Catalogs > Industrial Controls Catalog > Push Buttons > Hazardous Location > Bulletin 800G Hazardous Location Push Buttons
Bulletin 800G Hazardous Location Push Buttons
| Introduction |  |
Standards Compliance | |
Product Selection | |
Accessories | |
Specifications | |
Approximate Dimensions | |
Standard Assembled Stations
| Mechanical Ratings | ||
| Protection Type |
|
II 2G Ex edm IIC T6 AEx edm IIC T6 Ex edm IIC T6 |
| Certification | PTB 01 ATEX 1036 UL E10314 CE0044 | |
| Rated Insulation Voltage | Max. 690V AC | |
| Rated current | Dependent on components used | |
| Degree of Protection | IP66, Type 4X: -20…+60 °C (-4…+140 °F) IP54: -55…+60 °C (-67…+140 °F) |
|
| Enclosure Material | ||
| Enclosure | Thermoplastic | |
| Seals | EPDM | |
| Cable Glands | ||
| Standard | Plastic M20 x 1.5 for cable Æ 6…12 mm | |
| Custom | Plastic M25 for cable Æ 13…18 mm 1/2 in. NPT conduit 3/4 in. NPT conduit |
|
| Wire/Cable Size | 2.5 mm2 (12 AWG) stranded max. | |
| PE Conductor Terminals | 4 x 2.5 mm2 (12 AWG) stranded max. | |
| Storage Temperature | -55…+70 °C (-67…+158 °F) | |
| Operational Temperature Range | -55…+60 °C (-67…+140 °F) | |
Back-of-Panel
Contact Block
| Electrical Ratings | ||||||
| Screw Termination | Cable Termination | |||||
| Rated Insulation Voltage | 690V | 400V (Limited by the cable, not the contacts) | ||||
| Rated Voltage | 250V (per ATEX certificates) | 24V | 250V (per ATEX certificates) | 24V | ||
| Rated Operating Currents | 16 A | 10 A | 1 A | 16 A | 10 A | 1 A |
| Utilization Category | AC-12 | AC-15 | DC-13 | AC-12 | AC-15 | DC-13 |
| Thermal Continuous Current | 16 A at 40 °C (104 °F), 11 A at 60 °C (140 °F) | 16 A at 40 °C (104 °F), 11 A at 60 °C (140 °F) | ||||
| Contact Rating per UL 508 | A600 | P600 | A600 | P600 | ||
| Max. Rated Voltage per UL Contact Rating | 600V | 600V | 600V | 600V | ||
| Max. “Make” Current at Rated Voltage per UL Contact Rating |
12 A | 0.2 A | 12 A | 0.2 A | ||
| Max. “Break” Current at Rated Voltage per UL Contact Rating |
1.2 A | 0.2 A | 1.2 A | 0.2 A | ||
| Thermal Continuous Test Current per UL Contact Rating |
10 A | 5 A | 10 A | 5 A | ||
| Short Circuit Protection | 10 A Slow Blow, Type DT, gl | 10 A Slow Blow, Type DT, gl | ||||
| Mechanical Ratings | ||||||
| Protection Type |
|
II 2G Ex de IIC Class I, Zone 1 AEx de IIC Class I, Zone 1 Ex de IIC |
|
II 2G Ex d IIC T6 Class I, Zone 1 AEx d IIC T6 Class I, Zone 1 Ex d IIC T6 |
||
| Certification | PTB 01 ATEX 1040U UL E10314 | PTB 01 ATEX 1039X UL E10314 | ||||
| Contact Options | 1 N.O. - 1 N.C. 2 N.O. 2 N.C. |
1 N.O. - 1 N.C. 2 N.O. 2 N.C. |
||||
| Contact Material | AgSnO2 | AgSnO2 | ||||
| Housing Material | Thermoplastic | Thermoplastic | ||||
| Physical Shock Resistance | DIN IEC 68 part 2-27, 30 g 18 ms | DIN IEC 68 part 2-27, 30 g 18 ms | ||||
| Design Life | 1 000 000 cycle mechanical life | 1 000 000 cycle mechanical life | ||||
| Operating Force (Maximum) | 22.2 N (5 lb) to open N.C. 15.6 N (3.5 lb) to close N.O. 28.9 N (6.5 lb) full travel |
22.2 N (5 lb) to open N.C. 15.6 N (3.5 lb) to close N.O. 28.9 N (6.5 lb) full travel |
||||
| Temperature (Storage/Transport) | -55…+70 °C (-67…+158 °F) | -55…+70 °C (-67…+158 °F) | ||||
| Operational Temperature Range | -55…+60 °C (-67…+140 °F) | -55…+60 °C (-67…+140 °F) | ||||
| Wire/Cable Size | 2.5 mm2 (12 AWG) stranded max. | 3 m (9.8 ft) long cable 4 x 1.5 mm2 (9.1 mm/0.36 in. OD) |
||||
| Degree of Protection | IP20, with operators and enclosure IP66 | With operators IP67 | ||||
| Mounting | Base Mount: Secures to rail integral to enclosure base Panel Mount: Secures to operator with integral latch |
Panel Mount: Secures to operator with integral latch | ||||
Power Module
| Electrical Ratings | ||||
| Screw Termination | Cable Termination | |||
| Rated Insulation Voltage | 300V | 300V | ||
| Power Consumption | £ 1 W | £ 1 W | ||
| Lamp | Multi-LED (Red, Yellow, Green, White, Blue) | Multi-LED (Red, Yellow, Green, White, Blue) | ||
| Rated Voltage | 12…60V DC 12…250V AC |
24…60V DC 24…60V AC and 110…250V AC |
||
| Mechanical Ratings | ||||
| Screw Termination | Cable Termination | |||
| Protection Type |
|
II 2G Ex de IIC Class I, Zone 1 AEx de IIC Class I, Zone 1 Ex de IIC |
|
II 2G Ex d IIC T6 Class I, Zone 1 AEx d IIC T6 Class I, Zone 1 Ex d IIC T6 |
| Certifications | PTB 01 ATEX 1037U UL E10314 | PTB 01 ATEX 1038X UL E10314 | ||
| Housing Material | Thermoplastic | Thermoplastic | ||
| Physical Shock Resistance | DIN IEC 68 part 2-27, 30 g, 18 ms | DIN IEC 68 part 2-27, 30 g, 18 ms | ||
| Design Life | 100 000 hours | 100 000 hours | ||
| Storage/Transport Temperature | -55…+70 °C (-67…+158 °F) | -55 …+70 °C (-67…+158 °F) | ||
| Ambient Temperature Range | -55…+60 °C (-67…+140 °F) | -55…+60 °C (-67…+140 °F) | ||
| Wire/Cable Size | 2.5 mm2 (12 AWG) stranded max. | 3 m (9.8 ft) long cable 4 x 1.5 mm2 (9.1 mm/0.36 in. OD) |
||
| Degree of Protection | IP20, with operators and enclosure IP66 | With operators IP67 | ||
| Mounting | Base Mount: Secures to rail integral to enclosure base Panel Mount: Secures to operator with integral latch |
Panel Mount: Secures to operator with integral latch | ||
Power Module/Contact Block Combination
| Electrical Ratings | ||||
| Screw Termination | Cable Termination | |||
| Rated Insulation Voltage | 300V | 300V | ||
| Power Consumption | £ 1 W | £ 1 W | ||
| Lamp | Multi-LED (red, yellow, green, white, blue) | Multi-LED (red, yellow, green, white, blue) | ||
| Rated Voltage | 24…48V DC 24…250V AC |
24…48V DC 24…250V AC |
||
| Contact Rating per UL 508 | A600 | P600 | A600 | P600 |
| Thermal Continuous Current | 1 A | 0.25 A | 1 A | 0.25 A |
| Max. Rated Voltage | 600V | 600V | 600V | 600V |
| Mechanical Ratings | ||||
| Screw Termination | Cable Termination | |||
| Protection Type |
|
II 2G EEx de IIC Class I, Zone 1 AEx de IIC Class I, Zone 1 Ex de IIC |
|
II 2G EEx d IIC T6 Class I, Zone 1 AEx d IIC T6 Class I, Zone 1 Ex d IIC T6 |
| Certifications | PTB 01 ATEX 1037U UL E10314 | PTB 01 ATEX 1038X UL E10314 | ||
| Housing Material | Thermoplastic | Thermoplastic | ||
| Physical Shock Resistance | DIN IEC 68 part 2-27, 30 g, 18 ms | DIN IEC 68 part 2-27, 30 g, 18 ms | ||
| Design Life | 100 000 hours | 100 000 hours | ||
| Storage/Transport Temperature | -55…+70 °C (-67…+158 °F) | -30 …+70 °C (-22…+158 °F) | ||
| Ambient Temperature Range | -55…+60 °C (-67…+140 °F) | -30…+60 °C (-22…+140 °F) | ||
| Wire/Cable Size | 2.5 mm2 (12 AWG) stranded max. | 3 m (9.8 ft) long cable 4 x 1.5 mm2 (9.1 mm/0.36 in. OD) |
||
| Degree of Protection | IP20, with operators and enclosure IP66 | With operators IP67 | ||
| Mounting | Base Mount: Secures to rail integral to enclosure base Panel Mount: Secures to operator with integral latch |
Panel Mount: Secures to operator with integral latch | ||
Front-of-Panel Operators
| Mechanical Ratings | ||||||||
| Device | Operational Temperature |
Operating Force ⋆ |
Mechanical Design Life |
Impact Resistance |
Materials | Ingress Protection |
Ex Protection Type | |
| Push Button | -55…+70 °C (-67…+158 °F) |
6.7 N (1.5 lb) |
1 000 000 cycles | 7 N•m | Thermoplastic Housing EPDM Seals |
IP66 : -20…+70 °C (-4…+158 °F) IP54: -55…-20 °C (-67…-4 °F) Type 4X: -20…+70 °C (-4…+158 °F) |
|
II 2G EEx e II PTB 01 ATEX 1035U UL E10314 |
| Selector Switch | -55…+70 °C (-67…+158 °F) |
— | ||||||
| Key Release Push Button |
-55…+70 °C (-67…+158 °F) |
15.6 N (3.5 lb) |
||||||
| Key Release Mushroom |
-55…+70 °C (-67…+158 °F) |
15.6 N (3.5 lb) |
||||||
| Mushroom | -55…+70 °C (-67…+158 °F) |
6.7 N (1.5 lb) |
||||||
| E-Stop | -55…+70 °C (-67…+158 °F) |
44.5 N Push/ 89 N Pull (10 lb Push/ 20 lb Pull) |
6000 cycles | |||||
| Pilot Light (Red, Yellow, White, Green, Blue) |
-55…+70 °C (-67…+158 °F) |
— | N/A | 4 N•m | ||||
| Hole Plug | -55…+70 °C (-67…+158 °F) |
— | N/A | 7 N•m | ||||
| Illuminated Push Button |
-55…+70 °C (-67…+158 °F) |
6.7 N (1.5 lb) |
1 x 106 | 7 N•m | ||||
| Key Selector Switch | -55…+70 °C (-67…+158 °F) |
— | 1 000 000 cycles | 7 N•m | ||||
| ⋆ Does not include contact block. | ||||||||