlapping cam. One layer of contact blocks allowed, no stacking. See Publication 800T-2.8 for overlap specifications.
§ Contact block mounting same as listed for standard and PenTUFF contact blocks.
♣ Device supplied with 2 keys. Replacement key part no. for standard D018 key is X-181170. See Replacement Keys for Cylinder Lock 2-, 3-, and 4-Position Selector Switches (800T only) for additional replacement key numbers.


2-Position Knob/Lever Type Selector Switch Devices, Illuminated

Click to enlarge - 800T_800H-1_15-1      Click to enlarge - 800T_800H-1_15-2
Standard Knob Operator
Cat. No. 800T-16HR2KB6AX
     Knob Lever Operator
Cat. No. 800H-16HRR17KB6AX

Type Lamp Type Volts Knob Color Operator Position M = Maintained
S = Spring Return
Type 4/13 Type 4/4X/13
Standard Knob Standard Knob
Click to enlarge - 800T_800H-1_9-4 Click to enlarge - 800T_800H-1_9-5 Cat. No. Cat. No.
Operator Only⋆  No Contacts M M 800T-00HX2KB6 800H-00HRX2KB6
Full Voltage Incandescent 24V AC/DC Red X
O
O
X
M M 800T-24HR2KB6AX 800H-24HRR2KB6AX
S→M‡  800T-24HR4KL8AX 800H-24HRR4KL8AX
M←S 800T-24HR5KL8AX 800H-24HRR5KL8AX
No Lamp 0…250V AC/DC No Knob M M 800T-25HXN2KB6AX 800H-25HRXN2KB6AX
Universal LED 12…130V AC/DC Red M M 800T-2HRH2KB6AX 800H-2HRRH2KB6AX
S→M‡  800T-2HRH4KL8AX 800H-2HRRH4KL8AX
M←S 800T-2HRH5KL8AX 800H-2HRRH5KL8AX
Transformer Incandescent 120V AC 50/60 Hz Red X
O
O
X
M M 800T-16HR2KB6AX 800H-16HRR2KB6AX
S→M‡  800T-16HR4KL8AX 800H-16HRR4KL8AX
M←S 800T-16HR5KL8AX 800H-16HRR5KL8AX
LED M M 800T-16HRH2KB6AX 800H-16HRRH2KB6AX
S→M‡  800T-16HRH4KL8AX 800H-16HRRH4KL8AX
M←S 800T-16HRH5KL8AX 800H-16HRRH5KL8AX
No Lamp 120V AC 50/60 Hz No Knob M M 800T-16HXN2KB6AX 800H-16HRXN2KB6AX
  
Note: X = Closed/O = Open
⋆ Operator only supplied without power module, lamp, lens cap, or contact blocks. ‡ Target tables are reversed from those shown.

                                                   1st Level    2nd Level
800 T       16    H    R          2    KB6    A    X
   a    b    c    d    e    f    g    h    i    j

Click to enlarge - 800T_800H-1_15-5


a    b    c    d
Protection Rating Finger-Safe Guards Power Module Type and Voltage No. of Positions
Full Voltage — Incandescent Bul. 800T
Type 4/13
Description Bul. 800H
Type 4/4X/13
Code Description Code Description Code Description Code Code
T Metal, Type 4/13 Blank No guards 12 12V AC/DC H 2-position HR
H Plastic, Type 4/4X/13 C Guards on terminals 24 24V AC/DC  
    48 48V AC/DC
Universal — LED
2 12…130V AC/DC
Transformer
16 120V AC 50/60 Hz
26 240V AC 50/60 Hz
For other voltages, please contact your local Rockwell Automation sales office or Allen‑Bradley distributor.

e    f    g    h
Knob Color Illumination Options Operator Function and Knob Type Cam Options
Standard Knob or No Knob 2-Position
Code Color Code Description Code Operator Function Code Operator Function
A Amber Blank Incandescent 2 Maintained KB6 Maintained cam
B Blue H LED 4 Spring return from left KL8 Spring return cam
C Clear   5 Spring return from right  
G Green Knob Lever
R Red 17 Maintained
W White 18 Spring return from left
X No knob 19 Spring return from right

i, j
Contact Blocks∆ 
Code Description
Blank (both pos.) No contacts
Standard
D 1 N.O.
E 1 N.C.
A 1 N.O. - 1 N.C.
X No contacts in this position
PenTUFF (Low Voltage)
H 1 N.O.
U 1 N.C.
F 1 N.O. - 1 N.C.
Class 1, Div. 2
Logic Reed
V 1 N.O.
W 1 N.C.
T 1 N.O. - 1 N.C.
Sealed Switch
R 1 N.O.
S 1 N.C.
P 1 N.O. - 1 N.C.
Stackable Sealed Switch
5 1 N.O.
6 1 N.C.
7 1 N.O. - 1 N.C.

Table 1.  Selector Switch Cam Targets

Cam Description (2-Position)
Target Contact Block Code♠ 
Click to enlarge - 800T_800H-1_9-4 Click to enlarge - 800T_800H-1_9-5
O X D, H, V, R, 5
X O E, U, W, S, 6

X = Closed/O = Open


Table 2.  Contact Block Code Reduction Rules

Contact Block Substitution
Combination Code
Standard
D + E A
D + D M
E + E N

∆ Contact blocks used on white side only.
♠ Target tables are reversed for spring return from left operators.


3-Position Knob/Lever Type Selector Switch Devices, Illuminated

Click to enlarge - 800T_800H-1_16-1      Click to enlarge - 10_64_800h_sw
Standard Knob Operator
Cat. No. 800T-16JR2KB7AX
     Standard Knob Operator
Cat. No. 800H-16JRR2KB7AX

Type Lamp Type Volts Color Operator Position M = Maintained
S = Spring Return
Type 4/13 Type 4/4X/13
Click to enlarge - 800T_800H-1_9-4 Click to enlarge - 800T_800H-1_11-5 Click to enlarge - 800T_800H-1_9-5 Standard Knob Standard Lever
Cat. No. Cat. No.
Operator Only⋆  No Contacts M M M 800T-00JX2KB7
Full Voltage Incandescent 24V AC/DC Red X
O
O
O
O
X
M M M 800T-24JR2KB7AX 800H-24JRR2KB7AX
S→M M 800T-24JR4KB7AX 800H-24JRR4KB7AX
M M←S 800T-24JR5KB7AX 800H-24JRR5KB7AX
No Lamp 0…250V AC/DC No Knob M M M 800T-25JXN2KB7AX
Universal LED 12…130V AC/DC Red M M M 800T-2JRH2KB7AX 800H-2JRRH2KB7AX
S→M M 800T-2JRH4KB7AX 800H-2JRRH4KB7AX
M M←S 800T-2JRH5KB7AX 800H-2JRRH5KB7AX
Transformer Incandescent 120V AC 50/60 Hz Red X
O
O
O
O
X
M M M 800T-16JR2KB7AX 800H-16JRR2KB7AX
S→M M 800T-16JR4KB7AX 800H-16JRR4KB7AX
M M←S 800T-16JR5KB7AX 800H-16JRR5KB7AX
LED M M M 800T-16JRH2KB7AX 800H-16JRRH2KB7AX
S→M M 800T-16JRH4KB7AX 800H-16JRRH4KB7AX
M M←S 800T-16JRH5KB7AX 800H-16JRRH5KB7AX
No Lamp No Knob M M M 800T-16JXN2KB7AX
  
Note: X = Closed/O = Open
⋆ Operator only supplied without power module, lamp, lens cap, or contact blocks.

   1st Level    2nd Level
800 T       16    J    R          2    KB7    A    X
   a    b    c    d    e    f    g    h    i    j

Click to enlarge - 800T_800H-1_15-5


a    b    c    d
Protection Rating Finger-Safe Guards Power Module Type and Voltage No. of Positions
Full Voltage — Incandescent 800T
Type 4/13
Description 800H
Type 4/4X/13
Code Description Code Description Code Description Code Code
T Metal, Type 4/13 Blank No guards 12 12V AC/DC J 3-position JR
H Plastic, Type 4/4X/13 C Guards on terminals 24 24V AC/DC  
    48 48V AC/DC
Universal — LED
2 12…130V AC/DC
Transformer
16 120V AC 50/60 Hz
26 240V AC 50/60 Hz
For other voltages, please contact your local Rockwell Automation sales office or Allen‑Bradley distributor.

e    f    g    h
Knob Color Illumination Options Operator Function and Knob Type Cam Options
Standard Knob or No Knob 3-Position
Code Color Code Description Code Operator Function Code Operator Function
A Amber Blank Incandescent 2 Maintained KB7 B7 cam
B Blue H LED§  4 Spring return from left KC1 C1 cam
C Clear   5 Spring return from right KC7 C7 cam
G Green 91 Spring return from both KE7 E7 cam
R Red Knob Lever KQ1 Q1 cam
W White Code Operator Function KT1 T1 cam
X No knob 17 Maintained  
  18 Spring return from left
19 Spring return from right
20 Spring return from both

i, j
Contact Blocks♣ 
Code Description
Blank (both pos.) No contacts
Standard
A 1 N.O. - 1 N.C.
X No contacts in this position
PenTUFF (Low Voltage)
F 1 N.O. - 1 N.C.
Class 1, Div. 2
Logic Reed
T 1 N.O. - 1 N.C.
Sealed Switch
P 1 N.O. - 1 N.C.
Stackable Sealed Switch
7 1 N.O. - 1 N.C.

Table 1. Selector Switch Cam Targets

Target Cam Description (3-Position)
Click to enlarge - 800T_800H-1_9-4 Click to enlarge - 800T_800H-1_11-5 Click to enlarge - 800T_800H-1_9-5 KB7 KC1 KC7 KE7 KQ1 KT1
X O O D, H, V, R, 5 D, H, V, R, 5 D, H, V E, U, W, S, 6
O X O E, U, W, S, 6 E, U, W, S, 6 E, U, W, S, 6
O O X E, U, W, S, 6 D, H, V, R, 5 D, H, V, R, 5
X X O G, I J, Q J, Q
O X X J,Q J,Q E, U, W, S, 6
X O X G,I G,I D, H, V, R, 5

‡ LED only.
§ LEDs available in red, green, amber, blue, and white. White LEDs only available in 6V, 24V, 120V, and 130V full voltage and all transformer units. LED color matches lens color, except clear lens supplied with white LED and white lens supplied with amber LED. All LEDs except 120V have an internal shunt resistor for use with solid-state outputs.
♣ Contact blocks used on white side only.


Pilot Light Devices

Click to enlarge - 800T_800H-1_17-1      Click to enlarge - 800T_800H-1_17-2
Transformer Type Pilot Light
Cat. No. 800T-P16R
     Push-to-Test Pilot Light
Cat. No. 800T-PT16R

Type Lamp Type Volts Color Type 4/13 Type 4/4X/13
Pilot Light Push-to-Test⋆  Pilot Light Push-to-Test⋆ 
Cat. No. Cat. No. Cat. No. Cat. No.
Operator Only‡  800T-S00 800T-SB00XX 800H-SR00 800H-SRB00XX
Full Voltage§  Incandescent 24V AC/DC Red 800T-Q24R 800T-QT24R 800H-QR24R 800H-QRT24R
Green 800T-Q24G 800T-QT24G 800H-QR24G 800H-QRT24G
Amber 800T-Q24A 800T-QT24A 800H-QR24A 800H-QRT24A
No Lamp 0…250V AC/DC No Lens 800T-QN25 800T-QTN25
Universal§  LED 12…130 V AC/DC Red 800T-QH2R 800T-QTH2R 800H-QRH2R 800H-QRTH2R
Green 800T-QH2G 800T-QTH2G 800H-QRH2G 800H-QRTH2G
Amber 800T-QH2A 800T-QTH2A 800H-QRH2A 800H-QRTH2A
Transformer§  Incandescent 120V AC,
50/60 Hz
Red 800T-P16R 800T-PT16R 800H-PR16R 800H-PRT16R
Green 800T-P16G 800T-PT16G 800H-PR16G 800H-PRT16G
Amber 800T-P16A 800T-PT16A 800H-PR16A 800H-PRT16A
LED Red 800T-PH16R 800T-PTH16R 800H-PRH16R 800H-PRTH16R
Green 800T-PH16G 800T-PTH16G 800H-PRH16G 800H-PRTH16G
Amber 800T-PH16A 800T-PTH16A 800H-PRH16A 800H-PRTH16A
No Lamp No Lens 800T-PN16 800T-PTN16
  
⋆ Includes one standard Cat. No. 800T-XA (1 N.O. - 1 N.C.) contact block. For typical pilot light wiring diagrams, see Typical Pilot Light Wiring Diagrams.
‡ Operator only supplied without power module, lamp, lens cap, or contact blocks.
§ All pilot lights except push-to-test without sealed contacts and dual input transformer relay, are rated for Class 1, Division 2 applications.

  (Push-to-Test)
800 T       P    T          16    G    AR
   a    b    c    d    e    f    g    h

Click to enlarge - 800T_800H-1_17-5


a    b    c    d
Protection Rating Finger-Safe Guards Power Module Type Lamp Test Options
Bul. 800T
Type 4/13
Description Bul. 800H
Type 4/4X/13
Code Description Code Description Code Code Code Description
T Metal, Type 4/13 Blank No guards P Transformer
(or dual input)
PR Blank No test option▶ 
H Plastic, Type 4/4X/13 C Guards on terminals Q Full voltage/Universal QR T Push-to-test
      D Dual input — diode∆ ♠ 
DT Dual input — transformer relay♠ 
Note: Push-to-test supplied with factory jumpered contact block.

e    f
Illumination Options Voltage
Transformer
Code Description Code Description
Blank Incandescent 16 120V AC 50/60 Hz
H LED♣  26 240V AC 50/60 Hz
  46 480V AC 50/60 Hz
56 600V AC 50/60 Hz
Full Voltage — Incandescent
12 12V AC/DC
24 24V AC/DC
48 48V AC/DC
10 120V AC/DC
20 240V AC/DC
Universal — LED
2 12…130V AC/DC
Dual Input
16 120V AC
24 24V AC/DC
(Dual input diode only)

g    h
Lens Color Contact Blocks
(Push-to-test units only)
Code Color Glass Code#  Code Description
Blank No lens Blank Standard
A Amber D Blank 1 N.O. - 1 N.C.
B Blue E PenTUFF (Low Voltage)
C Clear F AV 1 N.O. - 1 N.C.
G Green H Class 1, Div. 2
R Red J Logic Reed
W White K AR 1 N.O. - 1 N.C.
  Sealed Switch
AP 1 N.O. - 1 N.C.
Stackable Sealed Switch
AY 1 N.O. - 1 N.C.

▶ Non-push-to-test pilot lights using the universal LED option cannot be ordered as Bul. 800HC or 800TC. The terminals are finger-safe as standard.
∆ Diode type dual input provides circuit isolation via opposing diodes. Not recommended for use with solid-state outputs.
♠ Dual input devices (diode or transformer type) cannot be ordered as Bul. 800HC or 800TC. Finger-safe terminal guards are not available.
♣ LED illumination option is not available with diode type dual input.
# Glass lens available on 800T pilot lights only. Not available on push-to-test units.


Emergency Stop Devices

2-Position Push-Pull and Push-Pull/Twist Release Devices, Non-Illuminated

Note: A jumbo or large legend plate is recommended, if space allows.

Click to enlarge - 800T_800H-1_4-1      Click to enlarge - 800TC-FXLE6D4S_GS      Click to enlarge - 800T_800H-1_4-2      Click to enlarge - 800T_800H-1_4-3
2-Position Push-Pull
Cat. No. 800T-FX6D4
     2-Position Metal Push-Pull
Cat. No. 800TC-FXLE6D4S
     2-Position Push-Pull / Twist
Cat. No. 800T-FXT6D4
     2-Position Push-Pull / Twist
Cat. No. 800H-FRXT6D4

Contact Type Operator Position Type 4/13 Type 4/4X/13
Click to enlarge - 800T_800H-1_4-4 Click to enlarge - 800T_800H-1_4-5 Push-Pull —
40 mm
Push-Pull —
63 mm Metal
Push-Pull/Twist
Release
Push-Pull/Twist
Release
Out In Cat. No. Cat. No. Cat. No. Cat. No.
Click to enlarge - 800T_800H-1_3-9 N.C.L.B. ⋆  X O 800T-FX6D4 800T-FXLE6D4 800T-FXT6D4 800H-FRXT6D4
Click to enlarge - 800T_800H-1_3-4 N.O. - N.C.L.B. ⋆  O
X
X
O
800T-FX6A1 800T-FXLE6A1 800T-FXT6A1 800H-FRXT6A1
Click to enlarge - 800T_800H-1_4-8 N.C.L.B. - N.C.L.B. ⋆  X
X
O
O
800T-FX6A5 800T-FXLE6A5 800T-FXT6A5 800H-FRXT6A5
Click to enlarge - 800T_800H-1_4-9 S.M.C.B. ⋆ ‡  X O 800TC-FX6D4S 800TC-FXLE6D4S 800TC-FXT6D4S 800HC-FRXT6D4S
Click to enlarge - 800t_800H-1_4-10 N.O. - S.M.C.B. ⋆ ‡  O
X
X
O
800TC-FX6A1S 800TC-FXLE6A1S 800TC-FXT6A1S 800HC-FRXT6A1S
Click to enlarge - 800t_800h-1_4-11 S.M.C.B. - S.M.C.B ⋆ ‡  X
X
O
O
800TC-FX6A5S 800TC-FXLE6A5S 800TC-FXT6A5S 800HC-FRXT6A5S
  
Note:X = Closed/O = Open
Note:Emergency stop push buttons are compliant with EN ISO 13850 and EN/IEC 60947-5-5 Standards when using N.C.L.B. contact blocks.
⋆ Normally closed late break contact. When button is pushed from the OUT to IN position, the mechanical detent action of the operator occurs before electrical contacts change state. When the button is pulled from the IN to the OUT position, the electrical contacts change state before the mechanical detent occurs.
‡ The Self Monitoring Contact Block (S.M.C.B.) is composed of a N.C.L.B. contact wired in series with a N.O. monitoring contact. The N.O. monitoring contact automatically closes when the S.M.C.B. is properly installed onto the E-stop operator. If the S.M.C.B. is separated from the E-stop operator, the N.O. monitoring contact will automatically open.

800 T       FX    1    A1
   a    b    c    d    e

Click to enlarge - 800T_800H-1_18-9


a    b    c
Protection Rating Finger-Safe Guards Head Type § 
Bul. 800T
Type 4/13
Description Bul. 800H
Type 4/4X/13
Code Description Code Description Code Code
T Metal, Type 4/13 Blank No guards FX Mushroom head (push-pull)
H Plastic, Type 4/4X/13 C Guards on terminals FXC 90 mm anodized aluminum head (push‑pull)
    FXJ Jumbo mushroom head (push‑pull)
FXJE Jumbo mushroom head (push-pull) with "E‑Stop"
FXL 63 mm anodized aluminum head (push-pull)
FXLE 63 mm anodized aluminum head (push-pull) with "E‑Stop"
FXT Push-pull/twist-to-release FRXT
FXJT Jumbo head push-pull with twist-to-release FRXJT

d    e    e (cont'd)
Color Cap Contact Block(s) Contact Block(s)
Code Color Code Operator Position Description Code Operator Position Description
Blank No cap ♣  Click to enlarge - 800T_800H-1_4-4 Click to enlarge - 800T_800H-1_4-5 Click to enlarge - 800T_800H-1_4-4 Click to enlarge - 800T_800H-1_4-5
1 Green Out In Out In
2 Black Blank No contacts on operator Blank No contacts
3 Orange Standard PenTUFF (Low Voltage)
4 Gray D1 O X 1 N.O. D1V O X 1 N.O.
5 White D2 X O 1 N.C. D2V X O 1 N.C.
6 Red D4 X O 1 N.C.L.B. D4V X O 1 N.C.L.B.
7 Blue A O
X
X
O
1 N.O. - 1 N.C. AV O
X
X
O
1 N.O. - 1 N.C.
9 Yellow A1 O
X
X
O
1 N.O. - 1 N.C.L.B. Class 1, Div. 2
  A5 X
X
O
O
2 N.C.L.B. ▶  Logic Reed
  D1R O X 1 N.O.
D2R X O 1 N.C.
AR O
X
X
O
1 N.O. - 1 N.C.
Sealed Switch
D1P O X 1 N.O.
D2P X O 1 N.C.
AP O
X
X
O
1 N.O.
1 N.C.
Stackable Sealed Switch
D1Y O X 1 N.O.
D2Y X O 1 N.C.
AY O
X
X
O
1 N.O. - 1 N.C.
Note: X = Closed/O = Open

Note:X = Closed/O = Open
⋆ Normally closed late break contact. When button is pushed from the OUT to IN position, the mechanical detent action of the operator occurs before electrical contacts change state. When the button is pulled from the IN in the OUT position, the electrical contacts change state before the mechanical detent occurs.
§ Devices with N.C.L.B. contacts meet EN ISO 13850 and IEC 60947-5-5 standards for emergency stop applications.
♣ Not valid with head Type J or JT.
▶ Two 800T-XD4 contact blocks supplied.


3-Position Push-Pull Devices, Non-Illuminated

Note: A jumbo or large legend plate is recommended, if space allows.

Click to enlarge - 800T_800H-1_19-1      Click to enlarge - 800T_800H-1_19-2
3-Position Push-Pull
Cat. No. 800T-FXM6A7
     3-Position Push-Pull
Cat. No. 800H-FRXM6A7

Contact Type Operator Position Operator Position
Click to enlarge - 800T_800H-1_4-4 Click to enlarge - 800T_800H-1_19-6 Click to enlarge - 800T_800H-1_4-5 Click to enlarge - 800T_800H-1_4-4 Click to enlarge - 800T_800H-1_19-6 Click to enlarge - 800T_800H-1_4-5
Momentary Maintained Maintained Momentary Maintained Momentary
Out Center In Out Center In
N.C.-
N.C.L.B. ⋆ 
X
X
O
X
O
O
X
X
O
X
O
O
  

Button Color Type 4/13 Type 4/4X/13 Type 4/13 Type 4/4X/13
Push-Pull Push-Pull Push-Pull Push-Pull
Cat. No. Cat. No. Cat. No. Cat. No.
Red 800T-FXM6A7 800H-FRXM6A7 800T-FXN6A7 800H-FRXN6A7
  
Note: X = Closed/O = Open
⋆ Normally closed late break contact. When button is pushed from the OUT to IN position, the mechanical detent action of the operator occurs before electrical contacts change state. When the button is pulled from the IN to the OUT position, the electrical contacts change state before the mechanical detent occurs.

800 T       FX    M    1    A7
   a    b    c    d    e    f

Click to enlarge - 800T_800H-1_19-12


a    b    c    d
Protection Rating Finger-Safe Guards Head Type Operator Function
Bul. 800T
Type 4/13
Description Bul. 800H
Type 4/4X/13
Code Operator Position
Code Description Code Description Code Code Click to enlarge - 800T_800H-1_4-4 Click to enlarge - 800T_800H-1_19-6 Click to enlarge - 800T_800H-1_4-5
T Metal, Type 4/13 Blank No guards FX Mushroom head (push-pull) FRX Out Center In
H Plastic, Type 4/4X/13 C Guards on terminals FXC 90 mm anodized aluminum head (push-pull) M Momentary Maintained Maintained
    FXJ Jumbo mushroom head (push‑pull) FRXJ N Momentary Maintained Momentary
FXL 63 mm anodized aluminum head (push-pull)  

e    f    f (cont'd)
Color Cap Contact Block(s) Contact Block(s)
Code Color Code Operator Position Description Code Operator Position Description
Blank No cap §  Click to enlarge - 800T_800H-1_4-4 Click to enlarge - 800T_800H-1_19-6 Click to enlarge - 800T_800H-1_4-5 Click to enlarge - 800T_800H-1_4-4 Click to enlarge - 800T_800H-1_19-6 Click to enlarge - 800T_800H-1_4-5
1 Green Out Ctr. In Out Ctr. In
2 Black Blank No contacts Class 1, Div. 2
3 Orange Standard Logic Reed
4 Gray A O
X
O
O
X
O
1 N.O. - 1 N.C. AR O
X
O
O
X
O
1 N.O. - 1 N.C.
5 White A1 O
X
O
X
X
O
1 N.O. - 1 N.C.L.B. Sealed Switch
6 Red A7 X
X
O
X
O
O
1 N.C. -
1 N.C.L.B.
AP O
X
O
O
X
O
1 N.O. - 1 N.C.
7 Blue B6 X
X
X
X
O
X
O
X
O
O
O
O
2 N.C. -
2 N.C.L.B.
Stackable Sealed Switch
9 Yellow PenTUFF (Low Voltage) AY O
X
O
O
X
O
1 N.O. - 1 N.C.
  AV O
X
O
O
X
O
1 N.O. -
1 N.C.
 
Note: X = Closed/O = Open

Note:X = Closed/O = Open
§ Not valid with head Type J.


2-Position Push-Pull and Push-Pull/Twist Release Devices, Illuminated

Note: A jumbo or large legend plate is recommended, if space allows.


Click to enlarge - 800T_800H-1_5-1      Click to enlarge - 800T-FXJEP16RA1_GS      Click to enlarge - 800T_800H-1_5-2      Click to enlarge - 800T_800H-1_5-3
Illuminated 2-Position Push‑Pull
Cat. No. 800T‑FXP16RA1
     2-Position Push‑Pull
Cat. No. 800T‑FXJEP16RA1
     Illuminated 2-Position Push‑Pull/Twist
Cat. No. 800T‑FXTP16RA1
     Illuminated 2-Position Push‑Pull/Twist
Cat. No. 800H‑FRXTP16RA1

Type Lamp Type Volts Color Contacts Operator Position Type 4/13 Type 4/4X/13
Click to enlarge - 800T_800H-1_4-4 Click to enlarge - 800T_800H-1_4-5 Push-Pull —
40 mm & 
Push-Pull —
60 mm with "E‑Stop" & 
Push-Pull/Twist
Release & 
Push-Pull/Twist
Release & 
Maintained
Out In Cat. No. Cat. No. Cat. No. Cat. No.
Operator Only ⋆  No Contacts 800T-FXS00X 800T-FXTS00X 800H-FRXTS00X
Full Voltage Incan. 24V AC/DC Red N.O. -
N.C.L.B. ‡ 
O
X
X
O
800T-FXQ24RA1 800T-FXJEQ24RA1 800T-FXTQ24RA1 800H-FRXTQ24RA1
No Lamp 0…250V AC/DC No Lens 800T-FXQN25XA1 800T-FXTQN25XA1 800H-FRXTQN25XA1
Universal LED 12…130V AC/DC Red 800T-FXQH2RA1 800T-FXJEQH2RA1 800T-FXTQH2RA1 800H-FRXTQH2RA1
Transformer Incan. 120V AC Red N.O. -
N.C.L.B. ‡ 
O
X
X
O
800T-FXP16RA1 800T-FXJEP16RA1 800T-FXTP16RA1 800H-FRXTP16RA1
240V AC 800T-FXP26RA1 800T-FXJEP26RA1 800T-FXTP26RA1 800H-FRXTP26RA1
LED 120V AC 800T-FXPH16RA1 800T-FXJEPH16RA1 800T-FXTPH16RA1 800H-FRXTPH16RA1
240V AC 800T-FXPH26RA1 800T-FXJEPH26RA1 800T-FXTPH26RA1 800H-FRXTPH26RA1
Transformer No Lamp 120V AC No Lens 800T-FXPN16XA1 800T-FXTPN16XA1 800H-FRXTPN16XA1
  
Note:X = Closed/O = Open
Note:Emergency stop push buttons are compliant with EN ISO 13850 and EN/IEC 60947-5-5 Standards when using N.C.L.B. contact blocks.
⋆ Operator only supplied without power module, lamp, lens cap, or contact blocks.
‡ Normally closed late break contact. When button is pushed from the OUT to IN position, the mechanical detent action of the operator occurs before electrical contacts change state. When the button is pulled from the IN to the OUT position, the electrical contacts change state before the mechanical detent occurs.
& Consult your local Rockwell Automation sales office or Allen-Bradley distributor for availability of illuminated E-stops with Self Monitoring Contact Blocks (SMCBs).

800 T       FX    T    PH    16    R    A1
   a    b    c    d    e    f    g    h

Click to enlarge - 800T_800H-1_19-11


a    b    c    d
Protection Rating Finger-Safe Guards Head Type ♣  Operator Function
Bul. 800T
Type 4/13
Description Bul. 800H
Type 4/4X/13
Code Description Code Description Code Code Code Description
T Metal, Type 4/13 Blank No guards FX Mushroom head FRX Blank Push-pull # 
H Plastic, Type 4/4X/13 C Guards on terminals FXJ Jumbo mushroom FRXJ T Push-pull/twist
    FXJE Jumbo mushroom (push‑pull) with "E‑Stop"  

e    f    g
Illumination Options Voltage §  Color Cap
Transformer Transformer
Code Description Code Description Code Color
P Incandescent 16 120V AC 50/60 Hz X No cap
(not valid with head Type J)
PH LED 26 240V AC 50/60 Hz A Amber
Full Voltage Full Voltage B Blue
Q Incandescent 24 24V AC/DC C Clear
QH Universal LED 10 120V AC/DC G Green
Dual Input 20 240V AC/DC R Red
D Diode type ♠  Universal LED W White
DT Transformer — relay type 2 12…130V AC/DC  
DTH Transformer — relay type LED Dual Input
  16 120V AC
24 24V AC/DC
(dual input diode only)

h    h (cont'd)
Target Target
Contact Click to enlarge - 800T_800H-1_4-4 Click to enlarge - 800T_800H-1_4-5 Contact Click to enlarge - 800T_800H-1_4-4 Click to enlarge - 800T_800H-1_4-5
N.O. O X N.O. O X
N.C./
N.C.L.B.
X O N.C./
N.C.L.B.
X O
Contact Blocks Contact Blocks
Code Description Code Description
Blank No contacts Sealed Switch
Standard D1P 1 N.O.
D1 1 N.O. D2P 1 N.C.
D2 1 N.C. AP 1 N.O. - 1 N.C.
D4 1 N.C.L.B. Stackable Sealed Switch
A 1 N.O. - 1 N.C. D1Y 1 N.O.
A1 1 N.O. - 1 N.C.L.B. D2Y 1 N.C.
A5 2 N.C.L.B. ▶  AY 1 N.O. - 1 N.C.
PenTUFF (Low Voltage)  
D1V 1 N.O.
D2V 1 N.C.
D4V 1 N.C.L.B.
AV 1 N.O. - 1 N.C.
Class 1, Div. 2
Logic Reed
D1R 1 N.O.
D2R 1 N.C.
AR 1 N.O. - 1 N.C.

§ See Pilot Light Devices (Table f) for additional voltage code options.
♣ Devices with N.C.L.B. contacts meet EN ISO 13850 and IEC 60947-5-5 standards for emergency stop applications.
# Push-Pull is available only with Bul. 800T.
♠ Diode type dual input provides circuit isolation via opposing diodes. Not recommended for use with solid-state outputs.
▶ Two stacked 800T-XD4 contact blocks supplied.


3-Position Push-Pull Devices, Illuminated

Click to enlarge - 800T_800H-1_21-1      Click to enlarge - 800T_800H-1_21-2
Illuminated 3-Position Push-Pull
Cat. No. 800T-FXMP16RA7
     Illuminated 3-Position Push-Pull
Cat. No. 800H-FRXMP16A7

  Operator Position Operator Position
Click to enlarge - 800T_800H-1_4-4 Click to enlarge - 800T_800H-1_19-6 Click to enlarge - 800T_800H-1_4-5 Click to enlarge - 800T_800H-1_4-4 Click to enlarge - 800T_800H-1_19-6 Click to enlarge - 800T_800H-1_4-5
Momentary Maintained Maintained Momentary Maintained Momentary
Contacts Out Center In Out Center In
N.C.-
N.C.L.B. ⋆ 
X
X
O
X
O
O
X
X
O
X
O
O
  

Type Lamp Type Volts Color Type 4/13 Type 4/4X/13 Type 4/13 Type 4/4X/13
Cat. No. Cat. No. Cat. No. Cat. No.
Operator Only ‡  800T-FXMS00X 800H-FRXMS00X 800T-FXNS00X 800H-FRXNS00X
Full Voltage Incandescent 24V AC/DC Red 800T-FXMQ24RA7 800H-FRXMQ24RA7 800T-FXNQ24RA7 800H-FRXNQ24RA7
No Lamp 0…250V AC/DC No Lens 800T-FXMQN25XA7 800H-FRXMQN25XA7 800T-FXNQN25XA7 800H-FRXNQN25XA7
Universal LED 12…130V AC/DC Red 800T-FXMQH2RA7 800H-FRXMQH2RA7 800T-FXNQH2RA7 800H-FRXNQH2RA7
Transformer Incandescent 120V AC Red 800T-FXMP16RA7 800H-FRXMP16RA7 800T-FXNP16RA7 800H-FRXNP16RA7
LED 120V AC 800T-FXMPH16RA7 800H-FRXMPH16RA7 800T-FXNPH16RA7 800H-FRXNPH16RA7
No Lamp 120V AC No Lens 800T-FXMPN16XA7 800H-FRXMPN16XA7 800T-FXNPN16XA7 800H-FRXNPN16XA7
  
Note: X = Closed/O = Open
⋆ Normally closed late break contact. When button is pushed from the OUT to IN position, the mechanical detent action of the operator occurs before electrical contacts change state. When the button is pulled from the IN to the OUT position, the electrical contacts change state before the mechanical detent occurs.
‡ Operator only supplied without power module, lamp, lens cap, or contact blocks.

800 T       FX    M    PH    16    R    A1
   a    b    c    d    e    f    g    h

Click to enlarge - 800T_800H-1_19-11


a    b    c    d
Protection Rating Finger-Safe Guards Head Type Operator Function
Bul. 800T
Type 4/13
Description Bul. 800H
Type 4/4X/13
Code Operator Position
Click to enlarge - 800T_800H-1_4-4 Click to enlarge - 800T_800H-1_19-6 Click to enlarge - 800T_800H-1_4-5
Code Description Code Description Code Code Out Ctr. In
T Metal, Type 4/13 Blank No guards FX Mushroom head FRX M Mom. Main. Main.
H Plastic, Type 4/4X/13 C Guards on terminals FXJ Jumbo mushroom FRXJ N Mom. Main. Mom.
      Mom. – Momentary, Main. – Maintained.

e    f    g    h
Illumination Options Voltage ♣  Color Cap Target
Transformer Transformer Contact Click to enlarge - 800T_800H-1_4-4 Click to enlarge - 800T_800H-1_19-6 Click to enlarge - 800T_800H-1_4-5
Code Description Code Description Code Color N.O. O O X
P Incandescent 16 120V AC 50/60 Hz X No cap
(not valid with head Type J)
N.C. X O O
PH LED 26 240V AC 50/60 Hz A Amber N.C.L.B. X X O
Full Voltage Full Voltage B Blue Contact Blocks
Q Incandescent 24 24V AC/DC C Clear Code Description
QH Universal LED 10 120V AC/DC G Green Blank No contacts on operator
Dual Input 20 240V AC/DC R Red Standard
D Diode type ♠  Universal LED W White A 1 N.O. - 1 N.C.
DT Transformer — relay type 2 12…130V AC/DC   A1 1 N.O. - 1 N.C.L.B.
DTH Transformer — relay LED Dual Input A7 1 N.C. - 1 N.C.L.B.
  16 120V AC PenTUFF (Low Voltage)
24 24V AC/DC #  AV 1 N.O. - 1 N.C.
  Class 1, Div. 2
Logic Reed
AR 1 N.O. - 1 N.C.
Sealed Switch
AP 1 N.O. - 1 N.C.
Stackable Sealed Switch
AY 1 N.O. - 1 N.C.

♣ See Pilot Light Devices (Table f) for additional voltage code options.
♠ Diode type dual input provides circuit isolation via opposing diodes. Not recommended for use with solid-state outputs and neon indicators.
# Dual input diode only.


Specialty Devices

Potentiometer Devices⋆ ‡ 

Click to enlarge - 800T_800H-1_22-1      Click to enlarge - 800T_800H-1_22-2
Cat. No. 800T-U24      Cat. No. 800H-UR4

Resistance Type 4/13 Type 4/4X/13 Resistance Type 4/13 Type 4/4X/13
Potentiometer§  Potentiometer§  Potentiometer§  Potentiometer§ 
Cat. No. Cat. No. Cat. No. Cat. No.
Operator Only without Resistive Element 800T-N37♣  800H-N102♣  25 kW 800T-U37 800H-UR37
50 kW 800T-U41 800H-UR41
150 W 800T-U4 800H-UR4 75 kW 800T-U46 800H-UR46
500 W 800T-U12 800H-UR12 100 kW 800T-U49 800H-UR49
1000 W 800T-U13 800H-UR13 150 kW 800T-U50 800H-UR50
1500 W 800T-U16 800H-UR16 400 kW 800T-U54 800H-UR54
2500 W 800T-U19 800H-UR19 500 kW 800T-U55 800H-UR55
5000 W 800T-U24 800H-UR24 1 MW 800T-U57 800H-UR57
10 kW 800T-U29 800H-UR29 2 MW 800T-U59 800H-UR59
15 kW 800T-U34 800H-UR34 3 MW 800T-U62 800H-UR62
20 kW 800T-U35 800H-UR35 4 MW 800T-U64 800H-UR64
  
⋆ Single turn operation with 312° rotation.
‡ Does not meet Class 1 Div. 2 applications.
§ Rated for 300V AC/DC, 2 W maximum (6V DC minimum). Specify Bulletin 800TC or 800HC for finger-safe potentiometers. Example: Cat. No. 800T-U29 becomes Cat. No. 800TC-U29.
♣ For use with Type J potentiometers having a shaft length of 7/8 in. (22.2 mm) and a shaft diameter of 1/4 in. (6.3 mm).

Mechanically Interlocked Maintained Push Button Devices

Click to enlarge - 800T_800H-1_22-3      Click to enlarge - 800T_800H-1_22-4      Click to enlarge - 800T_800H-1_22-5      Click to enlarge - 800T_800H-1_22-6
Cat. No. 800T-FA22A      Cat. No. 800T-FB16A      Cat. No. 800T-FC16F      Cat. No. 800H-CRA22A

Contact Arrangement Type 4/13 Type 4/4X/13
Button Position: Button Type/Color♦  Bootless∆ 
Contact Type Configuration/
Position
Upper: Flush/Black
Lower: Flush/Black
Upper: Flush/Green
Lower: Extended/
Red
Upper: Flush/Green
Lower: Mushroom/
Red
Upper: Flush/Green
Lower: Extended/
Red
Upper: Flush/Black
Lower: Flush/Black
Cat. No. Cat. No. Cat. No. Cat. No. Cat. No.
1 N.O. - 1 N.C. Click to enlarge - 800T_800H-1_22-7 800T-FA22A 800T-FB16A 800T-FC16A 800H-CRB16A 800H-CRA22A
2 N.O. - 2 N.C. Click to enlarge - 800T_800H-1_22-8 800T-FA22F 800T-FB16F 800T-FC16F 800H-CRB16F 800H-CRA22F
No Contact 800T-FA22 800T-FB16 800T-FC16 800H-CRB16 800H-CRA22
  
♦ Consult your local Rockwell Automation sales office or Allen‑Bradley distributor for other operator types and combinations.
∆ If booted operators are desired, refer to Protective Boots to order boots separately.

Cluster Pilot Light Devices (Bul. 800T Only)⋆ 

Click to enlarge - 800T_800H-1_23-1      Click to enlarge - 800T_800H-1_23-2
Color Cap Only With Lamps
Cat. No. 800T-N249
     Complete Unit
Cat. No. 800T-PC416

Type Lamp Type Volts Type 4/13
Color Cap With Lamps Complete Unit
Cat. No. Cat. No.
2-Light Color Cap with Lamps Incandescent 24V AC/DC Full Voltage 800T-N257 800T-QC224
Click to enlarge - 10_71_3 LED 24V AC/DC Full Voltage 800T-N257L 800T-QCL224
Incandescent 120V AC, 50/60 Hz Transformer 800T-N52 800T-PC216
LED 120V AC, 50/60 Hz Transformer 800T-N52L 800T-PCL216
3-Light Color Cap with Lamps Incandescent 24V AC/DC Full Voltage 800T-N254 800T-QC324
Click to enlarge - 10_71_4 LED 24V AC/DC Full Voltage 800T-N254L 800T-QCL324
Incandescent 120V AC, 50/60 Hz Transformer 800T-N51 800T-PC316
LED 120V AC, 50/60 Hz Transformer 800T-N51L 800T-PCL316
4-Light Color Cap with Lamps Incandescent 24V AC/DC Full Voltage 800T-N251 800T-QC424
Click to enlarge - 10_71_5 120V AC, 50/60 Hz Transformer 800T-N50 800T-PC416
  

800T    PC    3    16    W    R    X    R
   a    b    c    d    e    f    g    h
                           Position 1    Position 2    Position 3    Position 4

Click to enlarge - 800T_800H-1_23-6


a    b    c    d    e, f, g, h
Finger-Safe Guards Power Module Type Illumination Options and No. of Units Voltage Options Color Options
Incandescent Full Voltage
Code Description Code Description Code Description Code Description Code Color
Blank No guards QC Full voltage 2 2 unit cluster 06 6V AC/DC Blank
(All 4 Positions)
Standard unit♦ 
C Guards on terminals PC Transformer 3 3 unit cluster 12 12V AC/DC X No color
    4 4 unit cluster 24 24V AC/DC A Amber
LED‡ § ♣ ∆  Transformer B Blue
L2 2 unit cluster 16 120V AC, 50/60 Hz C Clear
L3 3 unit cluster   G Green
L4 4 unit cluster R Red
  W White

Custom Lens Caps for Cluster Pilot Lights

800T N249          R    G    A    W
      a    b    c    d    e    f
                  Position 1    Position 2    Position 3    Position 4

Click to enlarge - 800T_800H-1_23-7


a    b    c, d, e, f
No. of Lamps/Voltage Illumination Options
Transformer
Code Description Code Description Code Description
N50 4 lamps, 120V AC, 50/60 Hz Blank Incandescent Blank (All Positions) Standard unit♦ 
N51 3 lamps, 120V AC, 50/60 Hz L LED‡  A Amber
N52 2 lamps, 120V AC, 50/60 Hz   B Blue
N249 4 lamps, 6V AC/DC C Clear
N250 4 lamps, 12V AC/DC G Green
N251 4 lamps, 24V AC/DC R Red
N252 3 lamps, 6V AC/DC W White
N253 3 lamps, 12V AC/DC X No color
N254 3 lamps, 24V AC/DC  
N255 2 lamps, 6V AC/DC
N256 2 lamps, 12V AC/DC
N257 2 lamps, 24V AC/DC

⋆ Rated Type 4/13 indoor only.
‡ LEDs are available in red, green and amber only; lens color matches LED color. Exception: the white lens is supplied with an amber LED.
§ White lenses use amber LEDs.
♣ LEDs could be adversely affected when used with solid-state outputs.
∆ 6V and 12V are positive polarity. 24V LEDs are bipolar.
♦ See table above for standard unit colors.


1-, 2-, 3-, 4-Way Toggle Switches (Bul. 800T only)

Switch Type Lever Movement Handle Position Type 4/13
Spring Return Operation Maintained Operation
Click to enlarge - 800T_800H-1_24-2 Click to enlarge - 800T_800H-1_24-3 Click to enlarge - 800T_800H-1_24-4 Click to enlarge - 800T_800H-1_24-5 Click to enlarge - 800T_800H-1_24-6 Cat. No. Cat. No.
Up Left Center Right Down
2 Way Click to enlarge - 800T_800H-1_24-7 X O O 800T-T2H3EEXX 800T-T2H1EEXX
O O X
Click to enlarge - 800T_800H-1_24-8 X O O 800T-T2F3DDXX 800T-T2F1DDXX
O O X
4 Way Click to enlarge - 800T_800H-1_24-9 X O O O O 800T-T4T8AAXX 800T-T4R1AAXX
O X O O O
O O O X O
O O O O X
  
Note: X = Closed/O = Open

800T    T2    H2    E    E    X    X
   a    b    c    d    e    f    g
                     Right    Left    Right    Left

Click to enlarge - 800T_800H-1_24-10


a    b
Finger-Safe Guards Operator Type
Code Description Code Description
Blank No guards T1 1-way toggle
C Guards on terminals T2 2-way toggle
  T3 3-way toggle
T4 4-way toggle

c    c (cont'd)
Lever Movement and Function Lever Movement and Function
Type Function
Code
Description Type Function
Code
Description
M = Maintained
S = Spring Return
M = Maintained
S = Spring Return
1-
Way
A 1 M 3-
Way
Click to enlarge - 800T_800H-1_24-11 1 M M M
2 S 2 M M S
B 1 M 3 M S M
2 S 4 M S S
C 1 M 5 S M M
2 S 6 S S M
D 1 M 7 S M S
2 S 8 S S S
2-
Way
Click to enlarge - 800T_800H-1_24-14 1 M M Click to enlarge - 800T_800H-1_24-12 1 M M M
2 M S 2 M M S
3 S S 3 M S M
4 S M 4 M S S
Click to enlarge - 800T_800H-1_24-8 1 M M 5 S M M
2 M S 6 S S M
F 3 S S 7 S M S
4 S M 8 S S S
2-
Way
Click to enlarge - 800T_800H-1_24-17 1 M M 3-
Way
Click to enlarge - 800T_800H-1_24-13 1 M M M
2 M S 2 M M S
3 S S 3 M S M
4 S M 4 M S S
Click to enlarge - 800T_800H-1_24-7 H 1 M M 5 S M M
2 M S 6 S S M
3 S S 7 S M S
4 S M 8 S S S
2-
Way
Click to enlarge - 800T_800H-1_24-19 1 M M Click to enlarge - 800T_800H-1_24-15 1 M M M
2 M S 2 M M S
3 S S 3 M S M
4 S M 4 M S S
Click to enlarge - 800T_800H-1_24-21 1 M M 5 S M M
2 M S 6 S S M
3 S S 7 S M S
4 S M 8 S S S
  4-
Way
Click to enlarge - 800T_800H-1_24-9 1 M M M M
2 M M M S
3 M M S M
4 M M S S
5 M S M M
6 M S S M
7 M S M S
R 8 M S S S
Click to enlarge - 800T_800H-1_24-9 1 S M M M
2 S M M S
3 S M S M
4 S M S S
5 S S M M
6 S S S M
7 S S M S
T 8 S S S S

d, e, f, g    d, e, f, g (cont’d)
Contact Blocks Contact Blocks
Code Description Code Description
Blank (all pos.) No contacts Sealed Switch
Standard R 1 N.O.
D 1 N.O. S 1 N.C.
E 1 N.C. P 1 N.O. - 1 N.C.
G 1 N.O.E.M. Stackable Sealed Switch
J 1 N.C.L.B. 5 1 N.O.
A 1 N.O. - 1 N.C. 6 1 N.C.
X No contacts in this position 7 1 N.O. - 1 N.C.
PenTUFF (Low Voltage)  
H 1 N.O.
U 1 N.C.
I 1 N.O.E.M.
Q 1 N.C.L.B.
F 1 N.O. - 1 N.C.
Class 1, Div. 2
Logic Reed
V 1 N.O.
W 1 N.C.
T 1 N.O. - 1 N.C.

Table 1. Contact Block Code

Contact Block Substitution
Combination Code
Standard
D + E A
D + D ⋆  M
E + E N
J + D B
J + E C

Table 2. 1-2-3-4 Way Toggle Switch Cam Targets

Contact Configuration Suffix Code
Position Contact/Side
Up Left Center Right Down Right Side Left Side
O X O O O D, H, V, R, 5
O O O O X E, U, W, S, 6
X O X X X J, Q
X X X X O G, I
X O O O O E, U, W, S, 6
O O O X O D, H, V, R, 5
O X X X X G, I
X X X O X J, Q

Note:M = Maintained,
S = Spring Return
⋆ XA2 and XA2R contact blocks cannot be stacked upon, but they can stack on other contact blocks.


Selector Push Button Devices (Bul. 800T only)

Click to enlarge - 800T_800H-1_25-1
Selector Push Button
Cat. No. 800T-K2AAXX


Contact Type Button Color Button Type Contact
Position
Selector Sleeve Left Selector Sleeve Right Type 4/13
Selector Push Button
Button
Free
Button
Depressed
Button
Free
Button
Depressed
Cat. No.
Click to enlarge - 800T_800H-1_6-5 1 N.O. - 1 N.C. Black Flush Right O X O O 800T-KE2DEXX
Click to enlarge - 800T_800H-1_6-6 Left O O X O
Click to enlarge - 800T_800H-1_3-4 2 N.O. - 2 N.C. Black Flush Right O
O
X
O
O
X
X
O
800T-K2AAXX
Left O
O
X
O
O
X
X
O
Click to enlarge - 800T_800H-1_3-4 Black Flush Right O
X
X
O
O
X
O
X
800T-KC2AAXX
Left O
X
O
X
O
X
X
O
  
Note: X = Closed/O = Open

800T    KD    2    G    J    D    E
   a    b    c    d    e    f    g
                     Right    Left    Right    Left

Click to enlarge - 800T_800H-1_25-8


a    b    c
Finger-Safe Guards Cam and Head Type Color Cap
Code Description Code Description Code Color
Blank No guards K A cam with flush operator 1 Green
C Guards on terminals KA A cam with extended operator 2 Black
  KB B cam with flush operator 6 Red
KC C cam with flush operator  
KD D cam with flush operator
KE E cam with flush operator
Note: See Table 1 for Target description of each cam.

d, e, f, g    d, e, f, g (cont’d)
Contact Blocks Contact Blocks
Code Description Code Description
Blank (all pos.) No contacts on operator Class 1, Div. 2
Standard Logic Reed
D 1 N.O. V 1 N.O.
E 1 N.C. W 1 N.C.
G 1 N.O.E.M. T 1 N.O. - 1 N.C.
J 1 N.C.L.B. Sealed Switch
A 1 N.O. - 1 N.C. R 1 N.O.
X No contacts in this position S 1 N.C.
PenTUFF (Low Voltage) P 1 N.O. - 1 N.C.
H 1 N.O. Stackable Sealed Switch
U 1 N.C. 5 1 N.O.
I 1 N.O.E.M. 6 1 N.C.
Q 1 N.C.L.B. 7 1 N.O. - 1 N.C.
F 1 N.O. - 1 N.C.  

Table 1. Selector Push Button Cam Targets (Note: X = Closed/O = Open)

Sleeve Position Cam Description
Click to enlarge - 800T_800H-1_9-4 Click to enlarge - 800T_800H-1_9-5 KA/K KB KC KD KE
Button
Free
Button
Pressed
Button
Free
Button
Pressed
Contact Block Side
Right Left Right Left Right Left Right Left Right Left
O O O X D, H, V, R, 5 D, H, V, R, 5
O O X O E, U, W, S, 6 E, U, W, S, 6 E, U, W, S, 6 E, U, W, S, 6
O O X X E, U, W, S, 6 E, U, W, S, 6
O X O O D, H, V, R, 5 D, H, V, R, 5 D, H, V, R, 5
O X O X D, H, V, R, 5 D, H, V, R, 5 D, H, V, R, 5 D, H, V, R, 5 D, H, V, R, 5
O X X O
X O X O J or Q J or Q E, U, W, S, 6 J or Q J or Q
X X O O G or I G or I
X X O X G or I G or I G or I G or I
X O X X E, U, W, S, 6 J or Q J or Q
X X X O E, U, W, S, 6 E, U, W, S, 6

Table 2. Contact Block Reduction Rules

Contact Block Substitution
Standard
Combination Substitute Code
D + E A
D + D M⋆ 
E + E N
J + D B
J + E C

⋆ XA2 and XA2R contact blocks cannot be stacked upon, but they can stack on other contact blocks.


Cylinder Lock Push Button Devices (Bul. 800T only)

Click to enlarge - 800T_800H-1_26-1      Click to enlarge - 800T_800H-1_26-2
Cylinder Lock Push Button
Cat. No. 800T-E15A
     Mushroom Style Cylinder Lock
Cat. No. 800T-E15M6A

Type of Cylinder Lock Lock Position Type 4/13
Standard
Cylinder Lock
Red Mushroom
Cylinder Lock
Cat. No.⋆  Cat. No.⋆ ‡ 
Spring Bolt — Lock can be set with key when button is in the OUT position. Button will lock when depressed. Key removable in any position. 1 N.O. - 1 N.C. IN 800T-E15A 800T-E15M6A
Dead Bolt A — Button can only be operated with the key in the lock. Key removable in locked position only. 1 N.O. - 1 N.C. IN 800T-E24A 800T-E24M6A
OUT 800T-E14A 800T-E14M6A
Dead Bolt B — Button can be operated with or without the key inserted in the lock. Key removable in any position. 1 N.O. - 1 N.C. IN 800T-E12A 800T-E12M6A
OUT 800T-E11A 800T-E11M6A
  
⋆ Each device supplied with 2 keys. Replacement key part no. for standard E158 is X-144218.
‡ For jumbo size mushroom cap, change M to J. Example: Cat. No. 800T-E15M6A becomes Cat. No. 800T-E15J6A.

Momentary Padlocking Mushroom Head Devices (Bul. 800T only) § 

Click to enlarge - 800T_800H-1_26-3      Click to enlarge - 800T_800H-1_26-4
Padlocking Mushroom Button
Cat. No. 800T-D6QA
     Padlocking Jumbo Mushroom Button
Cat. No. 800T-D6LQA

Contact Type Button Color Type 4/13
Standard Size
Metal Mushroom Head
Jumbo Size
Metal Mushroom Head
Cat. No.♣  Cat. No.♣ 
No Contact Red 800T-D6Q 800T-D6LQ
Click to enlarge - 800T_800H-1_6-5 1 N.O. 800T-D6QD1 800T-D6LQD1
Click to enlarge - 800T_800H-1_6-6 1 N.C. 800T-D6QD2 800T-D6LQD2
Click to enlarge - 800T_800H-1_3-4 1 N.O. - 1 N.C. 800T-D6QA 800T-D6LQA
  
§ Allows locking in the depressed position. Will hold N.C. contacts open, but might not hold N.O. contacts closed.
♣ To order without the padlocking attachment, change Q to F. Example: Cat. No. 800T-D6QA becomes Cat. No. 800T-D6FA

Momentary Contact Flip Lever Devices (Bul. 800H Type 4/4X only)

Click to enlarge - 800H-WK42B_right_4c      Click to enlarge - 800H-WK61B_right_4c
Flip Lever Operator
Cat. No. 800H-WK42B
     Flip Lever Operator
Cat. No. 800H-WK61B

Contact Type Button Color Legend Marking Flip Lever
Cat. No.
No Contacts Grey START 800H-WK42
No Legend⋆  800H-WK4
Red‡  STOP 800H-WK61
No Legend⋆  800H-WK6
Click to enlarge - 800T_800H-1_3-4 1 N.O. - 1 N.C. Grey START 800H-WK42A
No Legend⋆  800H-WK4A
Red‡  STOP 800H-WK61A
No Legend⋆  800H-WK6A
Click to enlarge - 800T_800H-1_3-4 2 N.O. - 2 N.C. Grey START 800H-WK42B
No Legend⋆  800H-WK4B
Click to enlarge - 800T_800H-1_3-4 Red‡  STOP 800H-WK61B
No Legend⋆  800H-WK6B
  
⋆ Legend plate can be ordered separately. Refer to accessories section.
‡ Locking provision is supplied as standard on red units.

800H    WK    6    1    A
   a          b    c    d

a    b    c
Finger-Safe Guards Operator Color Operator Types
Code Description Code Description Code Description Code Description
Blank No guards 4 Grey Blank 20 OUT
C Guards on terminals 6 Red 1 STOP 21 RAISE
    2 START 22 RESET
3 CLOSE 23 REVERSE
4 DOWN 24 RIGHT
5 EMERG. STOP 25 RUN
6 FAST 26 SECOND SPEED
7 FORWARD 27 SLOW
8 FULL SPEED 28 TEST
9 HIGH 29 THIRD SPEED
10 IN 30 UP
11 INCH 31 O
12 JOG 32 I
13 LEFT 33 AVANT
14 LOW 34 OUVRIR
15 LOW SPEED 35 ARRIER
16 LOWER 36 MARCHE
17 OFF 37 ESSAI
18 ON 38 ARRET
19 OPEN  

d    d (cont'd)
Contact Block(s) Contact Block(s)
Code Description Code Description
Blank No Contacts PenTUFF (Low Voltage)
Standard D1V 1 N.O.
D1 1 N.O. D2V 1 N.C.
D2 1 N.C. D3V 1 N.O.E.M.
D3 1 N.O.E.M. D4V 1 N.C.L.B.
D4 1 N.C.L.B. AV 1 N.O. - 1 N.C.
D5 1 N.O. (Mini) BV 2 N.O. - 2 N.C.
D6 1 N.C. (Mini) Class 1, Div. 2
A1 1 N.C.L.B. - 1 N.O. Logic Reed
A2 2 N.O. D1R 1 N.O.
A4 2 N.C. D2R 1 N.C.
A7 1 N.C.L.B. - 1 N.C. A2R 2 N.O.§ 
A 1 N.O. - 1 N.C. A4R 2 N.C.
B 2 N.O. - 2 N.C. AR 1 N.O. - 1 N.C.
Class 1, Div. 2 BR 2 N.O. - 2 N.C.
Sealed Switch  
D1P 1 N.O.
D2P 1 N.C.
AP 1 N.O. - 1 N.C.
BP 2 N.O. - 2 N.C
Stackable Sealed Switch
D1Y 1 N.O.
D2Y 1 N.C.
A2Y 2 N.O.
A4Y 2 N.C.
AY 1 N.O. - 1 N.C.
BY 2 N.O. - 2 N.C

Momentary Wobble Stick Push Button Devices (Bul. 800T Type 13 only)

Click to enlarge - 800T_800H-1_27-6
Wobble Stick Unit
Cat. No. 800T-M1B


Contact Type Wobble Stick∆ 
Cat. No.
No Contacts 800T-M1
Click to enlarge - 800T_800H-1_6-5 1 N.O. 800T-M1D1
Click to enlarge - 800T_800H-1_3-4 1 N.O. - 1 N.C. 800T-M1A
Click to enlarge - 800T_800H-1_3-4 2 N.O. - 2 N.C. 800T-M1B
Click to enlarge - 800T_800H-1_3-4
  
∆ Can be operated from any angle.

Break-Glass Push Button Stations (Bul. 800T only)

Complete Station

  Description Contact Type Cat. No.
Click to enlarge - 800T_800H-1_28-1 Break-Glass Push Button Station
Red push button station in a Type 4/13 enclosure incorporates either one or two snap‑action contact blocks, which are operated when the small glass window is broken. Includes STOP legend.
Click to enlarge - 800T_800H-1_3-4

1 N.O. - 1 N.C.



800T-NX114

Click to enlarge - 800T_800H-1_3-4 2 N.O. - 2 N.C. 800T-NX115
Cat. No. 800T-NX114 Click to enlarge - 800T_800H-1_3-4
  

Miscellaneous Kits

  Description Contact Type Cat. No.
Click to enlarge - 800T_800H-1_28-5 Unit Only Kit
The break-glass unit less the enclosure is available as a kit to install into the customer’s enclosure. The kit includes the contact unit, the hammer and chain and five extra glass discs with one button tack. This kit does not include legend plate. For legend plates, see Specialty Legend Plates.
Click to enlarge - 800T_800H-1_3-4 1 N.O. - 1 N.C. 800T-S6M
Click to enlarge - 800T_800H-1_3-4 2 N.O. - 2 N.C. 800T-S6N
Cat. No. 800T-S6M Click to enlarge - 800T_800H-1_3-4
Click to enlarge - 800T_800H-1_28-9 Replacement Snap Action Contact Block Kit
This kit is used to replace the snap action contact block.
Click to enlarge - 800T_800H-1_3-4 1 N.O. - 1 N.C. 800T-NXM
Click to enlarge - 800T_800H-1_3-4 2 N.O. - 2 N.C. 800T-NXN
Cat. No. 800T-NXM Click to enlarge - 800T_800H-1_3-4
  Description Cat. No.
Click to enlarge - 800T_800H-1_28-13 Glass Disc Kit
Each replacement kit for break-glass push button units or stations consists of six glass discs and one button tack.
800T-N28
Cat. No. 800T-N28
  

Custom-Built Stations & Enclosures

Custom-Built Stations

Click to enlarge - 800T_800H-1_29-1


This table (Assembled Stations) lists the most commonly used Bulletin 800T/800H push button stations. Stations not listed in this table may be ordered as custom-built stations.

Cat. No.

The cat. no. used to identify custom-built Bulletin 800T push button stations will be cat. no. listed for enclosure only. The letter Z will be substituted for the letter W and a station serial no. will be added.

Request for Quote

Please submit your request for quote of a custom-built station to racustomercare_gps@ra.rockwell.com, including the following information:

1. Cat. no. of the enclosure.
2. Cat. no. of the control units.
3. Cat. no. of legend plates. Indicate text if custom marking is required.
4. Cat. no. of accessories (e.g., guards or locking attachments)
5. Specify vertical/horizontal mounting.
6. Specify desired operator mounting sequence. Inclusion of a sketch is recommended. If no information is given, standard configurations will be used.

Enclosures

No. of Operator Openings Surface Mount∆  Flush Mount Pendant Type
Die Cast⋆ 
(Type 4/13)
Sheet Metal
(Type 13)
Die Cast Face Plate
(Type 4/13)
One Hole in Bottom
(Type 13)
Openings in Cover
(Type 13)
Click to enlarge - 800T_800H-1_29-2 Click to enlarge - 800T_800H-1_29-3 Click to enlarge - 800T_800H-1_29-4 Click to enlarge - 800T_800H-1_29-5 Click to enlarge - 800T_800H-1_29-6
Cat. No. 800T‑2TZ Cat. No. 800T‑6TJZ Cat. No. 800T‑2ZT Cat. No. 800T‑2PZ Cat. No. 800T‑2PY
Cat. No. Cat. No. Cat. No. Cat. No. Cat. No.
1 800T-1TZ‡  800T-1ZT
2 800T-2TZ‡  800T-2ZT 800T-2PZ 800T-2PY
3 800T-3TZ‡  800T-3ZT 800T-3PZ 800T-3PY
4 800T-4TZ‡  800T-4ZT 800T-4PZ 800T-4PY
5 800T-5PZ 800T-5PY
6§  800T-6TZ‡  800T-6ZT 800T-6PZ 800T-6PY
6♣  800T-6THZ‡  800T-6TJZ 800T-6ZTH
7 800T-7PZ 800T-7PY
8 800T-8PZ 800T-8PY
9 800T-9TZ 800T-9TJZ 800T-9ZT 800T-9PZ 800T-9PY
10 800T-10PZ 800T-10PY
12 800T-12TZ 800T-12TJZ 800T-12ZT
16 800T-16TZ 800T-16TJZ 800T-16ZT
20 800T-20TJZ
25 800T-25TJZ
  
Note:Specialty enclosures available. Please refer to KB Q69259778.
Note:Enclosure and conduit dimensions are detailed on Die Cast Enclosures (Bul. 800T Only).
∆ Bottom conduit entry. Grounding provision provided.
⋆ Enclosure depth will accommodate one shallow and one mini-contact block stacked.
‡ Add suffix Y to the cat. no. for yellow painted enclosure. Example: Cat. No. 800T-1TZY.
§ One vertical row.
♣ Two vertical rows of three holes.

Custom-Built Stations (800H only)

Click to enlarge - 10_78_1


Cat. No.

The cat. no. used to identify custom-built Bulletin 800H push button stations will be cat. no. listed for enclosure only. The letter W is substituted for the letter Z and a station serial no. will be added.

Request for Quote

Please submit your request for quote of a custom-built station to racustomercare_gps@ra.rockwell.com, including the following information:

1. Cat. no. of the enclosure.
2. Cat. no. of the control units.
3. Cat. no. of legend plates. Indicate text if custom marking is required.
4. Cat. no. of accessories (e.g., guards or locking attachments)
5. Specify vertical/horizontal mounting.
6. Specify desired operator mounting sequence. Inclusion of a sketch is recommended. If no information is given, standard configurations will be used.

Enclosures (800H only)

Click to enlarge - 10_78_2      Click to enlarge - 10_78_3      Click to enlarge - 10_78_4      Click to enlarge - PBEnc_2-hole
Stainless Steel
Cat. No. 800H-2HZ4
     Rosite Glass Polyester
Cat. No. 800H-2HZ4R
     Fiberglass
Cat. No. 800H-2HZ4Y
     Thermoplastic Polyester
Cat. No. 800H-2HZ4C

No. of Operator Openings Conduit Hubs Stainless Steel (#304)
Type 4/4X/13⋆ 
Rosite Glass Polyester
Type 4/4X/13
No. of Operator Openings Conduit Openings Fiberglass‡ 
Type 4/4X/13
Thermoplastic Polyester∆ ♦ 
Type 4/4X
No. Dia. [in.] Cat. No. Cat. No. No. Dia. [in.]§  Cat. No. Cat. No.
0♣  1 3/4 800H-0HZ4 1 1 3/4 800H-1HZ4Y 800H-1HZ4C
1 1 3/4 800H-1HZ4 800H-1HZ4R 2 1 1 800H-2HZ4Y 800H-2HZ4C
1 2 3/4 800H-1HZ4RM1 3 1 1 800H-3HZ4Y 800H-3HZ4C
1 1 1 800H-1HZ4RM2 4 800H-4HZ4C
2 1 3/4 800H-2HZ4 800H-2HZ4R
2 2 3/4 800H-2HZ4M1 800H-2HZ4RM1
2 1 1 800H-2HZ4M2 800H-2HZ4RM2
3 1 3/4 800H-3HZ4 800H-3HZ4R
3 2 3/4 800H-3HZ4M1 800H-3HZ4RM1
4 1 3/4 800H-4HZ4 800H-4HZ4R
4 2 3/4 800H-4HZ4M1 800H-4HZ4RM1
5 1 1 800H-5HZ4
6 1 1 800H-6HZ4 800H-6HZ4R
7 1 1 800H-7HZ4
8 1 1 800H-8HZ4
  
Note:Other combinations of conduit hub sizes are available upon request. Enclosure and conduit dimensions are detailed on Die Cast Enclosures (Bul. 800T Only).
⋆ Grounding screw provided with stainless steel enclosure.
‡ Extra deep. Accommodates two levels of stackable sealed switch contact blocks.
§ Conduit hubs must be ordered separately. For 3/4 in. hub, order Cat. No. 1490-N9. For 1 in. hub, order Cat. No. 1490-N10.
♣ Identical to Cat. No. 800H-1HZ4 but without mounting holes.
∆ No conduit openings provided.
♦ Yellow thermoplastic enclosures may be ordered by adding a Y to the cat. no. Example: Cat. No. 800H-1HZ4C becomes Cat. No. 800H-1HZ4CY.

Contact Blocks

Packaged in kit form for field installation. All necessary mounting hardware is provided with each contact block kit. Contact ratings are listed on Standard Contact Ratings.

Note:It is not recommended to mount more than four contact blocks on any one non-illuminated operator (maximum two blocks deep). With the exception of the universal LED power module, contact blocks cannot be stacked onto power modules, so illuminated operators are limited to two contact blocks. Sealed switch contact blocks are not stackable and are limited to two blocks per operator. Time delay contacts are only available as one circuit per operator.


  Click to enlarge - 800T_800H-1_30-1 Click to enlarge - 800T_800H-1_30-2 Click to enlarge - 800T_800H-1_30-3 Click to enlarge - 800T_800H-1_30-4 Click to enlarge - 800T_800H-1_30-5
Contact Type Shallow Block⋆ ‡  PenTUFF
(Low Voltage) Block⋆ ‡ 
Logic Reed
Block§ 
Sealed
Switch Block§ 
Stackable Sealed
Switch Block§ 
Cat. No. Code Cat. No. Code Cat. No. Code Cat. No. Code Cat. No. Code
1 N.O. 800T-XD1 D 800T-XD1V H 800T-XD1R V 800T-XD1P R 800T-XD1Y 5
1 N.C. 800T-XD2 E 800T-XD2V U 800T-XD2R W 800T-XD2P S 800T-XD2Y 6
1 N.O.E.M. 800T-XD3 G 800T-XD3V I
1 N.C.L.B. 800T-XD4 J 800T-XD4V Q
1 N.O. - N.C. 800T-XA A 800T-XAV F 800T-XAR T 800T-XAP P 800T-XAY 7
2 N.O. 800T-XA2♣  M 800T-XA2R♣  Y 800T-XA2Y 8
2 N.C. 800T-XA4 N 800T-XA4R Z 800T-XA4Y 9
1 N.C.L.B. - 1 N.O. 800T-XA1 B
1 N.C.L.B. - 1 N.C. 800T-XA7 C
  
Note:Modular suffix codes can be used when specifying selector switches with multiple contact blocks.

Click to enlarge - 800T_800H_1_30-6
Self Monitoring Contact Block


Contact Type S.M.C.B.⋆ ♦ 
Cat. No. Code
1 N.C.L.B.
(wired in series with 1 N.O. monitoring contact)
800TC-XD4S 3
  

  Click to enlarge - 800T_800H-1_30-7 Click to enlarge - 800T_800H-1_30-8 Click to enlarge - 10_79
Contact Type Mini Block⋆  Time Delay Block∆  MaxDuty Block
Cat. No. Code Cat. No. Cat. No. Code
1 N.O. 800T-XD5 K 800T-XT 800T-XD1M 1
1 N.C. 800T-XD6 L 800T-XS 800T-XD2M 2
1 N.C.L.B. 800T-XD4M 4
  
Note:Modular suffix codes can be used when specifying selector switches with multiple contact blocks.

⋆ Contact blocks with normally closed contacts meet direct drive positive opening standard requirements when properly fused to IEC 269-1 and 269-2. Shallow/mini contacts: 10 A gl or N type cartridge fuse. PenTUFF contacts: 6 A gl or N type cartridge fuse.
‡ Specify Bulletin 800TC for finger-safe contact blocks. Example: Cat. No. 800T-XA becomes Cat. No. 800TC-XA.
§ Bulletin 800T operators using sealed switch or logic reed contact blocks and installed in a suitable enclosure are UL Listed as suitable for use in Class I, Division 2 hazardous locations.
♣ Additional contacts cannot be stacked on XA2 and XA2R contact blocks.
∆ For contact ratings, see Standard Contact Ratings.
♦ For use with 2-position push-pull or push-pull/twist operators only. Must be mounted on the first level of the operator. The N.O. monitoring contact automatically closes when the S.M.C.B. is properly installed onto the operator. If the S.M.C.B. is separated from the operator, the N.O. monitoring contact automatically opens.


Click to enlarge - 800T_800H-1_30-9
Shallow Contact Block Hardware


Description Cat. No. ⋆ 
Contact Block Mounting Screw 800T-N335
Screw Retainer 800T-N336
Actuator Extender 800T-N337
  
⋆ Must be ordered in multiples of 50 pieces.

Power Modules

Packaged in kit form for field installation. Lamps are listed on Replacement Lamps.

Click to enlarge - 800T_800H-1_31-1 Click to enlarge - 800T_800H-1_31-2 Click to enlarge - 800T_800H-1_31-3
Full Voltage Power Module
Cat. No. 800T-N330
Transformer Power Module
Cat. No. 800T-N326
Dual Input Power Modules
Cat. No. 800T-N296 (Transformer)
Cat. No. 800T-N290N (Diode)
Full Voltage♣  Transformer♣  Dual Input
Lamp Voltage Cat. No. Voltage Cat. No. Type Voltage Cat. No.
6…130V AC/DC 800T-N330 48V AC 50/60 Hz 800T-N325 Transformer⋆  120V AC 800T-N296
120V AC 50/60 Hz 800T-N326 Diode Type‡  24V AC/DC 800T-N291N
240V AC 50/60 Hz 800T-N327 120V AC/DC 800T-N290N
277V AC 50/60 Hz 800T-N327Y
480V AC 50/60 Hz 800T-N328
240V AC/DC§  800T-N331 600V AC 50/60 Hz 800T-N329
  
⋆ Transformer type dual input provides circuit isolation via a miniature type relay. This module is used in conjunction with a 120V transformer.
‡ Diode type dual input provides circuit isolation via opposing diodes. Not recommended for use with solid-state outputs and neon indicators.
§ 240V full voltage module contains 50% dropping resistors for use with a 120V incandescent lamp.
♣ Specify Bulletin 800TC for finger-safe power modules. Example: Cat. No. 800T-N330 becomes Cat. No. 800TC-N330.

Click to enlarge - 800T_800H-1_31-4 Click to enlarge - 800T_800H-1_31-5
Resistor Power Module
Cat. No. 800T-N332
Neon Power Module
Cat. No. 800T-N333
Resistor (10% Drop)♦  Neon∆ ♦ 
Voltage Cat. No. Voltage Cat. No.
120V AC/DC 800T-N332 120V AC/DC 800T-N333
240V AC/DC 800T-N334
  
∆ Neon modules contain resistors.
♦ Specify Bulletin 800TC for finger-safe power modules. Example: Cat. No. 800T-N332 becomes Cat. No. 800TC-N332.

Universal LED Module

Click to enlarge - 800TC-N374_4c



Voltage Cat. No.
12…130V AC/DC 800TC-N374
  

Trigger Action E-Stop Latches

Click to enlarge - 800T-N380_4c    Click to enlarge - 800T-N379_4c
Cat. No. 800T-N380 Cat. No. 800T-N379

Description Cat. No.
Illuminated type 800T-N380
Non-illuminated type 800T-N379
  

Replacement Color Caps

Color caps listed below are for field replacement on installed devices or for completion of devices ordered with color caps omitted.

Click to enlarge - 800T_800H-1_32-1    Click to enlarge - 800T_800H-1_32-2    Click to enlarge - 800T_800H-1_32-3    Click to enlarge - 800T_800H-1_32-4
Push-Pull Push-Pull/Twist Push-Pull Jumbo Push-Pull/Twist Jumbo

Push-Pull Color Caps, Illuminated
Color 800T Push-Pull 800H Push-Pull 800T/H Push-Pull/Twist 800T/H Push-Pull Jumbo 800T/H Push-Pull/Twist Jumbo
Cat. No. Cat. No. Cat. No. Cat. No. Cat. No.
Amber 800T-N159A 800H-N112A 800T-N301A 800T-N209A 800T-N306A
Blue 800T-N159B 800H-N112B 800T-N301B 800T-N209B 800T-N306B
Clear 800T-N159C 800H-N112C 800T-N301C 800T-N209C 800T-N306C
Green 800T-N159G 800H-N112G 800T-N301G 800T-N209G 800T-N306G
Red 800T-N159R 800H-N112R 800T-N301R 800T-N209R 800T-N306R
White 800T-N159W 800H-N112W 800T-N301W 800T-N209W 800T-N306W
  

Click to enlarge - 800T_800H-1_32-5    Click to enlarge - 800T_800H-1_32-6    Click to enlarge - 800T_800H-1_32-7    Click to enlarge - 800T_800H-1_32-8    Click to enlarge - 800T_800H-1_32-11
Illuminated Mushroom Illuminated Jumbo Mushroom Standard Push-to-Test Glass Caps for
Pilot Lights

Color 800T/H Push Button Color Caps, Illuminated 800T/H Pilot Light Color Caps Glass Caps for 800T
Pilot Lights
Mushroom Jumbo Mushroom Standard⋆  Push-to-Test⋆  18 mm
Cat. No. Cat. No. Cat. No. Cat. No. Cat. No. Cat. No.
Amber 800T-N304A 800T-N305A 800T-N26A 800T-N42 800T-N122A 800T-N22
Blue 800T-N304B 800T-N305B 800T-N26B 800T-N43 800T-N122B 800T-N23
Clear 800T-N304C 800T-N305C 800T-N26C 800T-N45 800T-N122C 800T-N25
Green 800T-N304G 800T-N305G 800T-N26G 800T-N41 800T-N122G 800T-N21
Red 800T-N304R 800T-N305R 800T-N26R 800T-N40 800T-N122R 800T-N20
White 800T-N304W 800T-N305W 800T-N26W 800T-N44 800T-N122W 800T-N24
  
⋆ Available in bulk quantities of 20. Add suffix (-BP) to the cat. no. and order in multiples of 20.

Click to enlarge - 800T_800H-1_33-3    Click to enlarge - 800T_800H-1_33-4    Click to enlarge - 800T_800H-1_33-5    Click to enlarge - 800T_800H-1_33-6
Plastic Mushroom Plastic Jumbo Mushroom Padlocking Metal Mushroom Metal Jumbo Mushroom

Push Button Color Caps, Non-Illuminated
Button Color 800T Plastic Mushroom 800H Plastic Mushroom 800T Plastic Jumbo Mushroom 800H Plastic Jumbo Mushroom 800T Padlocking Metal Mushroom 800T Metal Jumbo Mushroom
Cat. No. Cat. No. Cat. No. Cat. No. Cat. No. Cat. No.
Red 800T-N246R 800H-N114A 800T-N247R 800H-N115A 800T-N311R ⋆  800T-N248R
Green 800T-N246G 800H-N114B 800T-N247G 800H-N115B 800T-N311G ⋆  800T-N248G
Black 800T-N246B 800H-N114H 800T-N247B 800H-N115H 800T-N311B ⋆  800T-N248B
Orange 800T-N246O 800H-N114F 800T-N247O 800H-N115F 800T-N311O ‡  800T-N248O
Grey 800T-N246GR 800H-N114G 800T-N247GR 800H-N115G 800T-N311GR 800T-N248GR
Blue 800T-N246BL 800H-N114C 800T-N247BL 800H-N115C 800T-N311BL ⋆  800T-N248BL
Yellow 800T-N246Y 800H-N114E 800T-N247Y 800H-N115E 800T-N311Y ⋆  800T-N248Y
Natural §  800T-N248
White 800T-N246W 800H-N114L 800H-N115L
  
For padlocking jumbo mushroom style:
⋆ change listed cat. no. from 248 to 313. Example: Cat. No. 800T-N248G becomes Cat. No. 800T-N313G.
‡ change listed cat. no. from Cat. No. 800T-N248O to Cat. No. 800T-N313.
§ change listed cat. no. from Cat. No. 800T-N248 to Cat. No. 800T-N313GR.

Click to enlarge - 800T_800H-1_33-7    Click to enlarge - 800T_800H-1_33-8    Click to enlarge - 800T_800H-1_33-9    Click to enlarge - 800T_800H-1_33-10
Push-Pull Push-Pull/Twist Push-Pull Jumbo Push-Pull/Twist Jumbo

Button Color 800T/H Push-Pull Color Caps, Non-Illuminated
Push-Pull Push-Pull/Twist Push-Pull Jumbo Push-Pull/Twist Jumbo
Cat. No. Cat. No. Cat. No. Cat. No.
Red 800T-N160A 800T-N302A 800T-N208A 800T-N307A
Green 800T-N160B 800T-N302B 800T-N208B 800T-N307B
Blue 800T-N160C 800T-N302C 800T-N208C 800T-N307C
Yellow 800T-N160E 800T-N302E 800T-N208E 800T-N307E
Orange 800T-N160F 800T-N302F 800T-N208F 800T-N307F
Grey 800T-N160G 800T-N302G 800T-N208G 800T-N307G
Black 800T-N160H 800T-N302H 800T-N208H 800T-N307H
White 800T-N160L 800T-N302L 800T-N208L 800T-N307L
  

Selector Switch Knobs, Illuminated

Click to enlarge - 800T_800H-1_32-9    Click to enlarge - 800T_800H-1_32-10
Standard Knob Knob Lever

Color 800T Knob Type 800H Knob Type
Standard Knob Knob Lever Standard Knob Knob Lever
Cat. No. Cat. No. Cat. No. Cat. No.
Amber 800T-N297A 800T-N298A 800H-N154A 800H-N155A
Blue 800T-N297B 800T-N298B 800H-N154B 800H-N155B
Clear 800T-N297C 800T-N298C 800H-N154C 800H-N155C
Green 800T-N297G 800T-N298G 800H-N154G 800H-N155G
Red 800T-N297R 800T-N298R 800H-N154R 800H-N155R
White 800T-N297W 800T-N298W 800H-N154W 800H-N155W
  

Selector Switches

  Description Item Color Cat. No.
Standard Knob Lever Coin Slot Wing Lever 800T
Knobs and Actuators for Selector Switches
Selector switch knobs can be changed in the field. Standard knob and knob levers can be ordered with white inserts or with a packet of colored inserts which includes one insert of each color.
Standard Knob White 800T-N230F
Click to enlarge - 800T_800H-1_34-3 Kit 800T-N230
Knob Lever White 800T-N231F
Kit 800T-N231
Wing Lever Grey 800T-N238
Red 800T-N238A
Coin Slot Black Only 800T-N239
800H Knob Standard Knob White 800H-N145F
  Description Color Cat. No.
Click to enlarge - 800T_800H-1_34-4 800T/H
Color Insert Kits
Available on Selector switches with removable color inserts. Standard knob and knob levers use the same insert. If color All is selected, a packet of color inserts will be furnished which includes one of each color. Color Insert kits can also be ordered with operators at no additional charge.
Red 800T-N124
Green 800T-N125
Blue 800T-N126
Yellow 800T-N127
White 800T-N128
Orange 800T-N286
All 800T-N123
  

Booted Selector Switch Knobs, Non-Illuminated (800H only)

Click to enlarge - 10_82
Cat. No. 800H-NR5


Insert
Material
Material
Chlorosulfonated Polyethylene§  Silicone Ÿ§  Urethane ŸŸ§  Ethylene Ÿ
Propylene ŸŸ§ 
Cat. No. Cat. No. Cat. No. Cat. No.
Brass ⋆  800H-NR5 ⋆  800H-NR101 ⋆  800H-NR100 ⋆  800H-NR103
Stainless Steel 800HS-NR5 800HS-NR101 800HS-NR100 800HS-NR103
  
⋆ Color insert packet (Cat. No. 800T-N123) is included in each kit.
§ Dots printed on the inside of the boot identify the boot material.

Protective Boots

Protective Boot for Illuminated Push Buttons

Click to enlarge - 800T_800H-1_33-1    Click to enlarge - 800T_800H-1_33-2
Cat. No. 800H-N11 Cat. No. 800H-N12

Description Type Cat. No.
May be added to guarded units, units without guard or Push-to-Test devices. This protective boot guards against the entrance of foreign materials reaching the opening between the button and locking ring. Boot without Guard 800H-N11
Boot with Guard 800H-N12
  

Protective Boots for Non-llluminated Push Buttons‡ 

Boots supplied with control stations and components are made of a chlorosulfonated polyethylene material with stainless steel insert ring. To order boots with silicone, urethane, or ethylene propylene material, see the table below. Material application information shown below.

Click to enlarge - 800T_800H-1_32-12
Cat. No. 800H-N5A


Insert Material Boot Color Material
Chlorosulfonated Polyethylene§  Silicone Ÿ§  Urethane ŸŸ§  Ethylene Ÿ
Propylene ŸŸ§ 
Cat. No. Cat. No. Cat. No. Cat. No.
Stainless steel♣  Red 800H-N5A 800H-N101R 800H-N100R 800H-N103R
Green 800H-N5B 800H-N101G 800H-N100G 800H-N103G
Black 800H-N5H 800H-N101B 800H-N100B 800H-N103B
Yellow 800H-N5E 800H-N101Y 800H-N100Y
Blue 800H-N5C 800H-N101BL 800H-N100BL
  
‡ May be added to flush or extended head push button units to protect against foreign materials reaching the opening between the button and the locking ring.
♣ Series B boots incorporate a stainless steel insert as standard.
§ Dots printed on the inside of the boot identify the boot material.

Protective Boot Application Information


Potentiometer Replacement Knobs

Description Cat. No.
Type 4/13 (800T) 40274-073-55
Type 4/4X/13 (800H) 40274-073-54
  

Push Buttons

  Description Cat. No.
Click to enlarge - 800T_800H-1_34-1 Bul. 800T/H
Mechanical Interlock
Used on momentary contact push button units. Guards against closing the N.O. contacts of one button while the other button’s N.O. contacts are closed. Buttons remain momentary. For maintained units, see Mechanically Interlocked Maintained Push Button Devices.
800T-N179
Cat. No. 800T‑N179
(Operators not included)
Click to enlarge - 800T_800H-1_34-2 Bul. 800T
Rocker Arm Operating Lever
The rocker arm lever operates two flush head or one flush with one extended head momentary contact push button units spaced 1-27/32 in. (46.8 mm) center-to-center. Legend plates must be ordered separately and should be inverted 180° prior to engraving and installation.
800T-N12
Cat. No. 800T‑N12
  

Miscellaneous

  Description Cat. No.
Click to enlarge - 800T_800H-1_35-1 Bul. 800T/H
Mounting Ring Wrench
This wrench will simplify tightening or loosening the octagonal mounting ring used on Bul. 800T units. This wrench is double‑ended and can be used for 18 mm and 30 mm pilot light mounting rings.
800T-N245
Cat. No. 800T‑N245
Click to enlarge - 800T_800H-1_35-2 Bul. 800T/H
Jumbo Push-Pull Cap
For use on Bul. 800T or 800H push-pull operators. Fits on illuminated and non-illuminated devices.
800T-N209RE1
Bul. 800T
63 mm Red Anodized Aluminum Cap
For use on Bul. 800T non-illuminated push‑pull devices.
800T-N210R
Bul. 800T
63 mm Red Anodized Aluminum Cap with "E‑Stop"
For use on Bul. 800T non-illuminated push‑pull devices.
800T-N210RE
Cat. No. 800T‑N209RE1 Bul. 800T
90 mm Gold Anodized Aluminum Cap
For use on Bul. 800T non-illuminated push‑pull devices.
800T-N211GL
Click to enlarge - 800T_800H-1_35-3 Bul. 800T
Bonding Bracket
The bonding bracket establishes an electrical circuit between the mounting surface and metal operator bushing for grounding purposes; recommended for installations which require CSA approval. Necessary mounting hardware is included. Order Cat. No. 800T‑N300 for back‑of‑panel bracket. Order Cat. No. 800T‑N300F for front‑of‑panel bracket.
800T-N300
Cat. No. 800T‑N300 ⋆  800T-N300F
Click to enlarge - 800T_800H-1_35-4 Bul. 800T/H
Lens/Bulb Removal Tool
The small end of this tool provides quick and easy removal of any incandescent or LED lamp.
800F-ALR1
Cat. No. 800F‑ALR1
  
⋆ Must be ordered in multiples of 5 pieces.

  Description Cat. No.
  Click to enlarge - 800t_800h-1_36-1 Cat. No. 800T‑N323 Bul. 800T/H
Finger-Safe Terminal Guards
Snap-on accessories which provide IEC, IP2X and VGB finger-safe protection.
Single terminal guards for single circuit contact blocks, full voltage modules, LED modules, etc. (800T-XD1, -XD2, -XD3, -XD4, -XD5, -XD6, -XAP, -XD1P, -XD2P, -PC…, and -QC…)⋆ 
Note:Must be ordered in multiples of 100 pieces.
800T-N322
Cat. No. 800T‑N324 Cat. No. 800T‑N322 Transformer covers for transformer only.
Note:Must be ordered in multiples of 25 pieces.
800T-N324
Finger-Safe Accessories Multi-terminal side cover for use on single or double circuit contact blocks. (800T-XA, -XA1, -XA2, -XA4, -XA7, -XAR, -XA2R, -XA4R, -XD1R, and -XD2R)
Note:Must be ordered in multiples of 25 pieces.
800T-N323
Potentiometer unit terminal cover
Note:Must be ordered in multiples of 5
800T-N373
Click to enlarge - 800T_800H-1_36-2 Grey Bul. 800T
Trim Washer
Used to mount the operator properly when a legend plate is not being used.
Note: Must be ordered in multiples of 10 pieces.
800T-N292
Plastic Bul. 800H
Trim Washer
Used to mount the operator properly when a legend plate is not being used.
Note: Must be ordered in multiples of 10 pieces.
800H-N148
Cat. No. 800T-N292
Click to enlarge - 800T_800H-1_36-3 Metal Bul. 800T
Thrust Washer
Used to prevent rotation of operators in a keyed or notched hole.
Note: Must be ordered in multiples of 10 pieces.
800T-N293
Plastic Bul. 800H
Thrust Washer
Used to prevent rotation of operators in a keyed or notched hole.
Note: Must be ordered in multiples of 10 pieces.
800H-N146
Cat. No. 800T-N293
  Bul. 800T/H
Panel Gasket
Used for dust, oil, and water ingress protection.
Note: Must be ordered in multiples of 10 pieces.
800T-N19
  Description Color Cat. No.
Click to enlarge - 800T_800H-1_36-5 Bul. 800T/H
Closing Button
Where an enclosure or flush plate with more than the required number of openings is used, this neat‑appearing button can be supplied to close the unused openings.
Grey 800T-N1
Cat. No. 800T-N1 Black 800T-N1B
  
⋆ Power modules excluding transformers and dual inputs

Locking Attachments

  Description Cat. No.
Click to enlarge - 800T_800H-1_37-1 Bul. 800T
Extended Head Push Button Padlocking Attachments
Permits locking in the depressed position. Locks the normally closed contact in the open position. For extended head non-illuminated momentary push buttons.
800T-N2
Cat. No. 800T‑N2
(Padlock not included)
Click to enlarge - 800H-N6_gs Bul. 800H
Extended Head Push Button Padlocking Attachments
Can be applied to either the momentary or maintained contact push button units. Padlocks an extended, non-illuminated STOP button in the depressed position. Kit includes padlocking attachment and STOP legend plate.
800H-N6
Cat. No. 800H‑N6
(Padlock not included)
Click to enlarge - 800T_800H-1_37-2 Bul. 800T
Flush Head Push Button Padlocking Attachments
Permits locking in the depressed position. Locks the normally closed contact in the open position. For flush head push button.
800T-N10
Cat. No. 800T‑N10
(Padlock not included)
Click to enlarge - 800T_800H-1_37-3 Bul. 800T
Momentary Mushroom Padlocking Attachments
For Bul. 800T non-illuminated momentary mushroom push button. Requires use of Cat. No. 800T‑N311 mushroom cap. This device is used to lock the mushroom button in a depressed position.
800T-N315
Cat. No. 800T‑N315
(Padlock not included)
Click to enlarge - 800T_800H-1_37-4 Bul. 800T/H
Push-Pull Padlocking Attachment
For 2-position push-pull and push-pull/twist release illuminated and non-illuminated operators. Use on standard head only (40 mm dia.). Locks the normally closed contacts open only. Conversion of normally closed late break contacts to standard normally closed contacts are recommended when using this accessory. Made of stainless steel.
800T-N314
Cat. No. 800T‑N314
(Padlock not included)
Click to enlarge - 800T_800H-1_37-5 Bul. 800T/H
Padlocking Cover
Guards against unauthorized operation for non-illuminated, standard knob selector switches and potentiometers. Stainless steel and clear plastic construction.
800T-N163
Cat. No. 800T‑N163
(Padlock not included)
  Bul. 800T/H
Trigger Action Padlocking Attachment
For 2-position trigger action E-stops with 45 mm heads.
800T-N378
  

  Description Cat. No.
Click to enlarge - 800T_800H-1_38-1 Bul. 800T/H
Padlocking Cover
Guards against unauthorized operation. For non-illuminated push buttons, 2-position push-pull or twist-release units, and standard knob selector switches.
When applying Cat. No. 800H-N140 on 2-position maintained push-pull units, cover will lock only when the button is in depressed position. Padlocking cover includes blank legend plate for customer marking.
Note: A pre-marked legend plate is available.The words OPEN COVER TO OPERATE are on the front and PULL-TO-START-PUSH-TO-STOP are on the rear. To order legend plate only, specify Cat. No. 800H-W174L.
800H-N140
Cat. No. 800H‑N140
(Padlock not included)
Click to enlarge - 800T_800H-1_38-2 Bul. 800T
2- and 3-Position Non-illuminated Selector Switch Padlocking Attachment — Standard Knob
Padlocking guard for 2- and 3-position selector switches with standard knob operators only. Locks selector switch in any maintained position.⋆ 
800T-NX446
Cat. No. 800T‑NX446
(Padlock not included)
Click to enlarge - 10_88 Description Position Cat. No.
Bul. 800H
2- and 3-Position Selector Switch with Padlocking Guards
Padlocking guard for 2- and 3‑position selector switches with standard knob operators only.
Left 800H-N141L
Center 800H-N141C
Right 800H-N141R
Cat. No. 800H‑N141R
(Padlock not included)
All 800H-N141A
Click to enlarge - 800T_800H-1_38-3 Bul. 800T
4-Position Selector Switch Attachment — Standard Knob
Kit includes selector switch and guard (padlock not included). Padlocking guard for 4-position selector switches with standard knob operators only. Locks selector switch in any maintained position.⋆ 
800T-NX446A
Cat. No. 800T‑NX446A
(Padlock not included)
  Description Position Cat. No.
Click to enlarge - 800T_800H-1_38-4 Bul. 800T/H
Non-Illuminated Selector Switch Padlocking Attachment
2-, 3-, and 4-position selector switch padlocking attachments. Can be used to lock operators in a desired position. For 3-position selector switches, this device can also be used to lock out a left or right position as shown in the photo to the left.
For 2- and 3-Position Selector Switches
Left 800T-N316L
Center 800T-N316C
Right 800T-N316R
Window Center through Right - Prevent Left Operation 800T-N316J
Window Center through Left - Prevent Right Operation 800T-N316K
For 4-Position Selector Switches
Left (Pos. 1) 800T-N317L
Cat. No. 800H‑N316J
(Padlock not included)
Center Left (Pos. 2) 800T-N317CL
Center Right (Pos. 3) 800T-N317CR
Right (Pos. 4) 800T-N317R
Click to enlarge - 800T_800H-1_38-5 Bul. 800T/H
Illuminated Selector Switch Padlocking Attachment
2- and 3-position selector switch padlocking attachments for illuminated selector switches.


Stainless steel material
For 2-Position Selector Switches
Left 800T-N4162L
Right 800T-N4162R
For 3-Position Selector Switches
Left 800T-N4163L
Center 800T-N4163C
Right 800T-N4163R
Cat. No. 800H‑N4162L
(Padlock not included)
Window Center through Right - Prevent Left Operation 800T-N4163J
Window Center through Left - Prevent Right Operation 800T-N4163K
  
⋆ Diameter of hasp is 11/32 in. (8.73 mm)

Guards

  Description Type Cat. No.
Click to enlarge - 800T_800H-1_39-1 Bul. 800T
Push Button Guards
Momentary push button guards to reduce the risk of accidental operation.
1 in. guard for non-illuminated 800T-N13
1/2 in. guard for non-illuminated 800T-N143
1-1/2 in. guard for illuminated 800T-N93
Cat. No. 800T-N13 1-1/2 in. guard for non-illuminated with locking attachment 800T-N39
Click to enlarge - 10_89_1 Bul. 800H
Illuminated Push Button Guard
This guard provides additional protection against accidental operation of the push button unit.
1-1/2 in. (38.1 mm) guard for illumination units.
800H-N152
Cat. No. 800H-N152
Click to enlarge - 800T-2_23-3 Bul. 800T
18 mm Guard
Provides side protection for 18 mm pilot lights.
800T-N226
Cat. No. 800T-N226
Click to enlarge - 10_89_2 Bul. 800H
Stainless Steel Guard
Used on non-illuminated push buttons that have protective boots as shown on Protective Boots.
800H-N153
Cat. No. 800H-N153
Click to enlarge - 800T_800H-1_39-2 Bul. 800T
Mushroom Push Button Guards
Momentary mushroom guards for standard and jumbo mushroom push buttons. Reduces the risk of accidental operation.
Standard guard 800T-N129
Standard guard with set screw 800T-N165
Jumbo guard 800T-N151
Cat. No. 800T-N129 Jumbo guard with set screw 800T-N154
  Description Type of Finish Cat. No.
Click to enlarge - 800T_800H-1_39-3 Bul. 800T/H
Protective Guard
Protective ring for Bul. 800T 2-position push-pull operators. Illuminated or non-illuminated. Often used to avoid unintentional tripping of E-stop operators. This guard is used with standard size button (40 mm dia.).
Stainless steel 800T-N310
Cat. Nos. 800T‑N310 and 800T‑NX1320 Black 800T-NX1320
  Description Operator Size Cat. No.
Click to enlarge - 800T_800H-1_39-4 Bul. 800T/H
Jumbo Protective Guard
Protective ring for Bul. 800T 2-position push-pull operators. Illuminated or non-illuminated.
Often used to avoid unintentional tripping of E-stop operators.
60 mm (Jumbo) 800T-N310J
Cat. No. 800T-N310J 63 mm 800T-N310L
Click to enlarge - 800F_Guard Bul. 800T/H
Protective Guard
Protective ring for Bul. 800T trigger action E-stop operators.
45 mm 800T-N381
Cat. No. 800H-NTA60G 60/63 mm 800H-NTA60G
Click to enlarge - 800T_800H-1_39-5 Bul. 800T/H
Ramp Guard
For Bul. 800T/800H 2- and 3-position illuminated and non-illuminated push-pull units. Standard size button only (40 mm dia.).
800T-N339
Cat. No. 800T-N339
Click to enlarge - 800T-NX1566_product_4c Bul. 800T
Used with non‑illuminated selector switches. Must be used in conjunction with the Cat. No. 800HS‑NR5 booted selector switch knob.
800T-NX1566
Cat. No. 800T-NX1566
  

Replacement Lamps

Pilot Lights, Illuminated Push Buttons, Illuminated Push-Pull, Illuminated Push-Pull/Twist to Release, and Illuminated Selector Switches

Lamp Type Current, Typical Lamp Voltage ANSI No. Catalog Voltage Code Cat. No.
Incandescent Full Voltage
Transformer
150 mA/250 mA 6.3V AC 755/1866 6, 16, 26, 36, 46, 56, 76 ⋆  800T-N65
Click to enlarge - 800T_800H-1_40-1 Full Voltage 80 mA 14V AC/DC 756 12 ⋆  800T-N141
70 mA 24V AC/DC 757 24 ⋆  800T-N157
50 mA 48V AC/DC 1835 48 ⋆  800T-N365
Full Voltage
Resistor
22 mA 120V AC/DC 949 10, 11 ⋆  800T-N169
Flashing 150 mA 6V AC/DC 267 6 ⋆  800T-N212
Dual Input Diode 57 mA 24V AC/DC 24 MB 24 ⋆  800T-N180
21 mA 120V AC 90 MB 16 ⋆  800T-N261
Neon 2 mA 120V AC/DC B2A 10, 20 609-N9
Click to enlarge - 800T_800H-1_40-2
Lamp Type Current, Typical‡  Lamp Voltage Leakage Current Code Cat. No.‡ 
LED§  Universal 13 mA @ 24V DC
8.5 mA @ 120V AC§ 
3V♣  3 mA 2 800T-N376x
Click to enlarge - 800T_800H-1_40-2 Transformer 60 6V 14 mA 16, 26, 46, 56 800T-N377x
  
⋆ Item is sold in multiples of 5. Order quantity of 5 to receive package of 5 pieces.
‡ To complete the cat. no. replace the x with the first letter of the desired color: Green, Red, or White.
§ Typical current consumption values indicated are relative to the input of the power module.
♣ Lamp is intended for use with power module Cat. No. 800TC-N374 which has an input voltage rating of 12 …130V AC/DC.

Legacy LED Lamps∆ 

Lamp Type Current, Typical♦  Lamp Voltage Leakage Current Catalog Voltage Code Cat. No.♠ 
LED&  Full Voltage 13 mA/22 mA 12V AC/DC 3 mA 12 800T-N362x
20 mA/21 mA 24V AC/DC 3 mA 24 800T-N319x
Click to enlarge - 800T_800H-1_40-2 12 mA/17 mA 32V AC/DC 3 mA 32 800T-N363x
9 mA/14 mA 48V AC/DC 3 mA 48 800T-N364x
3.3 mA/6 mA 120V AC 10 800T-N320x
4.5 mA/6.2 mA 130V AC/DC 3 mA 13 800T-N321x
Full voltage 50 mA 6V AC 14 mA 6, 16, 26, 36, 46, 56, 76 800T-N318x
Flashing 18 mA 24V AC/DC N/A ▶  800T-N319Fx
  
∆ In full voltage applications, these lamps are intended to be used with power module Cat. No. 800T-N330.
& All LEDs except 120V have an internal shunt resistor for use with solid-state outputs. LEDs will not illuminate below listed leakage current.
♦ Typical current draw varies with LED color. The first mA value is for a green or blue LED and the second mA value is for a red or amber LED.
♠ To complete the cat. no. replace the x with the first letter of the desired color: Amber, Green, Red, Blue, or White. White LEDs only available in 6V, 24V, 120V, and 130V.
▶ Flashing rate is 2 Hz.

Cluster Pilot Lights

Lamp Type Current, Typical Lamp Voltage ANSI No. Cat. No.⋆ 
Incandescent Full Voltage
Transformer
195 mA 6V AC/DC 381 800T-N258
Click to enlarge - 800T_800H-1_40-8 Full Voltage 73 mA 12V AC/DC 382 800T-N259
37 mA 24V AC/DC 387 800T-N260
Lamp Type Current, Typical Lamp Voltage Polarity Cat. No.# 
LED Full Voltage
Transformer
45 mA 6V AC/DC Positive 800T-N340x
Click to enlarge - 800T_800H-1_40-9 Full Voltage 36 mA 12V AC/DC Positive 800T-N341x
14 mA 28V AC/DC Bi-Polar ※  800T-N80x
  
⋆ Item is sold in multiples of 5. Order quanitity of 5 to receive package of 5 pieces.
# To complete the cat. no., replace the x with the first letter of the desired color: Amber, Green, or Red only.
※ For use with 24V AC/DC rated devices.

Replacement Keys for Cylinder Lock 2-, 3-, and 4-Position Selector Switches (800T only)

Cylinder Lock Key
Option Code
Series Key Number Cat. No. Cylinder Lock Key
Option Code
Series Key Number Cat. No.
Blank (standard key) D018 (standard key) X-181170 15 T112‡  40269-087-01
03 D020⋆  X-307922 16 T115‡  40269-087-02
04 D025⋆  X-307923 17 T324‡  40269-087-03
05 D335⋆  X-307924 18 T382‡  40269-087-04
06 D429⋆  X-307925 19 T404‡  40269-087-05
07 D461⋆  X-307926 20 T171‡  40269-087-06
08 D111⋆  X-307927 21 T484‡  40269-087-07
09 D587⋆  X-307928 22 T547‡  40269-087-08
10 D682⋆  X-307929 23 T569‡  40269-087-09
11 D713⋆  X-307930 24 T692‡  40269-087-10
12 D900⋆  X-307931 25 T752‡  40269-087-11
13 D992⋆  X-307932 26 T178‡  40269-087-12
14 D118⋆  X-307933  
  
⋆ Uses master key DM81, AB Cat. No. X-433358.
‡ Uses master key 15T, AB Cat. No. X-433359.

Replacement Keys for Push Button Switches with Cylinder Locks (800T only)

Lock Key Option Code Series Key Number Cat. No.
Spring Bolt Dead Bolt A Dead Bolt B
Blank (standard key) Blank (standard key) Blank (standard key) E158 (standard key) X-144218
44 32 20 E109 X-386233
45 33 21 E131 X-386234
46 34 22 E100 X-386235
47 35 23 E115 X-386236
48 36 24 E120 X-386237
49 37 25 E104 X-386238
50 38 26 E108 X-386239
51 39 27 E132 X-386240
52 40 28 E144 X-386241
53 41 29 E157 X-386242
54 42 30 E101 X-386243
55 43 31 E102 40274-250-01
66 61 56 E106 40274-250-07
67 62 57 E111 40274-250-02
68 63 58 E117 40274-250-14
69 64 59 E125 40274-250-21
70 65 60 E130 40274-250-26
  

Legend Plates

Trigger Action Emergency Stop Legend Plates (60 mm Round) ♣ 

800F 15Y    E112
           a

Click to enlarge - 800F-15Y_eStop_withDim


a    a (cont'd)
Text Text
Code Description Code Description
Blank No text W112 NÆDSTOPP, EMERGENCY STOP
E112 EMERGENCY STOP A112 NÆDSTOP
F112 ARRÊT D’URGENCE B112 EMERGENCY STOP, ARRÊT D’URGENCE, PARADA DE EMERGENCIA
S112 PARO DE EMERGENCIA D112 NOODSTOP
G112 NOT HALT M112 NOT HALT, ARRESTO EMERGENZA, ARRÊT D’URGENCE
T112 ARRESTO EMERGENZA L112 NEYÐARSTOPP, NEYÐARSTOPP
N112 NÖDSTOPP, EMERGENCY STOP H112 NÖD-STOP, HÄTÄ-SEIS, NÖD-STOP

♣ Sold only multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces.


Blank and Custom Legend Plates — Aluminum, Type 4/13 (800T)

Blank/Custom Legend Plates

  Click to enlarge - 800T_800H-1_41-1 Click to enlarge - 800T_800H-1_41-2
Legend Plate Color Standard Jumbo
Cat. No. Cat. No.
Grey 800T-X559 800T-X559J
Red 800T-X621 800T-X621J
Yellow 800T-X679 800T-X679J
Grey (with custom text) 800T-X559E 800T-X559JE
Red (with custom text) 800T-X621E 800T-X621JE
Yellow (with custom text) 800T-X679E 800T-X679JE
  
Note:Custom text is limited to alpha-numeric characters only.

Specialty Legend Plates

  Click to enlarge - 800T_800H-1_41-3 Click to enlarge - 800T_800H-1_41-4
Legend Plate Color Automotive Half Round⋆ 
Cat. No. Cat. No.
Grey (blank) 800T-X700 800T-X59
Red (blank) 800T-X701 800T-X121
Grey (with custom text) 800T-X700E 800T-X59E
Red (with custom text) 800T-X701E 800T-X121E
  
Note:Include text with custom legends.
Note:Custom text is limited to alpha-numeric characters only.
⋆ All half round legend plates must be ordered in quantities of 25.

Custom Text Guidelines

Legend Size No. of Lines Max. No. of Characters per Line
Standard 1 line of
2 lines of
14
14
Jumbo 5 lines 14
Automotive 4 lines 20
  

Custom Legend Plates for 4-Way Toggle and Cluster Pilot Lights

Legend Size Cat. No.§  Color Text Options‡ 
Standard 800T-X619E Aluminum (with custom text) 2 lines of up to 14 characters on top
1 line of up to 14 characters on bottom
1 vertical line of up to 7 characters on left side
1 vertical line of up to 7 characters on right side
1 vertical line of up to 9 characters on left side
1 vertical line of up to 9 characters on right side
  
Note:Custom text is limited to alpha-numeric characters only.
‡ Rule sets listed are mutually exclusive; only one can be chosen.
§ For blank toggle or cluster pilot legend, order Cat. No. 800T-X619.

Specialty Legend Plates

Click to enlarge - 800T_800H-1_42-1    Click to enlarge - 800T_800H-1_42-2    Click to enlarge - 800T_800H-1_42-3
Cat. No. 800T-X618 Cat. No. 800T-X647Y Cat. No. 800T-X646

Type Start/Stop
Legend Plates
Emergency Stop
Legend Plates
Grey Yellow Yellow (Large Size) Yellow IEC Ring
Cat. No. Cat. No. Cat. No. Cat. No.
Push-to-Stop
Pull-to-Start
or
Push-to-Stop
Twist or Pull Release
800T-X618 800T-X618Y 800T-X647Y
Blank 800T-X645Y 800T-X646
Custom 800T-X645YE
Emergency Stop 800T-X646EM
  
Note:Custom text is limited to alpha-numeric characters only.

Potentiometer Legend Plates

Click to enlarge - 800T_800H-1_42-4    Click to enlarge - 800T_800H-1_42-5
Cat. No. 800T-X609 Cat. No. 800T-X608

Type Cat. No.
Potentiometer with graduated markings ⋆  800T-X609
SPEED 800T-X608
  
⋆ For graduated markings with a custom text, order Cat. No. 800T-X609E and specify up to two lines of text, 14 characters per line.

Standard Legend Plates – Aluminum, Type 4/13 (Bul. 800T)

Click to enlarge - 800T_800H-1_43-1    Click to enlarge - 800T_800H-1_43-2
Standard Legend Plate Jumbo Legend Plate

Marking Standard Jumbo Marking Standard Jumbo
Cat. No. Cat. No. Cat. No. Cat. No.
AUTO-OFF-HAND 800T-X501 800T-X501J ON-OFF 800T-X622 800T-X622J
AUTO-MAN-OFF 800T-X625 800T-X625J OPEN 800T-X531 800T-X531J
CLOSE 800T-X502 800T-X502J OPEN-CLOSE 800T-X532 800T-X532J
CYCLE START 800T-X562 800T-X562J OPEN-OFF-CLOSE 800T-X533 800T-X533J
DOWN 800T-X503 800T-X503J OUT 800T-X534 800T-X534J
EMERG. STOP (Yellow) 800T-X504Y POWER ON 800T-X639 800T-X639J
EMERG. STOP (Red)⋆  800T-X504 800T-X504J RAISE 800T-X535 800T-X535J
EMERGENCY STOP (Red)⋆  800T-X648 800T-X648J RAISE-LOWER 800T-X536 800T-X536J
FAST 800T-X505 800T-X505J RAISE-OFF-LOWER 800T-X537 800T-X537J
FEED START 800T-X566 800T-X566J RESET 800T-X538 800T-X538J
FEED STOP 800T-X567 800T-X567J REVERSE 800T-X539 800T-X539J
FOR.-REV. 800T-X506 800T-X506J RUN 800T-X540 800T-X540J
FOR.-OFF-REV. 800T-X507 800T-X507J RUN-INCH 800T-X634 800T-X634J
FORWARD 800T-X508 800T-X508J RUN-JOG 800T-X541 800T-X541
FOURTH SPEED 800T-X624 800T-X624J SAFE-RUN 800T-X542 800T-X542J
FULL SPEED 800T-X509 800T-X509J SECOND SPEED 800T-X543 800T-X543J
HAND-AUTO 800T-X510 800T-X510J SPEED‡  800T-X608
HAND-OFF-AUTO 800T-X511 800T-X511J SLOW 800T-X544 800T-X544J
HIGH 800T-X512 800T-X512J SLOW-FAST 800T-X545 800T-X545J
HIGH-LOW 800T-X513 800T-X513J SLOW-OFF-FAST 800T-X546 800T-X546J
HIGH-OFF-LOW 800T-X514 800T-X514J START 800T-X547 800T-X547J
IN 800T-X515 800T-X515J START-JOG 800T-X548 800T-X548J
INCH 800T-X516 800T-X516J START-STOP 800T-X549 800T-X549J
JOG 800T-X517 800T-X517J STOP (Red) 800T-X550 800T-X550J
JOG FORWARD 800T-X518 800T-X518J STOP-START 800T-X551 800T-X551J
JOG REVERSE 800T-X519 800T-X519J SUMMER-OFF-WINTER 800T-X553 800T-X553J
JOG RUN 800T-X520 800T-X520J SUMMER-WINTER 800T-X552 800T-X552J
JOG-SAFE-RUN 800T-X522 800T-X522J TEST 800T-X554 800T-X554J
JOG-STOP-RUN 800T-X521 800T-X521J THIRD SPEED 800T-X555 800T-X555J
LEFT-RIGHT 800T-X523 800T-X523J UP 800T-X556 800T-X556J
LOCAL-REMOTE 800T-X638 800T-X638J UP-DOWN 800T-X557 800T-X557J
LOW 800T-X524 800T-X524J UP-OFF-DOWN 800T-X558 800T-X558J
LOW SPEED 800T-X525 800T-X525J O (Red) 800T-X640 800T-X640J
LOWER 800T-X526 800T-X526J I 800T-X641 800T-X641J
OFF 800T-X527 800T-X527J O I 800T-X642 800T-X642J
OFF-COOLANT-ON 800T-X528 800T-X528J I O II 800T-X643 800T-X643J
OFF-ON 800T-X529 800T-X529J
ON 800T-X530 800T-X530J
  
⋆ These legend plates do not comply with E-Stop standards that specify a yellow background, such as IEC 60947-5-5 and NFPA 79.
‡ Potentiometer type with graduated markings.

Legend Plates – Plastic, Type 4/4X/13 (800H)

Click to enlarge - 800T_800H-1_44-1    Click to enlarge - 800T_800H-1_44-2    Click to enlarge - 800T_800H-1_44-3
Standard Legend Plate
Cat. No. 800H-W100
Jumbo Legend Plate
Cat. No. 800H-W100J
Automotive Legend Plate
Cat. No. 800H-W100A

Blank/Custom Legend Plates Type 4/4X
Legend Plate Color Standard Jumbo Automotive
Cat. No. Cat. No. Cat. No.
Grey (Blank) 800H-W100 800H-W100J 800H-W100A
Red (Blank) 800H-W300 800H-W300J 800H-W300A
White (Blank) 800H-W500 800H-W500J ⋆  800H-W500A
Yellow (Blank) 800H-W700 800H-W700J 800H-W700A
Grey (with Custom Text) 800H-W100E 800H-W100JE 800H-W100AE
Red (with Custom Text) 800H-W300E 800H-W300JE 800H-W300AE
White (with Custom Text) 800H-W500E 800H-W500JE 800H-W500AE
Yellow (with Custom Text) 800H-W700E 800H-W700JE 800H-W700AE
  
Note:Include text with custom legends.
Note:Custom text is limited to alpha-numeric characters only.
⋆ Must be ordered in multiples of 10 pieces.

Custom Text Guidelines

Legend Size Number of Lines Maximum Number of Characters per Line
Standard 1 Line of
2 Lines of
13
13
Jumbo 5 Lines 13
Automotive 4 Lines 16
  

Click to enlarge - 800T_800H-1_44-5
Potentiometer Legend Plate
Cat. No. 800H-W080


Potentiometer Legends
Legend Marking Cat. No.
Graduated Markings Only 800H-W080
SPEED 800H-W081
Custom Legend with Graduated Marking 800H-W080E
  
Note:Custom text is limited to alpha-numeric characters only.

Click to enlarge - 800T_800H-1_44-6    Click to enlarge - 800T_800H-1_44-7    Click to enlarge - 800T_800H-1_44-8
Cat. No. 800H-W196 Cat. No. 800H-W797A Cat. No. 800H-W690

  Start/Stop Legend Plates Emergency Stop Legend Plates
Type Grey Yellow (Large Size) Yellow IEC Ring
Cat. No. Cat. No. Cat. No.
Push-to-Stop
Pull-to-Start
800H-W196 800H-W797A
Blank 800H-W700A 800H-W690
Custom 800H-W100E 800H-W700AE
  
Note:Custom text is limited to alpha-numeric characters only.

Standard Legend Plates – Plastic, Type 4/4X/13 (800H)

Click to enlarge - 800T_800H-1_45-1    Click to enlarge - 800T_800H-1_45-2
Grey Legend Plate
Type 4/4X
White Legend Plate
Type 4/4X

Marking Grey Type 4/4X White Type 4/4X Marking Grey Type 4/4X White Type 4/4X
Cat. No. Cat. No. Cat. No. Cat. No.
AUTO OFF HAND 800H-W154 800H-W554 LOWER 800H-W115 800H-W515
AUTO MAN OFF 800H-W059 800H-W459 MAN AUTO 800H-W031 800H-W431
CLOSE 800H-W101 800H-W501 MAN OFF AUTO 800H-W062 800H-W462
CYCLE START 800H-W006 800H-W406 MOTOR RUN 800H-W008 800H-W408
CYCLE STOP (Red) 800H-W376 MOTOR STOP (Red) 800H-W375
DECREASE 800H-W002 800H-W402 OFF 800H-W116 800H-W516
DOWN 800H-W102 800H-W502 OFF COOLANT ON 800H-W052 800H-W452
EMERG. STOP (Red)⋆  800H-W372 OFF LOC REMOTE 800H-W061
EMERGENCY STOP (Red)⋆  800H-W373 OFF MAN AUTO 800H-W060 800H-W460
FAST 800H-W104 800H-W504 OFF ON 800H-W133 800H-W533
FEED START 800H-W007 ON 800H-W117 800H-W517
FEED STOP (Red) 800H-W377 OPEN 800H-W118 800H-W518
FOR. REV. 800H-W132 800H-W532 OPEN CLOSE 800H-W134 800H-W534
FOR. OFF REV. 800H-W152 800H-W552 OPEN OFF CLOSE 800H-W153 800H-W553
FORWARD 800H-W105 800H-W505 OUT 800H-W119 800H-W519
FOURTH SPEED 800H-W010 POWER ON 800H-W001 800H-W401
FULL SPEED 800H-W106 800H-W506 PULL-TO-START 800H-W198
HAND AUTO 800H-W131 800H-W531 PUSH-TO-STOP (Red) 800H-W378
HAND OFF AUTO 800H-W151 800H-W551 RAISE 800H-W120 800H-W520
HIGH 800H-W107 800H-W507 RAISE LOWER 800H-W034
HIGH LOW 800H-W030 RAISE OFF LOWER 800H-W156 800H-W556
HIGH LOW OFF 800H-W058 RESET 800H-W121 800H-W521
HIGH OFF LOW 800H-W155 800H-W555 REVERSE 800H-W122 800H-W522
IN 800H-W108 800H-W508 RIGHT 800H-W005 800H-W405
INCH 800H-W109 800H-W509 RUN 800H-W123 800H-W523
INCREASE 800H-W003 RUN INCH 800H-W037
JOG 800H-W110 800H-W510 RUN JOG 800H-W032
JOG FORWARD 800H-W111 800H-W511 SAFE RUN 800H-W033
JOG REVERSE 800H-W112 800H-W512 SECOND SPEED 800H-W124 800H-W524
JOG RUN 800H-W135 800H-W535 SLOW 800H-W125 800H-W525
JOG SAFE RUN 800H-W051 SLOW FAST 800H-W136 800H-W536
JOG STOP RUN 800H-W057 SLOW OFF FAST 800H-W157 800H-W557
LEFT 800H-W004 800H-W404 SPEED‡  800H-W081 800H-W481
LEFT RIGHT 800H-W036 SPEED‡  800H-W182
LOC OFF REMOTE 800H-W055 800H-W455 START 800H-W126 800H-W526
LOW 800H-W113 800H-W513 START JOG 800H-W138 800H-W538
LOW HIGH 800H-W035 START JOG STOP 800H-W158 800H-W558
LOW OFF HIGH 800H-W056 START RUN STOP 800H-W054
LOW SPEED 800H-W114 800H-W514 START STOP 800H-W137 800H-W537
  
⋆ These legend plates do not comply with E-Stop standards that specify a yellow background, such as IEC 60947-5-5 and NFPA 79.
‡ Potentiometer type with graduated markings.

Standard Legend Plates – Plastic, Type 4/4X/13 (800H)

Click to enlarge - 800t_800H-1_46-1    Click to enlarge - 800t_800h-1_46-2
Grey Legend Plate
Type 4/4X
White Legend Plate
Type 4/4X

Marking Grey Type 4/4X White Type 4/4X Marking Grey Type 4/4X White Type 4/4X