Catalogs > Industrial Controls Catalog > Push Buttons > Hazardous Location > Bulletin 800G Hazardous Location Push Buttons
Bulletin 800G Hazardous Location Push Buttons
| Introduction |  |
Standards Compliance | |
Product Selection | |
Accessories | |
Specifications | |
Approximate Dimensions | |
Complete Assembled Stations
| Enclosure Type | Button Type/Color | Legend Marking | Cat. No. |
| One-hole | Black push button | No legend | 800G-1F2A3 |
|
E-Stop | Emergency Stop/Arrêt D'urgence | 800G-1E4A3 |
| Mushroom key release | No legend | 800G-1B4A3 | |
| Cat. No. 800G-1E4A3 | 2-position maintained selector switch | No legend | 800G-1HMA3 |
| Two-hole | 2 black push buttons | No legends | 800G-2F2AF2A3 |
|
Green push button Red push button |
No legends | 800G-2F3AF4A3 |
| Cat. No. 800G-2FAAFBA3 | Green push button Red push button |
START STOP |
800G-2FAAFBA3 |
| Three-hole | Red LED Green push button Red push button |
No legends | 800G-3P4DF3AF4A3 |
|
Red LED Green push button Red push button |
No legend START STOP |
800G-3P4DFAAFBA3 |
| Green push button Red push button E-Stop push/pull |
No legend No legend Emergency Stop/Arrêt D'urgence |
800G-3F3AF4AE4A3 | |
| Cat. No. 800G-3P4DF3AF4A3 | Green push button Red push button E-Stop push/pull |
START STOP Emergency Stop/Arrêt D'urgence |
800G-3FAAFBAE4A3 |
| Ammeter + 1 operator | 1 A ammeter 2-position maintained selector switch |
No legends | 800G-3M1XHMA3 |
|
5 A ammeter 2-position maintained selector switch |
No legends | 800G-3M5XHMA3 |
| Cat. No. 800G-3M1XHMA3 | |||
|
| 800G | – | 2 | F | 3 | M | F | 4 | N | 3 | |||||||||||||
| a | b | c | d | b | c | d | b | c | d | e |
| a | b | |||
| Enclosure Size | Operator/Meter | |||
| Code | Description | Code | Description | |
| 1 | 1-hole | B | Key release mushroom push button⋆ | |
| 2 | 2-hole | D | Momentary mushroom push button‡ | |
| 3 | 3-hole | E | Push-pull mushroom push button⋆ | |
| F | Non-illuminated flush push button♯ | |||
| H | 2-position selector switch‡ | |||
| J | 3-position selector switch‡ | |||
| K | Key release push button | |||
| L | Illuminated push button — flush∆ | |||
| M | Ammeter♣ | |||
| N | Hole plug‡ | |||
| P | Pilot light∆ | |||
| c | d | |||
| Push Button Color/Text | Contact Block/Lamp Module | |||
| Code | Description | Code | Description | |
| 1 | White | A | 1 N.O. - 1 N.C. base mount | |
| 2 | Black | M | 2 N.O. base mount | |
| 3 | Green | N | 2 N.C. base mount | |
| 4 | Red | D | Lamp module base mount (same color as requested lens color in Table c) | |
| 5 | Yellow | X | N/A (i.e., ammeter, hole plug) | |
| 6 | Blue | K | 1 N.O. with lamp module& | |
| A | START (green background/white text) | L | 1 N.C. with lamp module& | |
| B | STOP (red background/white text) | |||
| G | I (green background/white text) | |||
| H | O (red background/white text) | |||
| J | ON (green background/white text) | |||
| K | OFF (red background/white text) | |||
| Key Release | ||||
| 1 | Lockable in initial position, key removal in initial position | |||
| 2 | Lockable in both positions, key removal in both positions | |||
| 3 | Lockable in depressed position, key removal in depressed position | |||
| Selector Switch | ||||
| M | Maintained in all positions | |||
| B | Spring return from both positions♠ | |||
| L | Spring return from left♠ | |||
| R | Spring return from right♠ | |||
| Meters♣ | ||||
| 1 | 1 A | |||
| 5 | 5 A | |||
| e | e (cont'd) | e (cont'd) | |||||
| Conduit Entry | Conduit Entry | Conduit Entry | |||||
| Bottom Entry | Top Entry | Through Feed∇ | |||||
| Code | Description | Code | Description | Code | Description | ||
| Blank | M20X1.5 threaded hole | A | M20X1.5 threaded hole | M | M20X1.5 threaded hole | ||
| 1 | 1/2 in. NPT conduit hub | B | 1/2 in. NPT conduit hub | N | 1/2 in. NPT conduit hub | ||
| 2 | 3/4 in. NPT conduit hub | C | 3/4 in. NPT conduit hub | P | 3/4 in. NPT conduit hub | ||
| 3 | 1 M20 plastic cable gland for cable diameter 6…12 mm | D | 1 M20 plastic cable gland for cable diameter 6…12 mm | Q | 1 M20 plastic cable gland for cable diameter 6…12 mm | ||
| 4 | 1 M25 plastic cable gland for cable diameter 13…18 mm | E | 1 M25 plastic cable gland for cable diameter 13…18 mm | R | 1 M25 plastic cable gland for cable diameter 13…18 mm | ||
| 5 | M20 blind plug | F | M20 blind plug | T | M20 blind plug | ||
| 6 | M25 blind plug | G | M25 blind plug | U | M25 blind plug | ||
| 7 | 2 M20 plastic cable gland | H | 2 M20 plastic cable gland | V | 2 M20 plastic cable gland | ||
| 8 | 1 M20 metal cable gland | J | 1 M20 metal cable gland | W | 1 M20 metal cable gland | ||
| 9 | 1 M25 metal cable gland | K | 1 M25 metal cable gland | X | 1 M25 metal cable gland | ||
| 0 | 2 M20 metal cable gland | L | 2 M20 metal cable gland | Y | 2 M20 metal cable gland | ||
⋆ Only available in red.
‡ Only available in black.
♣ For ammeter, choose 3-hole enclosure with meter in pos. 1 and either an operator or hole plug in pos. 2 (i.e., Cat. No. 800G-3 M1X J1A or Cat. No. 800G-3 M1X N2X)
∆ Only available in white, green, red, yellow, and blue.
♠ Only available for 3-position selector switch.
∇ For through-feed enclosure, selected conduit entry will be applied for both bottom and top entry.
& For use with illuminated push button only.
♯ Only available in white, black, green, red, or yellow.
Push Button, Non-Illuminated — Flush
|
| Color | Flush-Round |
| Cat. No. | |
| White | 800G-F1 |
| Black | 800G-F2 |
| Green | 800G-F3 |
| Red | 800G-F4 |
| Yellow | 800G-F5 |
| 800G | – | F | 3 | |
| a | b |
| a | b | |||
| Operator Construction | Color | |||
| Code | Description | Code | Description | |
| F | Flush operator | 1 | White | |
| 2 | Black | |||
| 3 | Green | |||
| 4 | Red | |||
| 5 | Yellow | |||
Double Push Button, Non-Illuminated — Flush
|
|
|
| Cat. No. 800G-U2FX | Cat. No. 800G-V2FX |
| Description | Cat. No.‡ |
| Double push button with curved base for use with Bul. 800G enclosures. | 800G-U2FX |
| Double push button with flat base for use with customer provided enclosures. | 800G-V2FX |
| ‡ All double push buttons come with a multi-pack of color caps (red, green, black, white, and yellow). | |
Push Button, Illuminated — Flush
|
| Color | Cat. No. |
| White | 800G-LF1 |
| Green | 800G-LF3 |
| Red | 800G-LF4 |
| Yellow | 800G-LF5 |
| Blue | 800G-LF6 |
| 800G | – | LF | 3 | |
| a | b |
| a | b | |||
| Operator Construction | Color | |||
| Code | Description | Code | Description | |
| LF | Illuminated flush operator | 1 | White | |
| 3 | Green | |||
| 4 | Red | |||
| 5 | Yellow | |||
| 6 | Blue | |||
Mushroom — Non-Illuminated and Key Release
|
|
|
||
| Momentary Mushroom Cat. No. 800G-M2 |
Key Release Mushroom Cat. No. 800G-MKE |
Push-Pull Mushroom Cat. No. 800G-MPE |
| Color/Feature | Momentary Mushroom |
Key Release Mushroom |
Push-Pull |
| Cat. No. | Cat. No. | Cat. No. | |
| Black w/black bezel |
800G-M2 | — | — |
| E-Stop red w/ yellow bezel ⋆ |
— | 800G-MKE | 800G-MPE |
| 800G | – | M | 2 | |
| a | b |
| a | b | ||||
| Operator Style | Color or Feature | ||||
| Code | Description | Code | Color | ||
| M | Momentary | 2 | Black with black bezel | ||
| ⋆ | MP | Push-pull | E | Red E-stop with yellow bezel and printing on head | |
| ⋆ | MK | Key release | |||
⋆ Only available in E-stop, option E from Table b.
Key Release
|
| Operator Style | Locking Position | Cat. No. |
| Key Release Push Button |
Lockable in initial position, key removal in initial position | 800G-K14 |
| Lockable in both positions, key removal in both positions | 800G-K16 | |
| Lockable in depressed position, key removal in depressed position | 800G-K24 | |
| 800G | – | K | 14 | |
| a | b |
| a | b | |||
| Operator Style | Locking Postion | |||
| Code | Description | Code | Description | |
| K | Key release push button | 14 | Lockable in initial position; key removal in initial position | |
| 16 | Lockable in both positions; key removal in both positions | |||
| 24 | Lockable in depressed position; key removal in depressed position | |||
Selector Switch — Knob & Key Operated
|
|
|
| Knob Selector Switch Cat. No. 800G-SM3 |
Key Operated Switch Cat. No. 800G-KSM33H |
2-Postion Target Table
| Contact Type |
|
|
| N.O. | O | X |
| N.C. | X | O |
3-Position Target Table
| Contact Type | Pos. on Latch or Base |
|
|
|
| N.O. | Top | O | O | X |
| Bottom | X | O | O | |
| N.C. | Top | X | X | O |
| Bottom | O | X | X | |
| Operator Style | Positions/Functions | Knob Selector Switch |
| Cat. No. | ||
| 2-Position | Maintained | 800G-SM2 |
| 3-Position | S→M←S | 800G-SB3 |
| S→M M | 800G-SL3 | |
| Maintained | 800G-SM3 | |
| M M←S | 800G-SR3 | |
| Operator Style | Positions/Functions | Key Removal Position | Key Operated Switch |
| Cat. No. | |||
| 2-Position | Maintained | All | 800G-KSM23H |
| 3-Position | S→M←S | Center | 800G-KSB34H |
| S→M M | Right/center | 800G-KSL37H | |
| Maintained | All | 800G-KSM33H | |
| M M←S | Left/center | 800G-KSR35H | |
| 800G | – | S | M3 | |||||
| a | b | c | d |
| a | b | c | d | |||||||||
| Operator Style | No. of Positions/Functions | Key Removal | Knob Position | |||||||||
| Code | Description | Code | Description | Code | Description | Code | Description | |||||
| S | Knob | M2 | 2-position maintained | Blank | For knob selector switches | ‡ | Blank | For latch mount or base mount in horizontal Bul. 800G enclosure | ||||
| KS | Key operated | B3 | 3-position spring return left and right to center | ⋆ | 1 | Left | H | For base mount in vertical Bul. 800G enclosure | ||||
| L3 | 3-position spring return left to center | ⋆ | 2 | Right | ||||||||
| M3 | 3-position maintained | ⋆ | 3 | All | ||||||||
| R2 | 2-position spring return right to left | ⋆ | 4 | Center | ||||||||
| R3 | 3-position spring return right to center | ⋆ | 5 | Left/center | ||||||||
| ⋆ | 6 | Left/right | ||||||||||
| ⋆ | 7 | Right/center | ||||||||||
⋆ Only available with key selector (Code KS from Table a).
‡ Only available with knob selector (Code S from Table a).
Pilot Light
|
| Operator Style | Color | Cat. No. |
| Pilot Light | White | 800G-P1 |
| Green | 800G-P3 | |
| Red | 800G-P4 | |
| Yellow | 800G-P5 | |
| Blue | 800G-P6 | |
| 800G | – | P | 3 | |
| a | b |
| a | b | |||
| Operator Style | Lens Color | |||
| Code | Description | Code | Color | |
| P | Pilot light | 1 | White | |
| 3 | Green | |||
| 4 | Red | |||
| 5 | Yellow | |||
| 6 | Blue | |||
Ammeter
|
| Base Mount | |
| Amperage⋆ | Cat. No. |
| 1 A | 800G-AMP1B |
| 5 A | 800G-AMP5B |
| ⋆ Unit ships with a percent scale plate. | |
Enclosures — Plastic‡
Base mount only
|
| Type | Type | |
| M20 Threaded Hole — Bottom Feed | 3/4 in. Conduit — Bottom Feed | |
| Cat. No. | Cat. No. | |
| 1-Hole | 800G-1P | 800G-1P2 |
| 2-Hole | 800G-2P | 800G-2P2 |
| 3-Hole | 800G-3P | 800G-3P2 |
| Ammeter Station | 800G-3PA | 800G-3PA2 |
| ‡ Bul. 800G enclosures are base mount only and will only work with base mount contact blocks. | ||
| 800G | – | 3 | P | T | 1 | |||
| a | b | c | d |
| a | b | c | d | |||||||
| Enclosure Size | Enclosure Style | Conduit Entry | Conduit Style | |||||||
| Code | Description | Code | Description | Code | Description | Code | Description | |||
| 1 | 1-hole | P | Plastic | Blank | Bottom feed | Blank | M20 x 1.5 threaded hole | |||
| 2 | 2-hole | PA | Plastic with ammeter window⋆ | T | Top feed | 1 | 1/2 in. NPT conduit hub | |||
| 3 | 3-hole | F | Through feed | 2 | 3/4 in. NPT conduit hub | |||||
| X | No holes | 3 | M20 plastic cable gland | |||||||
| 4 | M25 plastic cable gland | |||||||||
| 5 | M20 blind plug | |||||||||
| 6 | M25 blind plug | |||||||||
| 7 | 2 M20 plastic cable glands | |||||||||
| 8 | M20 metal cable gland | |||||||||
| 9 | M25 metal cable gland | |||||||||
| 0 | 2 M20 metal cable glands | |||||||||
⋆ Only available in Enclosure Size 3.
Back-of-Panel Components
Latch and Base Mount Contact Block
|
|
|
| Base Mount Cat. No. 800G-XBA |
Latch Mount Screw Termination Cat. No. 800G-XLSA |
| Base Mount | Latch Mount | ||
| Contact | Screw Termination |
Screw Termination |
Cable Termination |
| Cat. No. | Cat. No. | Cat. No. | |
| 1 N.O. - 1 N.C. | 800G-XBA | 800G-XLSA | 800G-XLC3A |
| 2 N.O. | 800G-XBM | 800G-XLSM | 800G-XLC3M |
| 2 N.C. | 800G-XBN | 800G-XLSN | 800G-XLC3N |
| 800G | – | XLS | A | |
| a | b |
| a | b | |||
| Contact Block/Latch Type | Contact Configuration | |||
| Code | Description | Code | Description | |
| XB | Base mount | A | 1 N.O. - 1 N.C. | |
| XLS | Latch mount with screw termination | M | 2 N.O. | |
| XLC3 | Latch mount with 3 m (9.84 ft) cable termination | N | 2 N.C. | |
Latch Mount and Base Mount Power Module⋆
|
|
|
| Base Mount Cat. No. 800G-DBG |
Latch Mount Screw Termination Cat. No. 800G-DLSG |
| Color | Base Mount | Latch Mount | |
| Screw Termination |
Screw Termination |
Cable Termination |
|
| Cat. No. | Cat. No. | Cat. No. | |
| White | 800G-DBW | 800G-DLSW | 800G-DLC3W |
| Green | 800G-DBG | 800G-DLSG | 800G-DLC3G |
| Red | 800G-DBR | 800G-DLSR | 800G-DLC3R |
| Yellow | 800G-DBY | 800G-DLSY | 800G-DLC3Y |
| Blue | 800G-DBB | 800G-DLSB | 800G-DLC3B |
| Note:Cable termination length is three meters. | |||
| 800G | – | DB | G | |
| a | b |
| a | b | |||
| Power Module/Latch Type | Color | |||
| Code | Description | Code | Description | |
| DB | Base mount | W | White | |
| DLS | Latch mount with screw termination | G | Green | |
| DLC3 | Latch mount with 3 m (9.84 ft) cable termination | R | Red | |
| Y | Yellow | |||
| B | Blue | |||
⋆ Bul. 800G LED modules can only be powered from dry contact circuits (with no leakage current in the OFF state).
Power Module with Contact Block⋆
|
| Color | Latch Mount | |
| 1 N.O. | 1 N.C. | |
| Cat. No. | Cat. No. | |
| White | 800G-DLSWXK | 800G-DLSWXL |
| Green | 800G-DLSGXK | 800G-DLSGXL |
| Red | 800G-DLSRXK | 800G-DLSRXL |
| Yellow | 800G-DLSYXK | 800G-DLSYXL |
| Blue | 800G-DLSBXK | 800G-DLSBXL |
| Note:For use with illuminated push button. | ||
| 800G | – | DB | G | XK | ||
| a | b | c |
| a | b | c | |||||
| Power Module/Latch Type | Color | Contact Configuration | |||||
| Code | Description | Code | Description | Code | Description | ||
| DB | Base | W | White | XK | 1 N.O. | ||
| DLS | Latch mount with screw termination | G | Green | XL | 1 N.C. | ||
| DLC3 | Latch mount with 3 m (9.84 ft) cable termination | R | Red | ||||
| Y | Yellow | ||||||
| B | Blue | ||||||
⋆ Bul. 800G LED modules can only be powered from dry contact circuits (with no leakage current in the OFF state).