Push Buttons

Catalogs > Industrial Controls Catalog > Push Buttons > Pendant Stations

Pendant Stations

Introduction Standards Compliance and Certifications Operator Mounting & Sequence Catalog Number Explanation Product Selection
Accessories Specifications Approximate Dimensions ⋆  Custom Text Fax/Scan Sheet
Accessories

Engraved Legend Plates

Vertical   Horizontal
Click to enlarge - 800F-36VE416_lineart Click to enlarge - 800F-36HE416_lineart
Cat. No. 800F-36VE416 Cat. No. 800F-36HE416

Description Cat. No. Description Cat. No.
Blank 800F-36BE100 1-2-3 SPEED, O/H CRANE, FORWARD 800F-36♣ E411
O-I 800F-36♣ U231 1-2-3 SPEED, O/H CRANE, REVERSE 800F-36♣ E412
I-O-II 800F-36♣ U234 ALARM 800F-36♣ E413
RESET 800F-36♣ E186 HOIST, LEFT 800F-36♣ E414
START 800F-36♣ E208 HOIST, RIGHT 800F-36♣ E415
STOP 800F-36♣ E212 LIFT, DOWN 800F-36♣ E416
1-2 SPEED, HOIST, LEFT 800F-36♣ E401 LIFT, DOWN FAST 800F-36♣ E417
1-2 SPEED, HOIST, RIGHT 800F-36♣ E402 LIFT, UP 800F-36♣ E418
1-2 SPEED, LIFT, DOWN 800F-36♣ E403 LIFT, UP FAST 800F-36♣ E419
1-2 SPEED, LIFT, UP 800F-36♣ E404 O/H CRANE, FORWARD 800F-36♣ E420
1-2 SPEED, O/H CRANE, FORWARD 800F-36♣ E405 O/H CRANE, FORWARD, FAST 800F-36♣ E421
1-2 SPEED, O/H CRANE, REVERSE 800F-36♣ E406 O/H CRANE, LEFT FAST 800F-36♣ E422
1-2-3 SPEED, HOIST, LEFT 800F-36♣ E407 O/H CRANE, REVERSE 800F-36♣ E423
1-2-3 SPEED, HOIST, RIGHT 800F-36♣ E408 O/H CRANE, REVERSE, FAST 800F-36♣ E424
1-2-3 SPEED, LIFT, DOWN 800F-36♣ E409 O/H CRANE, RIGHT FAST 800F-36♣ E425
1-2-3 SPEED, LIFT, UP 800F-36♣ E410 START, ALARM 800F-36♣ E426
Custom text ‡  800F-36♣ E100⋆ 
  
♣ For vertically mounted operators, add a V to the cat. no. Example: Cat. No. 800F-36§ E186 becomes Cat. No. 800F-36VE186.
For horizontally mounted operators, add an H to the cat. no. Example: Cat. No. 800F-36§ E186 becomes Cat. No. 800F-36HE186.
⋆ Font code (K, S, L) must be selected from the following table.
‡ Please fill in the custom text fax sheet found on Custom Text Fax/Scan Sheet to ensure accuracy of legend plate engraving.

  Click to enlarge - 800F_VertMnt_sampletext Click to enlarge - 800F_HorzMnt_sampletext
Font Size Vertical Mounting (V) Horizontal Mounting (H)
Max. Characters Per Line Max. No. of Lines Max. Characters Per Line Max. No. of Lines
K (small) 16 4 9 4
S (standard) 14 4 8 4
L (large) 10 2 7 2
  

  Description Pkg. Quantity Cat. No.
Click to enlarge - pg33_800falp Plastic mounting latch 10 800F-ALP
Click to enlarge - 800FC-ALP_4c Mechanical interlock latch 1 ⋆  800FC-ALP
Click to enlarge - 800FC-AWG_4c Replacement wire guide∇  10 800FC-AWG
Click to enlarge - 800F-ATW1_GS Replacement trim washer 10 800F-ATW1
Click to enlarge - 1492-SJ5A-24_4c Insulated side jumper 50 1492-SJ5A-24
  1492-SJ5A-10
Click to enlarge - 800F_HolePlug Hole plug 1 800F-N2
Click to enlarge - 800F-X10_4c Description Type Pkg. Quantity Cat. No.
Contact block N.O. 10 800F-X10
N.C. 800F-X01
N.O. low voltage — QuadCONNECT™ 800F-X10V
N.C. low voltage — QuadCONNECT™ 800F-X01V
N.C.E.B. 800F-X01B
NOEM‡  800F-X10E
NOLM§  800F-X10N
NOEEM♦  ∆  800F-X10M
Click to enlarge - 800FC-AS3_4c Cable sleeve 3-hole (M20 x 1.5) 1 800FC-AS3
5-…9-hole (M32 x 1.5) 800FC-AS5
Click to enlarge - 800F_ProtectiveBoots2 Protective boot Extended push button 10 ♠  800F-ABE7
2-position multi‑operator ♠  800F-AUB2
Click to enlarge - 800F-AMEGY_horz_4c Narrow plastic guard Yellow 1 800F-AMEGY
Click to enlarge - 800F-31-2 Integrated LED module 24V AC/DC 10 ♣  800F-N3x
120V AC ♣  800F-N5x
  
⋆ Only for use with 1-, 2-, and 3-speed operators.
‡ First contact closure of 1- and 2-speed operators.
§ Second contact closure of 2-speed operators and third contact closure of 3-speed operators.
♦ First contact closure of 3-speed operators.
∆ For proper operation, Cat. No. 800F-X10M must be mounted in position 3 of the mechanical or standard latch.
♠ Not for use with 1-, 2-, and 3-speed operators.
♣ To complete the cat. no., replace the x with one of the following letters for the desired color: Y = Amber, R = Red, G = Green, B = Blue, W = White.
∇ Wire guides are provided with enclosures.