Specialty

Catalogs > Industrial Controls Catalog > Push Buttons > Specialty > Bulletin 800T Small Pilot Lights

Bulletin 800T Small Pilot Lights

Introduction Product Selection Accessories Approximate Dimensions
Accessories

18 mm Legend Plates

Click to enlarge - 800T-2_23-1
Type A Legend Plate
Cat. No. 800T‑N515


Description Cat. No.
Blank
Type A 800T-N515
Type B 800T-N516
With Custom Marking‡ 
Type A with Text 800T-N515E
Type B with Text 800T-N516E
  
‡ Text must be supplied.

Color Caps

Click to enlarge - 800T-2_23-2
Red Color Cap
Cat. No. 800T‑N122R


Color Cat. No.
Red 800T-N122R
Green 800T-N122G
Amber 800T-N122A
Blue 800T-N122B
White 800T-N122W
Clear 800T-N122C
  

Guard

Click to enlarge - 800T-2_23-3
Guard for Illuminated Push Buttons
Cat. No. 800T‑N226


Description Cat. No.
18 mm Guard
Provides side protection for 18 mm pilot lights. 		800T-N226
  

Custom Text Guidelines

Legend Type Number of Lines Maximum Number of Characters per Line
A 1 9
B 2 13
  

Replacement Lamps

Lamp Type Typical Current Lamp Voltage ANSI No. Cat. No.
Incandescent Full Voltage
Transformer 		150 mA/250 mA 6.3V AC 755/1866 800T-N65
Click to enlarge - 800T_800H-1_40-1 Full Voltage 80 mA 14V AC/DC 756 800T-N141
Full Voltage 70 mA 24V AC/DC 757 800T-N157
Dual Input Diode 57 mA 24V AC/DC 24 MB 800T-N180
Flashing 150 mA 6V AC/DC 267 800T-N212
Full Voltage
Resistor 		22 mA 120V AC/DC 949 800T-N169
Full Voltage
Transformer 		150 mA/250 mA 6.3V AC 755/1866 800T-N65
Neon — 2 mA 120V AC/DC B2A 609-N9
Click to enlarge - 800T_800H-1_40-2
Lamp Type Typical Current‡  Lamp Voltage Leakage Current Cat. No.
LED§  Full voltage 50 mA 6V AC 14 mA 800T-N318x♣ 
Click to enlarge - 800T_800H-1_40-3 Full Voltage 13 mA/22 mA 12V AC/DC 3 mA 800T-N362x♣ 
20 mA/21 mA 24V AC/DC 3 mA 800T-N319x♣ 
12 mA/17 mA 32V AC/DC 3 mA 800T-N363x♣ 
Click to enlarge - 800T_800H-1_40-2 9 mA/14 mA 48V AC/DC 3 mA 800T-N364x♣ 
3.3 mA/6 mA 120V AC — 800T-N320x♣ 
4.5 mA/6.2 mA 130V AC/DC 3 mA 800T-N321x♣ 
  
‡ Typical current draw varies with LED color. The first mA value is for a green or blue LED and the second mA value is for a red o r amber LED.
§ All LEDs except 120V have an internal shunt resistor for use with solid-state outputs. LEDs will not Illuminate below listed leakage current.
♣ To complete the cat. no. replace the x with the first letter of the desired color: A = Amber, G = Green, R = Red, B = Blue, or W = White. White LEDs only available in 6V and 24V.