Hazardous Location

Catalogs > Industrial Controls Catalog > Push Buttons > Hazardous Location > Bulletin 800R Hazardous Location Push Buttons

Bulletin 800R Hazardous Location Push Buttons

Product Selection

Complete Assembled Stations

Class I, Division 2/Zone 2

Push button operators for Class I, Division 2/Zone 2 are offered in Bulletin 800T/H, Bulletin 800T/800H 30.5 mm Push Buttons.

Surface Mount Cat. No. 800R-1TA		Stainless Steel Booted Operator Station Cat. No. 800R-1HA4T		Stainless Steel Bootless Operator Station Cat. No. 800R-1HA4TL		Rosite Booted Operator Station Cat. No. 800R-1HA4R		Rosite Bootless Operator Station Cat. No. 800R-1HA4RL

Operator	Contact Symbol		Contact Action	Button Type	Button Color	Legend Marking	Cast Aluminum Enclosures⋆	Stainless Steel Enclosures‡	Rosite Glass Polyester Enclosures‡
							Surface Mount	Bootless Operator Station§
							Cat. No.	Cat. No.	Cat. No.
One Push Button		1 N.O. - 1 N.C.	Momentary	Flush	Green	START	800R-1TB	800R-1HB4TL	800R-1HB4RL
				Extended	Red	STOP	800R-1TA	800R-1HA4TL	800R-1HA4RL
				Flush	Black	No Legend	800R-1TX	800R-1HX4TL	800R-1HX4RL
Two Push Buttons		1 N.O. - 1 N.C. Each Button	Momentary	Flush Extended	Green Red	START STOP	800R-2TA	800R-2HA4TL	800R-2HA4RL
				Flush Flush	Black Black	No Legend No Legend	800R-2TX	800R-2HX4TL	800R-2HX4RL
One Pilot Light, Two Push Buttons		1 N.O. - 1 N.C. Each Button	Momentary	120V AC Flush Extended	Red Green Red	No Legend START STOP	800R-2TAR	800R-2HAR4TL	800R-2HAR4RL
				120V AC Flush Flush	Red Black Black	No Legend No Legend No Legend	800R-2TXR	800R-2HXR4TL	800R-2HXR4RL
3-Position Selector Switch		1 N.O. - 1 N.C.	Maintained	Knob Lever	Black with white insert	HAND OFF AUTO	800R-R3TA	800R-R3HA4TL	800R-R3HA4RL
				Knob Lever	Black with white insert	No Legend	800R-R3TX	800R-R3HX4TL	800R-R3HX4RL
One Push Button		1 N.O. - 1 N.C.	Maintained	Push-Pull/Twist	Red	EMRG.STOP	800R-1TAM	800R-1HAM4TL	800R-1HAM4RL
Two Push Buttons		1 N.O. - 1 N.C. Each Button	Maintained	Flush Extended	Green Red	START STOP	800R-2TAM	800R-2HAM4TL	800R-2HAM4RL
				Flush Flush	Black Black	No Legend No Legend	800R-2TXM	800R-2HXM4TL	800R-2HXM4RL
⋆ Type 4/13.
‡ Type 4/4X/13.
§ To order a control station with booted operators, remove the L from the end of the catalog number. Example: Cat. No. 800R-1HA4TL becomes Cat. No. 800R-1HA4T.

Custom-Built Stations



Description
The tables on Class I, Division 2/Zone 2 list the most commonly used push button stations. Stations not listed in the table may be ordered as custom-built stations.

Cat. No.
The cat. no. used to identify custom-built Bulletin 800R push button stations, which are built at the factory, will be cat. nos. listed for the enclosure only, except letter W will be substituted for the letter Z and with a station serial number.

Ordering Information
The following information is required when ordering custom built push button stations.

1. Cat. no. of enclosure.

2. Cat. no. of control units.

3.  Legend plate cat. no. and/or marking for each unit.

4. Specify vertical or horizontal mounting.

5.  Specify desired operator mounting sequence. Inclusion of a sketch is recommended. If no information is given, standard configuration will be used.

Enclosures Only

Die Cast Cat. No. 800R-2TZ		Stainless Steel Cat. No. 800R-2HZ4		Rosite Glass Polyester Cat. No. 800R-2HZ4R

Units⋆	Die Cast (Type 4/13)	Stainless Steel (Type 4/4X/13)	Rosite Glass Polyester (Type 4/4X/13)
	Cat. No.	Cat. No.	Cat. No.
1	800R-1TZ	800R-1HZ4	800R-1HZ4R
2	800R-2TZ	800R-2HZ4	800R-2HZ4R
3	800R-3TZ	800R-3HZ4	800R-3HZ4R
4	800R-4TZ	800R-4HZ4	800R-4HZ4R
5	—	800R-5HZ4	—
6	800R-6TZ	800R-6HZ4	800R-6HZ4R
⋆ Number of units that can be mounted in enclosure.
‡ Extra deep. Accomodates two levels of stackable sealed switch contact blocks.
Note:Enclosure and conduit dimensions are detailed on Approximate Dimensions and Shipping Weights, except for the fiberglass enclosures, which are found on Enclosures (Bul. 800H Only), Continued.