Bulletin 800Z Zero-Force™ Touch Buttons
| Product Overview |
|
Bulletin 800Z — Zero-Force Touch Buttons™
Build a Catalog Number
Description
Bulletin 800Z Zero-Force Touch Buttons are ideally suited for use in two-hand machine control systems and highly repetitive applications.
Ergonomic Design — The contour shape fits the palm of the hand for ease of operation and helps deter attempts to defeat two-hand control.
Zero Force to Operate — The electronic design with two interlinked capacitive sensors in offset planes provides increased sensitivity and good ability for distinguishing between a person's hand, even through most industrial gloves, versus most foreign objects.
Features
- Internationally rated ergonomic touch buttons
- Zero force to operate
- EMC protection
- Diagnostic LEDs
- Replaceable relays (heavy industrial design)
|
ATTENTION: Not recommended for use in applications where there is high probability for exposure to liquid (e.g., cutting fluid) on the sensing surface area. |
See Specifications for Standards Compliance and Certifications.
Product Selection
General Purpose Line — Momentary Touch Buttons
|
|
|
| General Purpose Cat. No. 800Z‑GF2Q5 |
General Purpose Cat. No. 800Z‑GL3Q5B |
| Mounting Hole Size | Input Voltage | Output Type | Electrical Connection | No Guard | Black Guard |
| Cat. No. | Cat. No. | ||||
| 30.5 mm | 100...240V AC | Relay Output | 5-Pin QD | 800Z-GF3Q5 | 800Z-GF3Q5B |
| 6 ft Cabled — 5-Wire | 800Z-GF3065 | 800Z-GF3065B | |||
| 10...40V DC and 20...30V AC | Relay Output | 5-Pin QD | 800Z-GL3Q5 | 800Z-GL3Q5B | |
| 6 ft Cabled — 5-Wire | 800Z-GL3065 | 800Z-GL3065B | |||
| 22.5 mm | 100...240V AC | Relay Output | 5-Pin QD | 800Z-GF2Q5 | 800Z-GF2Q5B |
| 6 ft Cabled — 5-Wire | 800Z-GF2065 | 800Z-GF2065B | |||
| 10...40V DC and 20...30V AC | Relay Output | 5-Pin QD | 800Z-GL2Q5 | 800Z-GL2Q5B | |
| 6 ft Cabled — 5-Wire | 800Z-GL2065 | 800Z-GL2065B | |||
Use the configurator below to build a Bulletin 800Z touch button to suit your application.
| 800Z | – | G | L | 3 | 065 | B | ||||
| a | b | c | d |
| a | b | c | d | |||||||
| Input Voltage and Output Type § | Mounting Hole Size ♣ | Electrical Connection | Guard Option | |||||||
| Code | Description | Code | Description | Code | Description | Code | Description | |||
| Relay Output | Sourcing Output ⋆ | |||||||||
| L | Input: 10…40V DC and 20…30V AC Output: relay |
2 | 22.5 mm | Q4 | 4-pin QD | Blank | No guard | |||
| F | Input: 100…240V AC Output: relay |
3 | 30.5 mm | 064 | 6 ft (1.8 m) cabled | B | Black guard | |||
| Transistor Output | 244 | 24 ft (7.2 m) cabled | Y | Yellow guard | ||||||
| P | 10…30V DC PNP (sourcing) output |
Relay Output ‡ | ||||||||
| Q5 | 5-pin QD | |||||||||
| 065 | 6 ft (1.8 m) cabled | |||||||||
| 245 | 24 ft (7.2 m) cabled | |||||||||
⋆ These devices are transistor outputs.
‡ These devices have separate N.O. and N.C. output relays with a shared common.
§ Safety relays should be used in conjunction with two relay output type Zero-Force Touch Buttons™ in 2-hand control applications. Order separately, safety relay 440R-D23171 for 24V, 440R-D23169 for 120V, 440R-D23168 for 240V.
♣ 22.5 mm touch buttons use micro connector, 30.5 mm touch buttons use mini connector.
Heavy Industrial Line — Momentary Touch Buttons
|
|
|
| Heavy Industrial Cat. No. 800Z‑HF1 |
Heavy Industrial Cat. No. 800Z‑HL1Y |
| Button Type | Input Voltage | Output Type | Electrical Connection | No Guard | Yellow Guard |
| Cat. No. | Cat. No. | ||||
| Flush Mount | 10...40V DC and 20...30V AC | Relay Output | Terminal Block | 800Z-HL1 | 800Z-HL1Y |
| 100...240V AC | Relay Output | Terminal Block | 800Z-HF1 | 800Z-HF1Y | |
Use the configurator below to build a Bulletin 800Z touch button to suit your application.
| 800Z | – | H | L | 1 | Y | |||
| a | b | c |
| a | b | c | |||||
| Voltage ‡ | Mounting Type ⋆ | Guard Option | |||||
| Code | Description | Code | Description | Code | Description | ||
| L | Input: 10…40V DC and 20…30V AC Output: relay |
1 | Flush mounting | Blank | No guard | ||
| F | Input: 100…240V AC Output: relay |
Y | Yellow guard | ||||
⋆ Heavy industrial devices have an 8-position terminal block connection. See wiring diagrams on Heavy Industrial Line for details.
‡ Safety relays should be used in conjunction with two relay output type Zero-Force Touch Buttons in 2-hand control applications. Order separately, safety relay 440R-D23171 for 24V, 440R-D23169 for 120V, 440R-D23168 for 240V.
Quick Disconnect Cables
|
|
|
| PD | PD |
| 889 | D | – | F | 4A | C-2 | |||
| a | b | c | d |
| a | b | c | d | |||||||
| Mounting Hole Size | QD Type | Pin Style | Cable Length/Type | |||||||
| Code | Description | Code | Description | Code | Description | Code | Description | |||
| D | 22.5 mm (micro) | F | Straight QD cable | 4A | 4 pin | C-2 | 2 m (micro) | |||
| N | 30.5 mm (mini) | R | Right angle QD cable | 5A | 5 pin § | C-5 | 5 m (micro) | |||
| C-10 | 10 m (micro) | |||||||||
| E-6F | 6 ft. (mini) | |||||||||
| E-12F | 12 ft. (mini) | |||||||||
| E-20F | 20 ft. (mini) | |||||||||
§ No right angle QD cable (micro) for 5-pin (Cat. No. 889D-R5A_).
Accessories
Accessories — General Purpose
|
|
Description | Cat. No. | |
| Guards These guards help protect against accidental activation of the touch button surface and protect it from damage. Can be used for both the 22.5 mm and 30.5 mm mounted products. |
Yellow Plastic | 800Z-G3AG1 | ||
| Cat. No. 800Z‑G3AG1 | Cat. No. 800Z‑G3AG2 | Black Plastic | 800Z-G3AG2 | |
|
Mounting Ring Nut for 22.5 mm Holes Used on 22.5 mm devices. |
800Z-G2AH1 | ||
| Plastic Mounting Kit Cat. No. 800Z‑G2AH1 |
||||
|
Mounting Ring Nut for 30.5 mm Hole Used on 30.5 mm devices. |
800Z-G3AH1 | ||
| Plastic Mounting Kit Cat. No. 800Z‑G3AH1 |
||||
|
30.5 mm Swivel/Tilt Mounting Assembly This bracket allows you to orient the touch button in any position. It can be mounted on any vertical or horizontal surface. Compatible with 30.5 mm mounting only. |
2.25 in. (57 mm) | 60-2681 | |
| Swivel Assembly Cat. No. 60‑2439 |
1.15 in. (29 mm) | 60-2439 | ||
|
30.5 mm to 22.5 mm Hole Size Adapter This adapter allows a 22.5 mm push button operator to be installed in a panel with existing 30.5 mm mounting holes. |
Metal | 800F-AHA1 | |
| Cat. No. 800E‑AHA1 | Black Metal | 800E-AHA2 | ||
Accessories — Heavy Industrial
|
Description | Cat. No. | ||
| Guard This guard helps protects against accidental activation of the touch surface and protects it from damage. Mounting screws are included. |
Yellow Plastic | 800Z-HAG1 | ||
| Cat. No. 800Z‑HAG1 | ||||
|
|
Mounting Bases The heavy industrial line products mount directly on these bases. The conduit hub(s) come with a 3/4 inch opening. |
1 | 800P-B1 |
| Single Hub Base Cat. No. 800P‑B1 |
Double Hub Base Cat. No. 800P‑B2 |
2 | 800P-B2 | |
|
Adapter This adapter is used if mounting touch button onto a 4-1/2 in. x 2-3/8 in. (114.3 x 60.3 mm) enclosure pattern. |
800P-N150 | ||
| Cat. No. 800P‑N150 | ||||
|
Replacement Relay Note: Package quantity of 2. |
10...264V | 800Z-N12 | |
| Cat. No. 800Z‑N12 | ||||
|
Replacement Screws | Guard-to-Base Mounting Note: package quantity of 4 |
800Z-HAH1 | |
| Cat. No. 800Z‑HAH1 | Base Mounting Note: package quantity of 4 |
800Z-HAH2 | ||
Wiring Diagrams — Touch Button Terminations
General Purpose Line
Electrical Connections: 10...40V DC and 20...30V AC Input Voltage (Relay Output); 100...240V AC Input Voltage (Relay Output)
Note: Separate N.O. and N.C. output relays with shared common.
5-Conductor Cabled (Relay Output)
For 800Z-GL_ _ _
For 800Z-GF_ _ _
|
Electrical Connections: 10...30V DC Input Voltage (Transistor Output); 150 mA Max. per Circuit Output
4-Conductor Cabled
|
Heavy Industrial Line
|
Specifications
Mechanical Ratings
| Description | General Purpose Line (800Z-G) |
Heavy Industrial Line (800Z-H) |
| Mechanical Ratings | ||
| Vibration Endurance | Tested @ 10 G, 1.52 mm displacement | |
| Mechanical Shock | Tested @ 100 G (mechanical durability) | |
| Degree of Protection |
Type 4/4X/13 IP66 1200 psi Washdown |
Type 4/13 IP66 |
| Operating Force | Zero | |
| Electrical Ratings | ||
| Input Voltage (Relay type) |
Low Voltage: 10…40V DC, 20…30V AC Full Voltage (800Z-GF): 100…240V AC (+10%, -15%) |
|
| Input Voltage (Solid-State type) |
Low Voltage (800Z-GN/GP): 10…30V DC | |
| Electrical Design Life (Relay type) |
Relay output 200 000 Operations @ 2 A inductive 4 A resistive |
Relay output 150 000 Operations @ 5 A inductive 2.5 A resistive |
| Degree of Protection | — | IP2X |
| Wire Range | #22…12 AWG (0.5…4 mm2) |
|
| Tightening Torque | 9 lb•in (1 N•m) | |
| On-delay/Off-delay | Off 60 ms max. On 76 ms max. | |
| Current Draw (Solid-State type) |
100 mA at 24V DC = 2.23 W (no external load) | |
| Environmental | ||
| Temperature Range (Operating) |
-25...+55 °C (-13…+131 °F) | |
| Temperature Range (Storage) |
-40...+85 °C (-40…+185 °F) | |
| Humidity | 95% RH from 25...50 °C (77…122 °F) (full operation) | |
| Materials | ||
| Housing/Guard | Valox 357 | |
| Gasket | BUNA-N | 1/16 in. Cork-BUNA-N |
| Connector | Insulator material (micro connector) = nylon Insulator material (mini connector) = PVC |
|
| Standards and Certifications | ||
| Certifications | cULus, CE, C-TICK, CSA | |
| Standards Conformity |
UL 508, CSA 22.2 No. 14, EN/IEC 60947-5-1, EN50081-2, EN61000-6-2, EN60954-1, EN60204-1 |
|
Load Life Curves for General Purpose Product Line
|
|
Load Life Curves for Heavy Industrial Line
|
|
Applications Detail
| LED Blink Rate | Diagnostic | Description |
| ** ** ** | Power Up | Device touched during power up. Device will resume 10 seconds after removal of hand. |
| *** *** *** | Noise Detection | Device detected an unacceptable level of noise (>20 V/m). Device will resume once noise subsides. |
| **** **** **** | Margin Detection | A conductive film is building up on the sensing surface. Device will resume once cleared. |
Approximate Dimensions
Dimensions in inches (millimeters). Dimensions are not intended to be used for manufacturing purposes.
General Purpose
|
General Purpose With Guard
|
|
Heavy Industrial
|
|
Heavy Industrial With Guard
|
|
Cutout and Mounting Screw Locations for a Flush Mounted Cover
|
