Hazardous Location

Catalogs > Industrial Controls Catalog > Push Buttons > Hazardous Location > Bulletin 800G Hazardous Location Push Buttons

Bulletin 800G Hazardous Location Push Buttons

Product Overview

Bulletin 800G — Hazardous Location Push Buttons

Build a Catalog Number

• IP66, Type 4X
  
• Class I, Zone 1 and Zone 2
  
• Class I/Division 2 — Groups A, B, C, and D
  

Assembled Stations

Bulletin 800G control stations are designed for Class I, Zone 1 and 2 and Class 1/Division 2 hazardous location applications. They consist of Bulletin 800G front-of-panel components with back-of-panel components: contact blocks or power modules. Bulletin 800G units are available as factory assembled stations or as components for component replacement. Field assembled stations used in a Class I, Zone 1 or Zone 2 application must be inspected and certified by a third party.

Components

Since the back-of-panel components are enclosed in a flame-proof enclosure, they are suitable for use in Class I, Zone 1 and Zone 2 Groups IIA, IIB, and IIC and Class I/Division 2, Groups A, B, C, and D hazardous locations and is listed by Underwriters Laboratories and certified by PTB for this class of service. The components have “d” and “e” protection methods except for the cable termination. Cable termination has only “d” protection method, restricted by the cable and not the contacts.

	CAUTION: The assembled stations and individual components listed herein are not suitable for the use in Zone 0, Class I/Division 1 and Class II/Division 1 and Division 2 applications. For Class I and II/Division 1 hazardous locations, order Bulletin 800H Type 7 & 9 stations and units. For Class II/ Division 2 hazardous locations, order Bulletin 800R stations.