Bulletin 800P Palm-Operated Push Buttons
| Product Overview |
|
Bulletin 800P — Palm-Operated Push Buttons
Build a Catalog Number
The Bulletin 800P palm-operated push button is designed for applications requiring electromechanical operation for safety, resistance to RFI, and an ergonomically sensitive design to reduce risk factors associated with cumulative trauma disorders. Bulletin 800P units with articulated operation offer reduced operating force over standard drive units by permitting the button head to tilt for added comfort and mechanical advantage. Bulletin 800P operators are intended for applications requiring two-hand control wiring, per OSHA standards.
Standards Compliance and Certifications
UL 508
CSA 22.2, No 14
UL Listed —File: E14840
Guide: NKCR
CSA Certified: LR1234
CE Compliant
Product Selection
Palm-Operated Push Buttons
|
|
|
| Palm-Operated Flush Mount Button Cat. No. 800P‑F2CA |
Palm-Operated Surface Mount with Guard Cat. No. 800P‑S2CG1A |
| Operation Type | Contact Type | Guard Option | Flush Mounting | Surface Mounting |
| Cat. No. | Cat. No. | |||
| Articulated | 1 N.O. - 1 N.C. | None | 800P-F2CA | 800P-S2C1A |
| Guard | 800P-F2CGA | 800P-S2CG1A | ||
| 2 N.O. - 2 N.C. | None | 800P-F2CB | 800P-S2C1B | |
| Guard | 800P-F2CGB | 800P-S2CG1B | ||
| Standard Drive | 1 N.O. - 1 N.C. | None | 800P-F1CA | 800P-S1C1A |
| Guard | 800P-F1CGA | 800P-S1CG1A | ||
| 2 N.O. - 2 N.C. | None | 800P-F1CB | 800P-S1C1B | |
| Guard | 800P-F1CGB | 800P-S1CG1B | ||
|
| 800P | – | S | 1 | C | G | 1 | A | |||||
| a | b | c | d | e | f |
| a | b | c | d | e | f | |||||||||||
| Operator Type | Button Operation | Button Color | Guard Option | Enclosure Openings | Contact Black | |||||||||||
| Standard | ||||||||||||||||
| Code | Description | Code | Description | Code | Description | Code | Description | Code | Description | Code | Description | |||||
| F | Flush mount | 1 | Standard drive | C | Chrome | Blank | No guard | Blank | No base⋆ | A | 1 N.O. - 1 N.C. | |||||
| S | Surface mount | 2 | Articulated | R | Red (painted) | G | Side guard — yellow | 1 | Single hub | B | 2 N.O. - 2 N.C. | |||||
| Y | Yellow (painted) | H | Die cast — grey | 2 | Double hub | PenTUFF (Low Voltage) | ||||||||||
| Code | Description | |||||||||||||||
| AV | 1 N.O. - 1 N.C. | |||||||||||||||
| BV | 2 N.O. - 2 N.C. | |||||||||||||||
⋆ Only used for flush mounted operators.
Accessories
| Description | Button Color | Cat. No. | Cat. No. | ||
| Standard | Anti-Slip | ||||
|
|
Button Covers Button covers are used to reduce possible slipping due to fluids on the operator. |
Red | 800P-NCR | 800P-NCR1 |
| Black | 800P-NCB | 800P-NCB1 | |||
| Green | 800P-NCG | 800P-NCG1 | |||
| Standard Button Cover Cat. No. 800P‑NCB |
Anti-Slip Button Cover Cat. No. 800P‑NCG1 |
Yellow | 800P-NCY | 800P-NCY1 | |
| Description | Style | Color | Cat. No. | ||
|
|
Guards These guards prevent accidental activation of the button and protect it from damage. Note:Guards are required in most two hand safety applications (See OSHA and ANSI standards). |
Side | Yellow | 800P-NBG1 |
| Die Cast | Grey | 800P-NBG | |||
| Side Guard Cat. No. 800P‑NBG1 |
Die Cast Guard Cat. No. 800P‑NBG |
Die Cast | Yellow | 800P-NBGY | |
| Description | Style | Cat. No. | |||
|
|
Bases The conduit hub(s) on these replacement mounting bases come with a 3/4 in. opening. |
Single Hub | 800P-B1 | |
| Single Hub Base Cat. No. 800P‑B1 |
Double Hub Base Cat No. 800P‑B2 |
Double Hub | 800P-B2 | ||
| Description | Enclosure | Cat. No. | |||
|
|
Adaptors These adaptor flanges are used between the operator and the mounting base, when using a non-Allen-Bradley base. |
Standard⋆ | 800P-N150 | |
| Standard Adapter Cat. No. 800P‑N150 |
FS Adaptor Cat. No. 800P‑N4 |
FS | 800P-N4 | ||
| Description | Marking | Cat. No. | |||
|
Legend Plates These legend plates can be mounted on the cover. |
Blank (Grey) | 800P-X107‡ | ||
| Blank (Red) | 800P-X129‡ | ||||
| START | 800P-X130 | ||||
| STOP | 800P-X131 | ||||
| INCH | 800P-X132 | ||||
| RUN | 800P-X133 | ||||
| RUN INCH |
800P-X134 | ||||
| Legend Plates | TOP STOP |
800P-X135 | |||
| ⋆ Horizontal mounting holes are 2-3/8 in. (60.3 mm) center-to-center. Vertical mounting holes are 4-1/2 in. (114.3 mm) center-to-center. | |||||
| ‡ To order with custom engraved text, add suffix E and supply text. One or two lines of text with maximum of 5 characters per line. | |||||
Contact Blocks
Packaged in a kit form for field installation. All necessary mounting hardware is provided with each contact block kit. Contact ratings are listed on Standard Contact Ratings.
Note:It is recommended to mount no more than four contact blocks on any one unit (maximum two blocks deep).
|
|
|
|
| Contact Type | Shallow Block‡ | PenTUFF Block‡ | Logic Reed Block§ |
| Cat. No. | Cat. No. | Cat. No. | |
| 1 N.O. | 800T-XD1 | 800T-XD1V | 800T-XD1R |
| 1 N.C. | 800T-XD2 | 800T-XD2V | 800T-XD2R |
| 1 N.O. - N.C. | 800T-XA | 800T-XAV | 800T-XAR |
| Note:Contact blocks with normally closed contacts meet direct drive positive opening standard requirements. | |||
| § Logic Reed blocks can be physically mounted on a Bul. 800P operator, but this combination is not UL Listed for Class 1 Div 2 hazardous applications. | |||
| ‡ For contact ratings, see Standard Contact Ratings. | |||
Specifications
Specifications⋆
| Electrical Ratings | ||
| Dielectric Strength | 2200V for one minute | |
| Electrical Design Life Cycles | 1 000 000 at maximum rated load 200 000 at maximum rated load (Logic Reed) |
|
| Mechanical Ratings | ||
| Vibration | 10…2000 Hz 1.52 mm displacement (peak-to-peak) 10 G max. | |
| Shock | Mechanical shock at 1/2 cycle sine wave for 11 ms | |
| Contact Fragility | 25 G 9 G 6 G |
800T-XA1, -XA2, -XD1, -XD4, -XD2R, contact blocks 800T-XA, -XA4, -XD2, -XD3, -XAR, -XAV contact blocks 800T-XD1R No damage at 100 G all contact blocks |
| Degree of Protection | Type 1, 12, 4/13; watertight/oiltight 529 IP65 | |
| Mechanical Design Life Cycles | Push Buttons | 1 000 000 minimum |
| Contact Operation | Shallow Contact Block Logic Reed |
Slow, double make and break Snap action |
| Typical Operating Forces | Articulated | 800T-XD1 and 800T-XD4 contact blocks 3.7 lb maximum at center of button, 2.7 lb at perimeter |
| Standard Drive | 3.7 lb | |
| Environmental | ||
| Temperature Range | Operating Storage |
+32…+131 °F (0…+55 °C) -40…+185 °F (-40…+85 °C) |
| Note: Operating temperatures at 0 °C (32 °F) are based on the absence of freezing moisture and liquids. | ||
| ⋆ Performance Data — See Performance Data. | ||
Standard Contact Ratings
(IEC 947-5-1) (NEMA ICS 2-125) Maximum continuous current Ith
10 A. Bulletin 800P units have control circuit ratings with 800T-XA1, -XD1, -XD4, -XA2, -XA, -XA4, -XD2, and -XD3 contact blocks as follows:
| Maximum Operational Volts Ue |
Utilization Category | Rated Operational Currents | |||
| IEC | NEMA | Volts Ue | Make | Break | |
|
|
||||
| AC 600 | AC-15 | A600 | 120…600 72…120 24…72 |
7200VA 60 A 60 A |
720VA 720VA 10 A |
| DC 600 | DC-13 | Q600 | 28…600 24…28 |
69VA 2.5 A |
|
| (See Contact Blocks for 800T-XAR, -XD1R, -XD2R data.) | |||||
PenTUFF™ (Low Voltage) Contact Ratings
Minimum DC: 5V, 1 mA. Maximum thermal continuous current Ith 2.5 A AC/1.0 A DC. Bulletin 800P units with Cat. No. 800T‑XAV contacts have ratings as follows:
| Maximum Operational Volts Ue |
Utilization Category | Rated Operational Currents | |||
| IEC | NEMA | Volts Ue | Make | Break | |
|
|
|
||||
| AC 300 | AC-15 | C300 | 120…300 0…120 |
1800VA 15 A |
180VA 1.5 A |
| DC 150 | DC-13 | R150 | 24…150 0…24 |
28VA 1.0 A |
|
Approximate Dimensions
Dimensions in inches (millimeters). Dimensions are not intended to be used for manufacturing purposes.
Flush Mounting
|
|
Surface Mounting
|
|
Die Cast Guard (800P-NBG or 800P-NBGY)
|
Cutout and mounting screw locations for a flush mounted cover
|
