Catalogs > Industrial Controls Catalog > Push Buttons > 30 mm

30 mm

Introduction

Standards Compliance and Certifications

Specifications

Assembled & DeviceNet Stations

Trigger Action E-Stops

Momentary Contact Push Buttons

Selector Switches

Pilot Light Devices

Emergency Stop Devices

Specialty Devices

Custom-Built Stations & Enclosures

Accessories

Legend Plates

Approximate Dimensions

Typical Wiring Diagram(s)

Selector Switches

2-Position Selector Switch Devices, Non-Illuminated


Standard Knob Operator Cat. No. 800T-H2A		Knob Lever Operator Cat. No. 800T-H17A		Standard Knob Operator Cat. No. 800H-HR2A

Contact Type		Side	Contact	Operator Position		M = Maintained S = Spring Return	Type 4/13		Type 4/4X/13
							Standard Knob	Knob Lever	Standard Knob
							Cat. No.	Cat. No.	Cat. No.
No Contacts		—	—	—	—	M M	800T-H2	800T-H17	800H-HR2
						S→M	800T-H4	800T-H18	800H-HR4
						M←S	800T-H5	800T-H19	800H-HR5
	1 N.O.	White	A	O	X	M M	800T-H2D1	800T-H17D1	800H-HR2D1
						S→M⋆	800T-H4D1	800T-H18D1	800H-HR4D1
						M←S	800T-H5D1	800T-H19D1	800H-HR5D1
	1 N.O. - 1 N.C.	White	A B	O X	X O	M M	800T-H2A	800T-H17A	800H-HR2A
						S→M⋆	800T-H4A	800T-H18A	800H-HR4A
						M←S	800T-H5A	800T-H19A	800H-HR5A

Note: X = Closed/O = Open
⋆ Target tables are reversed from those shown.

800	T			–	HA		2		A
	a		b		c		d		e

a		b		c
Protection Rating		Finger-Safe Guards		Knob Insert Colors
Protection Rating		Finger-Safe Guards		800T Type 4/13	Description	800H Type 4/4X/13
Code	Description	Code	Description	Code	Description	Code
T	Metal, Type 4/13	Blank	No guards	H	White	HR
H	Plastic, Type 4/4X/13	C	Guards on terminals	HX	Packet of colored inserts‡	HRX
				Metal Wing Lever Colors♣
				Code	Color	Code
				HA	Red	—
				HG	Grey	—

d		e				e (cont'd)
Operator Type and Function		Contact Block(s)				Contact Block(s)
Standard Knob		Code	Description			Code	Description
Code	Operator Function		Contact Configuration	2-Position			Contact Configuration
2	Maintained					Class1, Div. 2/Zone 2
4	Spring return from left§	Blank	No contacts	—	—	Logic Reed∆
5	Spring return from right	Standard				D1R	1 N.O.
Knob Lever♣		D1	1 N.O.	O	X	D2R	1 N.C.
17	Maintained	D2	1 N.C.	X	O	AR	1 N.O. - 1 N.C.
18	Spring return from left§	A	1 N.O. - 1 N.C.	O	X	BR	2 N.O. - 2 N.C.
19	Spring return from right			X	O	Sealed Switch∆
Metal Wing Lever♣		B	2 N.O. - 2 N.C.	O	X	D1P	1 N.O.
11	Maintained			X	O	D2P	1 N.C.
15	Spring return from left§			O	X	AP	1 N.O. - 1 N.C.
16	Spring return from right			X	O	BP	2 N.O. - 2 N.C.
Coin Slot♣		Max Duty (Horsepower Rated)∆				Stackable Sealed Switch∆
6	Maintained	D1M	1 N.O.			D1Y	1 N.O.
7	Spring return from left	D2M	1 N.C.			D2Y	1 N.C.
8	Spring return from right	PenTUFF (Low Voltage)∆				AY	1 N.O. - 1 N.C.
		D1V	1 N.O.			BY	2 N.O. - 2 N.C.
		D2V	1 N.C.
		AV	1 N.O. - 1 N.C.
		BV	2 N.O. - 2 N.C.

‡ One insert of each color (blue, green, orange, red, and yellow).
§ Target tables are reversed from those shown.
♣ Only available on Bul. 800T, Type 4/13 operators.
∆ Contact target tables same as those listed for standard contact blocks.

2-Position Selector Switch Devices, Non-Illuminated (Bul. 800T only)

2-Position Cylinder Lock Operator
Cat. No. 800T-H33A

Contact Type		Side	Contact	Operator Position		M = Maintained S = Spring Return	Type 4/13
							Cylinder Lock∆
							Key Removal — Left‡	Key Removal — Right‡	Key Removal — Both‡
							Cat. No.	Cat. No.	Cat. No.
No Contacts		—	—	—	—	M M	800T-H31	800T-H32	800T-H33
						M←S	800T-H48	—	—
	1 N.O.	White	A	O	X	M M	800T-H31D1	800T-H32D1	800T-H33D1
						S→M⋆	—	800T-H42D1	—
						M←S	800T-H48D1	—	—
	1 N.O. - 1 N.C.	White	A B	O X	X O	M M	800T-H31A	800T-H32A	800T-H33A
						S→M⋆	—	800T-H42A	—
						M←S	800T-H48A	—	—

Note: X = Closed/O = Open
⋆ Target tables are reversed from those shown.
‡ Keys removable from maintained positions only.

800	T			–	H31				A
	a		b		c		d		e

a		b		c
Protection Rating		Finger-Safe Guards		Key Removal Position
				Maintained
Code	Description	Code	Description	Code	Operator Function
T	Metal, Type 4/13	Blank	No guards	H31	Key removal — left
		C	Guards on terminals	H32	Key removal — right
				H33	Key removal — both
				Spring Return From Left
				Code	Operator Function
				H42	Key removal — right⋆
				Spring Return From Right
				Code	Operator Function
				H48	Key removal — left

d				e				e (cont'd)
Key Options for Cylinder Locks∆		Key Options for Cylinder Locks		Contact Block(s)				Contact Block(s)
Code	T Series Key No.	Code	T Series Key No.	Code	Description			Code	Description
					Contact Configuration	2-Position
					Contact Configuration
Blank	D018 (Std. Key)	15	T112	Blank	No contacts	—	—	PenTUFF (Low Voltage)
03	D020	16	T115	Standard				D1V	1 N.O.
04	D025	17	T324	D1	1 N.O.	O	X	D2V	1 N.C.
05	D335	18	T382	D2	1 N.C.	X	O	AV	1 N.O. - 1 N.C.
06	D429	19	T404	A	1 N.O. - 1 N.C.	O	X	BV	2 N.O. - 2 N.C.
07	D461	20	T171	A	1 N.O. - 1 N.C.	X	O	Class1, Div. 2/Zone 2
08	D111	21	T484	B	2 N.O. - 2 N.C.	O	X	Logic Reed♣
09	D587	22	T547			X	O	D1R	1 N.O.
10	D682	23	T569			O	X	D2R	1 N.C.
11	D713	24	T692			X	O	AR	1 N.O. - 1 N.C.
12	D900	25	T752	Max Duty (Horsepower Rated)				BR	2 N.O. - 2 N.C.
13	D992	26	T178	D1M	1 N.O.			Sealed Switch♣
14	D118	—	—	D2M	1 N.C.			D1P	1 N.O.
								D2P	1 N.C.
								AP	1 N.O. - 1 N.C.
								BP	2 N.O. - 2 N.C.
								Stackable Sealed Switch♣
								D1Y	1 N.O.
								D2Y	1 N.C.
								AY	1 N.O. - 1 N.C.
								BY	2 N.O. - 2 N.C.

⋆ Target tables are reversed from those shown.
‡ Keys removable from maintained positions only.
♣ Contact target tables same as those listed for standard and PenTUFF contact blocks.
∆ Device supplied with 2 keys. Replacement key part no. for standard D018 key is X-181170. See Replacement Keys for Cylinder Lock 2-, 3-, and 4-Position Selector Switches (800T only) for additional replacement key numbers.

3-Position Selector Switch Devices, Non-Illuminated


Standard Knob Operator Cat. No. 800T-J2A		Knob Lever Operator Cat. No. 800T-J17A		Standard Knob Operator Cat. No. 800H-JR2A

Contact Type	Operator Position			M = Maintained S = Spring Return	Type 4/13		Type 4/4X/13
	Operator Position				Standard Knob	Knob Lever	Standard Knob
					Cat. No.	Cat. No.	Cat. No.
No Contacts	—	—	—	M M M	800T-J2	800T-J17	800H-JR2
				S→M M	800T-J4	800T-J18	800H-JR4
				M M←S	800T-J5	800T-J19	800H-JR5
				S→M←S	800T-J91	800T-J20	800H-JR91
	O X	O O	X O	M M M	800T-J2A	800T-J17A	800H-JR2A
				S→M M	800T-J4A	800T-J18A	800H-JR4A
				M M←S	800T-J5A	800T-J19A	800H-JR5A
1 N.O. - 1 N.C.				S→M←S	800T-J91A	800T-J20A	800H-JR91A

Note: X = Closed/O = Open

800	T			–	J		2				C
	a		b		c		d		e		f

a		b		c
Protection Rating		Finger-Safe Guards		Knob Insert Colors
Protection Rating		Finger-Safe Guards		800T Type 4/13	Description	800H Type 4/4X/13
Code	Description	Code	Description	Code	Description	Code
T	Metal, Type 4/13	Blank	No guards	J	White	JR
H	Plastic, Type 4/4X/13	C	Guards on terminals	JX	Packet of colored inserts⋆	JRX
				Metal Wing Lever Colors‡
				Code	Color	Code
				JA	Red	—
				JG	Grey	—

d
Knob/Lever Type Operators
Standard Knob
Code	Operator Function
2	Maintained
4	Spring return from left
5	Spring return from right
91	Spring return from both
Knob Lever‡
Code	Operator Function
17	Maintained
18	Spring return from left
19	Spring return from right
20	Spring return from both
Metal Wing Lever‡
Code	Operator Function
11	Maintained
15	Spring return from left
16	Spring return from right
141	Spring return from both
Coin Slot‡
Code	Operator Function
10	Spring return from both

e		e (cont'd)
Cam Option§		Cam Option§
Code	Description	Code	Description
Blank	KB7 cam (std.)	KQ1	KQ1 cam
KA1	KA1 cam	KQ7	KQ7 cam
KA7	KA7 cam	KR1♣	KR1 cam
KC1	KC1 cam	KR7♣	KR7 cam
KC7	KC7 cam	KT1♣	KT1 cam
KD7	KD7 cam	KT7♣	KT7 cam
KE7♣	KE7 cam	KU7♣	KU7 cam
Note:See Table 1 for cam selections.

f		f (cont'd)
Contact Blocks		Contact Blocks
Code	Description	Code	Description
Blank	No contacts on operator	Blank	No contacts
Standard		Class 1, Div. 2/Zone 2
A	1 N.O. - 1 N.C. 1-800T-XA on white side	Logic Reed
B	2 N.O. - 2 N.C. 2-800T-XAs — 1 on white side/1 on black side	AR	1 N.O. - 1 N.C. 1-800T-XAR on white side
PenTUFF (Low Voltage)		BR	2 N.O. - 2 N.C. 2-800T-XARs — 1 on white side/1 on black side
AV	1 N.O. - 1 N.C. 1-800T-XAV on white side	Sealed Switch
BV	2 N.O. - 2 N.C. 2-800T-XAVs — 1 on white side/1 on black side	AP	1 N.O. - 1 N.C. 1-800T-XAP on white side
		BP	2 N.O. - 2 N.C. 2-800T-XAPs — 1 on white side/1 on black side
		Stackable Sealed Switch
		AY	1 N.O. - 1 N.C. 1-800T-XAY on white side
		BY	2 N.O. - 2 N.C. 2-800T-XAYs — 1 on white side/1 on black side
		Note:Associated targets shown in Table 1.

⋆ One insert of each color (blue, green, orange, red, and yellow).
‡ Only available on Bul. 800T, Type 4/13 operators.
§ If an overlapping cam is required, consult your local distributor.
♣ Not available with wing levers.
∆ See Table 1 for cam selections and associated targets.

Table 1. Cam and Contact Block Functionality Table

Contact Block
Suffix Code

Circuits

Cam Codes

KB7
(Std.)

KA1

KA7

KC1

KC7

KD7

KE7

KQ1

KQ7

KR1

KR7

KT1

KT7

KU7

Note:X = Closed/O = Open

3-Position Selector Switch Devices, Non-Illuminated (Bul. 800T only)

3-Position Cylinder Lock Operator
Cat. No. 800T-J41A

Contact Type	Operator Position			M = Maintained S = Spring Return	Type 4/13
					Cylinder Lock♣
					Key Removal — Left ⋆	Key Removal — Center ⋆	Key Removal — All ⋆
					Cat. No.	Cat. No.	Cat. No.
No Contacts	—	—	—	M M M	800T-J41	800T-J42	800T-J44
				S→M M	—	800T-J50	—
				M M←S	800T-J69	800T-J38	—
				S→M←S	—	800T-J631	—
	O X	O O	X O	M M M	800T-J41A	800T-J42A	800T-J44A
				S→M M	—	800T-J50A	—
				M M←S	800T-J69A	800T-J38A	—
1 N.O. - 1 N.C.				S→M←S	—	800T-J631A	—

Note: X = Closed/O = Open
⋆ Key removable in maintained positions only.

800	T			–	J41				KC1		A
	a		b		c		d		e		f

a		b		c
Protection Rating		Finger-Safe Guards		Key Removal Position
Protection Rating		Finger-Safe Guards		Maintained
Code	Description	Code	Description	Code	Operator Function
T	Metal, Type 4/13	Blank	No guards	J41	Key removal — left
		C	Guards on terminals	J42	Key removal — center
				J43	Key removal — right
				J44	Key removal — all
				J45	Key removal — left and center
				J46	Key removal — right and left
				J47	Key removal — right and center
				Spring Return from Left
				J50	Key removal — center
				J52	Key removal — right
				J51	Key removal — right and center
				Spring Return from Right
				J69	Key removal — left
				J38	Key removal — center
				J73	Key removal — left and center
				Spring Return from Both
				J631	Key removal — center

d		e		e (cont’d)
Key Options for Cylinder Locks♣		Cam Option‡		Cam Option‡
Code	Key No.	Code	Description	Code	Description
Blank	D018 (standard key)	Blank	KB7 cam (std.)	KQ1	KQ1 cam
03	D020	KA1	KA1 cam	KQ7	KQ7 cam
04	D025	KA7	KA7 cam	KR1	KR1 cam
05	D335	KC1	KC1 cam	KR7	KR7 cam
06	D429	KC7	KC7 cam	KT1	KT1 cam
Note: Refer to 2-Position Selector Switch Devices, Non-Illuminated (Bul. 800T only) for additional key option codes.		KD7	KD7 cam	KT7	KT7 cam
		KE7	KE7 cam	KU7	KU7 cam
		Note: See Table 1 for cam selections.

f		f (cont'd)
Contact Blocks		Contact Blocks
Code	Description	Class 1, Div. 2/Zone 2
Blank	No contacts	Logic Reed
Standard		Code	Description
A	1 N.O. - 1 N.C. 1-800T-XA on white side	AR	1 N.O. - 1 N.C. 1-800T-XAR on white side
B	2 N.O. - 2 N.C. 2-800T-XAs — 1 on white side/1 on black side	BR	2 N.O. - 2 N.C. 2-800T-XARs — 1 on white side/1 on black side
PenTUFF (Low Voltage)		Sealed Switch
AV	1 N.O. - 1 N.C. 1-800T-XAV on white side	AP	1 N.O. - 1 N.C. 1-800T-XAP on white side
BV	2 N.O. - 2 N.C. 2-800T-XAVs — 1 on white side/1 on black side	BP	2 N.O. - 2 N.C. 2-800T-XAPs — 1 on white side/1 on black side
		Stackable Sealed Switch
		AY	1 N.O. - 1 N.C. 1-800T-XAY on white side
		BY	2 N.O. - 2 N.C. 2-800T-XAYs — 1 on white side/1 on black side

⋆ Key removable in maintained positions only.
‡ If an overlapping cam is required, consult your local Rockwell Automation sales office or Allen-Bradley distributor.
♣ Device supplied with 2 keys. Replacement key part no. for standard D018 key is X-181170. See Replacement Keys for Cylinder Lock 2-, 3-, and 4-Position Selector Switches (800T only) for additional replacement key numbers.

Table 1. Cam and Contact Block Functionality Table

Contact Block
Suffix Code

Ckts

Cam Codes

KB7
(Std.)

KA1

KA7

KC1

KC7

KD7

KE7

KQ1

KQ7

KR1

KR7

KT1

KT7

KU7

4-Position Selector Switch Devices, Non-Illuminated


Standard Knob Operator Cat. No. 800T-N2KN4B		Knob Lever Operator Cat. No. 800T-N17KN4B		Standard Knob Operator Cat. No. 800H-NR2KF4AAXX

Contact Type	Operator Position				M = Maintained S = Spring Return	Type 4/13		Type 4/4X/13
						Standard Knob	Knob Lever	Standard Knob
						Cat. No.	Cat. No.	Cat. No.
No Contacts	—	—	—	—	M M M M	800T-N2KF4	800T-N17KF4	800H-NR2KF4
					S→M M M	800T-N3KF4	800T-N29KF4	800H-NR3KF4
					M M M←S	800T-N9KF4	800T-N30KF4	800H-NR9KF4
	X O O O	O X O O	O O X O	O O O X	M M M M	800T-N2KF4B	800T-N17KF4B	800H-NR2KF4AAXX
					S→M M M	800T-N3KF4B	800T-N29KF4B	800H-NR3KF4AAXX
2 N.O. - 2 N.C.					M M M←S	800T-N9KF4B	800T-N30KF4B	800H-NR9KF4AAXX

Note: X = Closed/O = Open

800	T			–	N		2		KF4		B
	a		b		c		d		e		f

a		b		c
Protection Rating		Finger-Safe Guards		Knob Insert Colors
Protection Rating		Finger-Safe Guards		800T Type 4/13	Description	800H Type 4/4X/13
Code	Description	Code	Description	Code	Description	Code
T	Metal, Type 4/13	Blank	No guards	N	White	NR
H	Plastic, Type 4/4X/13	C	Guards on terminals	NX	Packet of colored inserts⋆	NRX
				Metal Wing Lever Colors
				Code	Color	Code
				NA	Red	—
				NG	Grey	—

d		e
Operator Function and Knob Type		Cam Option∆
Standard Knob		Cam Option∆
Code	Operator Function	Code	Description
2	Maintained	KF4	F cam
3	Spring return from position 1 to position 2	KG4	G cam
9	Spring return from position 4 to position 3	KK4♦	K cam
Knob Lever♣		KM4♦	M cam
Code	Operator Function	KP4	P cam
17	Maintained	KN4	Overlapping cam‡
29	Spring return from position 1 to position 2
30	Spring return from position 4 to position 3
Metal Wing Lever♣
Code	Operator Function
11	Maintained
13	Spring return from position 1 to position 2
14	Spring return from position 4 to position 3

f			f (cont'd)
Contact Blocks∆			Contact Blocks
800T Type 4/13	Description	800H Type 4/4X/13	800T Type 4/13	Description	800H Type 4/4X/13
Code		Code	Code	Description	Code
Code		Code	PenTUFF (Low Voltage)
Blank	No contacts	Blank	BV	2 N.O. - 2 N.C.	FFXX
Standard			HV	3 N.O. - 3 N.C.	FFFX
B	2 N.O. - 2 N.C. 2-800T-XAs — 1 on white side/1 on black side	AAXX	CV	4 N.O. - 4 N.C.	FFFF
H	3 N.O. - 3 N.C. 3-800T-XAs — 2 on white side/1 on black side	AAAX	Class 1, Div. 2/Zone 2
C	4 N.O. - 4 N.C. 4-800T-XAs — 2 on white side/2 on black side	AAAA	Logic Reed§
			BR	2 N.O. - 2 N.C.	TTXX
			HR	3 N.O. - 3 N.C.	TTTX
			CR	4 N.O. - 4 N.C.	TTTT
			Sealed Switch§
			BP	2 N.O. - 2 N.C.	PPXX
			Stackable Sealed Switch♣
			BY∆	2 N.O. - 2 N.C.	TTXX
			HY∆	3 N.O. - 3 N.C.	TTTX
			CY∆	4 N.O. - 4 N.C.	TTTT

⋆ One insert of each color (blue, green, orange, red, and yellow).
‡ Overlapping cam. See Publication 800T-2.8 for overlap specifications.
§ Contact block mounting same as listed for standard and PenTUFF contact blocks.
♣ Only available on Bul. 800T, Type 4/13 operators.
∆ See Table 1 for proper cam/contact selection.
♦ Not available with wing levers.

Table 1. Cam and Contact Block Functionality Table

Contact Block
Suffix Code

Contact
Block
Side

Circuits

Cam Codes

KF4

KG4

KK4

KM4

KP4

KN4‡

White

Black

White

Black

Note:X = Closed/O = Open

4-Position Selector Switch Devices, Non-Illuminated (800T only)

Cylinder Lock Operator
Cat. No. 800T-N32KF4B

Contact Type	Operator Position				M = Maintained S = Spring Return	Cylinder Lock – Type 4/13♣
						Key Removal — Position 2⋆	Key Removal — Position 3⋆	Key Removal — All⋆
						Cat. No.	Cat. No.	Cat. No.
No Contacts	—	—	—	—	M M M M	800T-N32KF4	800T-N33KF4	800T-N61KF4
					S→M M M	800T-N132KF4	800T-N133KF4	—
					M M M←S	800T-N232KF4	800T-N233KF4	—
	X O O O	O X O O	O O X O	O O O X	M M M M	800T-N32KF4B	800T-N33KF4B	800T-N61KF4B
					S→M M M	800T-N132KF4B	800T-N133KF4B	—
2 N.O. - 2 N.C.					M M M←S	800T-N232KF4B	800T-N233KF4B	—

Note: X = Closed/O = Open
⋆ Key removable in maintained positions only.

800	T			–	N31				KM4		C
	a		b		c		d		e		f

a		b		c		c (cont'd)
Protection Rating		Finger-Safe Guards		Key Removal Position and Operator Function		Key Removal Position and Operator Function
Protection Rating		Finger-Safe Guards		Maintained		Spring Return From Position 1 to Position 2
Code	Description	Code	Description	Code	Operator Function	Code	Description
T	Metal, Type 4/13	Blank	No guards	N31	Key removal position 1	N132	Key removal position 2
		C	Guards on terminals	N32	Key removal position 2	N133	Key removal position 3
				N33	Key removal position 3	N134	Key removal position 4
				N34	Key removal position 4	N154	Key removal positions 2, 3, and 4
				N61	Key removal all positions	Spring Return From Position 4 to Position 3
						Code	Operator Function
						N231	Key removal position 1
						N232	Key removal position 2
						N233	Key removal position 3
						N251	Key removal positions 1, 2, and 3

d		e
Key Options for Cylinder Locks♣		Cam Option
D Series		Cam Option
Code	Key No.	Code	Description
Blank	D018 (standard key)	KF4	F cam
03	D020	KG4	G cam
04	D025	KK4	K cam
05	D335	KM4	M cam
06	D429	KP4	P cam
Note: Refer to 2-Position Selector Switch Devices, Non-Illuminated (Bul. 800T only) for additional key option codes.		KN4	Overlapping cam‡
		Note: See Table 1 for proper cam selection.

f		f (cont'd)
Contact Blocks		Contact Blocks
Code	Description	Code	Description
Blank	No contacts	Sealed Switch§
Standard		BP	2 N.O. - 2 N.C.
B	2 N.O. - 2 N.C. 2-800T-XAs — 1 on white side/1 on black side	Stackable Sealed Switch§
H	3 N.O. - 3 N.C. 3-800T-XAs — 2 on white side/1 on black side	BY	2 N.O. - 2 N.C.
C	4 N.O. - 4 N.C. 4-800T-XAs — 2 on white side/2 on black side	HY	3 N.O. - 3 N.C.
PenTUFF (Low Voltage)		CY	4 N.O. - 4 N.C.
BV	2 N.O. - 2 N.C. 2-800T-XAVs — 1 on white side/1 on black side
HV	3 N.O. - 3 N.C. 3-800T-XAVs — 2 on white side/1 on black side
CV	4 N.O. - 4 N.C. 4-800T-XAVs — 2 on white side/2 on black side
Class 1, Div. 2/Zone 2
Logic Reed§
BR	2 N.O. - 2 N.C.
HR	3 N.O. - 3 N.C.
CR	4 N.O. - 4 N.C.
Note: Associated targets shown in Table 1.

Table 1. Cam and Contact Block Functionality Table

Contact Block
Suffix Code

Contact
Block
Side

Circuits

Cam Codes

KF4

KG4

KK4

KM4

KP4

KN4‡

White

Black

White

Black

Note: X = Closed/O = Open
⋆ Key removable in maintained positions only.
‡ Overlapping cam. One layer of contact blocks allowed, no stacking. See Publication 800T-2.8 for overlap specifications.
§ Contact block mounting same as listed for standard and PenTUFF contact blocks.
♣ Device supplied with 2 keys. Replacement key part no. for standard D018 key is X-181170. See Replacement Keys for Cylinder Lock 2-, 3-, and 4-Position Selector Switches (800T only) for additional replacement key numbers.

2-Position Knob/Lever Type Selector Switch Devices, Illuminated


Standard Knob Operator Cat. No. 800T-16HR2KB6AX		Knob Lever Operator Cat. No. 800H-16HRR17KB6AX

Type	Lamp Type	Volts	Knob Color	Operator Position		M = Maintained S = Spring Return	Type 4/13	Type 4/4X/13
							Standard Knob	Standard Knob
							Cat. No.	Cat. No.
Operator Only⋆				No Contacts		M M	800T-00HX2KB6	800H-00HRX2KB6
Full Voltage	Incandescent	24V AC/DC	Red	X O	O X	M M	800T-24HR2KB6AX	800H-24HRR2KB6AX
						S→M‡	800T-24HR4KL8AX	800H-24HRR4KL8AX
						M←S	800T-24HR5KL8AX	800H-24HRR5KL8AX
	No Lamp	0…250V AC/DC	No Knob			M M	800T-25HXN2KB6AX	800H-25HRXN2KB6AX
Universal	LED	12…130V AC/DC	Red			M M	800T-2HRH2KB6AX	800H-2HRRH2KB6AX
						S→M‡	800T-2HRH4KL8AX	800H-2HRRH4KL8AX
						M←S	800T-2HRH5KL8AX	800H-2HRRH5KL8AX
Transformer	Incandescent	120V AC 50/60 Hz	Red	X O	O X	M M	800T-16HR2KB6AX	800H-16HRR2KB6AX
						S→M‡	800T-16HR4KL8AX	800H-16HRR4KL8AX
						M←S	800T-16HR5KL8AX	800H-16HRR5KL8AX
	LED					M M	800T-16HRH2KB6AX	800H-16HRRH2KB6AX
						S→M‡	800T-16HRH4KL8AX	800H-16HRRH4KL8AX
						M←S	800T-16HRH5KL8AX	800H-16HRRH5KL8AX
	No Lamp	120V AC 50/60 Hz	No Knob			M M	800T-16HXN2KB6AX	800H-16HRXN2KB6AX

Note: X = Closed/O = Open
⋆ Operator only supplied without power module, lamp, lens cap, or contact blocks.						‡ Target tables are reversed from those shown.

1st Level

2nd Level

800

–

KB6

a		b		c		d
Protection Rating		Finger-Safe Guards		Power Module Type and Voltage		No. of Positions
				Full Voltage — Incandescent		Bul. 800T Type 4/13	Description	Bul. 800H Type 4/4X/13
Code	Description	Code	Description	Code	Description	Code		Code
T	Metal, Type 4/13	Blank	No guards	12	12V AC/DC	H	2-position	HR
H	Plastic, Type 4/4X/13	C	Guards on terminals	24	24V AC/DC
				48	48V AC/DC
				Universal — LED
				2	12…130V AC/DC
				Transformer
				16	120V AC 50/60 Hz
				26	240V AC 50/60 Hz
				For other voltages, please contact your local Rockwell Automation sales office or Allen‑Bradley distributor.

e		f		g		h
Knob Color		Illumination Options		Operator Function and Knob Type		Cam Options
Knob Color		Illumination Options		Standard Knob or No Knob		2-Position
Code	Color	Code	Description	Code	Operator Function	Code	Operator Function
A	Amber	Blank	Incandescent	2	Maintained	KB6	Maintained cam
B	Blue	H	LED	4	Spring return from left	KL8	Spring return cam
C	Clear			5	Spring return from right
G	Green			Knob Lever
R	Red			17	Maintained
W	White			18	Spring return from left
X	No knob			19	Spring return from right

i, j
Contact Blocks∆
Code	Description
Blank (both pos.)	No contacts
Standard
D	1 N.O.
E	1 N.C.
A	1 N.O. - 1 N.C.
X	No contacts in this position
PenTUFF (Low Voltage)
H	1 N.O.
U	1 N.C.
F	1 N.O. - 1 N.C.
Class 1, Div. 2/Zone 2
Logic Reed
V	1 N.O.
W	1 N.C.
T	1 N.O. - 1 N.C.
Sealed Switch
R	1 N.O.
S	1 N.C.
P	1 N.O. - 1 N.C.
Stackable Sealed Switch
5	1 N.O.
6	1 N.C.
7	1 N.O. - 1 N.C.

Table 1. Selector Switch Cam Targets

Cam Description (2-Position)
Target		Contact Block Code♠
		Contact Block Code♠
O	X	D, H, V, R, 5
X	O	E, U, W, S, 6

X = Closed/O = Open

Table 2. Contact Block Code Reduction Rules

Contact Block Substitution
Combination	Code
Standard
D + E	A
D + D	M
E + E	N

∆ Contact blocks used on white side only.
♠ Target tables are reversed for spring return from left operators.

3-Position Knob/Lever Type Selector Switch Devices, Illuminated


Standard Knob Operator Cat. No. 800T-16JR2KB7AX		Standard Knob Operator Cat. No. 800H-16JRR2KB7AX

Type	Lamp Type	Volts	Color	Operator Position			M = Maintained S = Spring Return	Type 4/13	Type 4/4X/13
								Standard Knob	Standard Lever
								Cat. No.	Cat. No.
Operator Only⋆				No Contacts			M M M	800T-00JX2KB7	—
Full Voltage	Incandescent	24V AC/DC	Red	X O	O O	O X	M M M	800T-24JR2KB7AX	800H-24JRR2KB7AX
							S→M M	800T-24JR4KB7AX	800H-24JRR4KB7AX
							M M←S	800T-24JR5KB7AX	800H-24JRR5KB7AX
	No Lamp	0…250V AC/DC	No Knob				M M M	800T-25JXN2KB7AX	—
Universal	LED	12…130V AC/DC	Red				M M M	800T-2JRH2KB7AX	800H-2JRRH2KB7AX
							S→M M	800T-2JRH4KB7AX	800H-2JRRH4KB7AX
							M M←S	800T-2JRH5KB7AX	800H-2JRRH5KB7AX
Transformer	Incandescent	120V AC 50/60 Hz	Red	X O	O O	O X	M M M	800T-16JR2KB7AX	800H-16JRR2KB7AX
							S→M M	800T-16JR4KB7AX	800H-16JRR4KB7AX
							M M←S	800T-16JR5KB7AX	800H-16JRR5KB7AX
	LED						M M M	800T-16JRH2KB7AX	800H-16JRRH2KB7AX
							S→M M	800T-16JRH4KB7AX	800H-16JRRH4KB7AX
							M M←S	800T-16JRH5KB7AX	800H-16JRRH5KB7AX
	No Lamp		No Knob				M M M	800T-16JXN2KB7AX	—

Note: X = Closed/O = Open
⋆ Operator only supplied without power module, lamp, lens cap, or contact blocks.

1st Level

2nd Level

800

–

KB7

a		b		c		d
Protection Rating		Finger-Safe Guards		Power Module Type and Voltage		No. of Positions
				Full Voltage — Incandescent		800T Type 4/13	Description	800H Type 4/4X/13
Code	Description	Code	Description	Code	Description	Code		Code
T	Metal, Type 4/13	Blank	No guards	12	12V AC/DC	J	3-position	JR
H	Plastic, Type 4/4X/13	C	Guards on terminals	24	24V AC/DC
				48	48V AC/DC
				Universal — LED
				2	12…130V AC/DC
				Transformer
				16	120V AC 50/60 Hz
				26	240V AC 50/60 Hz
				For other voltages, please contact your local Rockwell Automation sales office or Allen‑Bradley distributor.

e		f		g		h
Knob Color		Illumination Options		Operator Function and Knob Type		Cam Options
Knob Color		Illumination Options		Standard Knob or No Knob		3-Position
Code	Color	Code	Description	Code	Operator Function	Code	Operator Function
A	Amber	Blank	Incandescent	2	Maintained	KB7	B7 cam
B	Blue	H	LED§	4	Spring return from left	KC1	C1 cam
C	Clear			5	Spring return from right	KC7	C7 cam
G	Green			91	Spring return from both	KE7	E7 cam
R	Red			Knob Lever		KQ1	Q1 cam
W	White			Code	Operator Function	KT1	T1 cam
X	No knob			17	Maintained
				18	Spring return from left
				19	Spring return from right
				20	Spring return from both

i, j
Contact Blocks♣
Code	Description
Blank (both pos.)	No contacts
Standard
A	1 N.O. - 1 N.C.
X	No contacts in this position
PenTUFF (Low Voltage)
F	1 N.O. - 1 N.C.
Class 1, Div. 2/Zone 2
Logic Reed
T	1 N.O. - 1 N.C.
Sealed Switch
P	1 N.O. - 1 N.C.
Stackable Sealed Switch
7	1 N.O. - 1 N.C.

Table 1. Selector Switch Cam Targets

Target			Cam Description (3-Position)
			KB7	KC1	KC7	KE7	KQ1	KT1
X	O	O	D, H, V, R, 5	—	D, H, V, R, 5	D, H, V	—	E, U, W, S, 6
O	X	O	—	E, U, W, S, 6	E, U, W, S, 6	—	E, U, W, S, 6	—
O	O	X	E, U, W, S, 6	D, H, V, R, 5	—	—	—	D, H, V, R, 5
X	X	O	G, I	J, Q	—	—	—	J, Q
O	X	X	J,Q	—	J,Q	E, U, W, S, 6	—	—
X	O	X	—	G,I	G,I	—	D, H, V, R, 5	—

‡ LED only.
§ LEDs available in red, green, amber, blue, and white. White LEDs only available in 6V, 24V, 120V, and 130V full voltage and all transformer units. LED color matches lens color, except clear lens supplied with white LED and white lens supplied with amber LED. All LEDs except 120V have an internal shunt resistor for use with solid-state outputs.
♣ Contact blocks used on white side only.