Bulletin 800S Standard Duty Stations
| Product Overview |
|
Bulletin 800S — Standard Duty Stations
Build a Catalog Number
Bulletin 800S standard duty push button stations are used in control circuits. They offer compact size and dependable peformance.
NEMA Type 1 general purpose stations have been designed for greater operating flexibility and ease of wiring. The cover of the station contains the entire contact mechanism. Wiring terminals are located in the base. Spring type, silver plated contacts connect the two assemblies. This unique construction will speed up installation and maintenance. Operating buttons can be rotated 90° to make them suitable for horizontal mounting. This change can be made in the field.
NEMA Type 4 enclosures are die cast aluminum. Standard stations are supplied with a 3/4 in. pipe tap at the bottom.
Pilot Lights
- Push button stations with pilot lights can operate on either 120V or 240V by changing connections. A red pilot lens is supplied.
Selector Switches
- All two-position Bulletin 800S standard duty selector switch stations can be changed to three-position in the field, and the three-position selector switches can be changed to two-position. Instructions for changing are included with each station.
- In addition to the standard marking, all selector switches are supplied with adhesive backed metal legend plates, marked as follows:
OFF-ON, FOR-REV, HAND-AUTO, OPEN-CLOSE, HIGH-LOW, SUMMER-WINTER, SUMMER-OFF-WINTER, HIGH-OFF-LOW, OPEN-OFF-CLOSE, FOR-OFF-REV, HAND-OFF-AUTO.
Product Selection
Complete Assembled Stations
|
| Type 1 Flush Mount Unit⋆ — Wall Box not included | |||
| Legend Marking | Contact Symbol♦ | Grey Painted Flush Plate | Stainless Steel Flush Plate |
| Cat. No. | Cat. No. | ||
| START STOP |
|
800S-2AS | 800S-2ASQ |
| ⋆ Not rated for DC operation. | |||
|
|
|
| Cat. No. 800S-2SAP | Cat. No. 800S-2SCM |
| Momentary Contact Buttons and Pilot Light — 120V or 240V, Type 1. | Maintained Contact Buttons — Type 1 | ||||
| Legend Marking | Contact Symbol♦ | Cat. No. | Legend Marking | Contact Symbol♦ | Cat. No. |
| No Legend START STOP |
|
800S-2SAP | No Legend ON OFF |
|
800S-2SCM |
| No Legend START STOP |
|
800S-2SBM | |||
♦ Contact Symbols
|
Complete Assembled Stations, Continued
|
|
|
| Cat. No. 800S-R3SX | Cat. No. 800S-R2SXP |
| Selector Switches — Type 1 | Selector Switch and Pilot Light — 120V or 240V, Type 1 | ||||||
| Legend Marking | Operator Type | Contact Symbol♦ | Cat. No. | Legend Marking | Operator Type | Contact Symbol♦ | Cat. No. |
| OFF-ON | 2-Position Selector Switch |
|
800S-R2SX | No Legend OFF-ON |
Pilot Light, 2-Position Selector Switch |
|
800S-R2SXP |
| HAND-OFF-AUTO | 3-Position Selector Switch |
|
800S-R3SX | No Legend HAND OFF AUTO |
Pilot Light, 3-Position Selector Switch |
|
800S-R3SXP |
|
|
|
| Cat. No. 800S-2SA | Cat. No. 800S-2SA4 |
| Momentary Contact Buttons | Contact Symbol♦ |
Type 1 | Type 4 Die Cast Aluminum Enclosure ⋆ ‡ |
|
| Legend Marking | Contact Type | Cat. No. | Cat. No. | |
| STOP | 1 N.C. |
|
800S-1SA | 800S-1SA4 |
| 1 N.O. |
|
800S-1SAK | 800S-1SAK4 | |
| START | — |
|
800S-1SB | 800S-1SB4 |
| START STOP |
1 N.O. - 1 N.C. |
|
800S-2SA | 800S-2SA4 |
| 1 N.O. - 1 N.O. |
|
800S-2SAK | 800S-2SAK4 | |
| FOR REV |
— |
|
800S-2SB | 800S-2SB4 |
| OPEN CLOSE |
— |
|
800S-2SF | 800S-2SF4 |
| ON OFF |
1 N.O. - 1 N.C. |
|
800S-2SE | 800S-2SE4 |
| 1 N.O. - 1 N.O. |
|
800S-2SEK | 800S-2SEK4 | |
| RAISE LOWER |
— |
|
800S-2SD | 800S-2SD4 |
| UP DOWN |
— |
|
800S-2SC | 800S-2SC4 |
| FAST SLOW STOP |
— |
|
800S-3SF | — |
| FOR REV STOP |
— |
|
800S-3SA | — |
| OPEN CLOSE STOP |
— |
|
800S-3SD | — |
| RAISE LOWER STOP |
— |
|
800S-3SB | — |
| UP DOWN STOP |
— |
|
800S-3SC | — |
| ⋆ Not rated for DC operation. | ||||
| ‡ Flip levers permit attachment of lock without additional accessory. | ||||
♦ Contact Symbols
|
Contact Ratings
(IEC 337-1) (NEMA ICS 2-125) Maximum Continuous Current Ith 5 A. Bulletin 800S push button stations have control circuit ratings as follows:
| Maximum Operational Voltage Ue |
Utilization Category | Rated Operational Current | |||
| IEC | NEMA | Volts UeUe |
Make | Break | |
|
|
||||
| AC 600 | AC-11 | B600 | 480…600 | 3600VA | 360VA |
| 240…480 | 3600VA | 360VA | |||
| 120…240 | 30 A | 3.0 A | |||
| DC 600 | DC-11 | P600 | 28…600 | 138VA | |
| 24…28§ | 5.0 A | ||||
| § For applications below 24V and 24 mA, Bulletin 800T units with Logic Reed, sealed switch, or stackable sealed switch contact blocks are recommended. | |||||
Accessories
Complete Assembled Stations
| Description | Cat. No. | |
|
Pilot Light Lens Red lens replacement cap. |
800S-N90R |
| Cat. No. 800S-N90R | ||
|
Lamp 120V lamp |
800S-N60 |
| Cat. No. 800S-N60 | ||
|
Locking Attachments This device is used with extended push buttons or 2-position selector switches. |
800S-N1 |
| Cat. No. 800S-N1 | This device is used with 3-position selector switches, to lock in the right or left position. | 800S-N4 |
Approximate Dimensions
Approximate Dimensions and Shipping Weights
Dimensions in inches (millimeters). Dimensions are not intended to be used for manufacturing purposes.
Type 1 — General Purpose Enclosures
|
|
|
| One- and Two-Unit Surface Mounting Stations Shipping Wt. 1 lb (0.45 kg) |
Two-Unit Flush Mounting Station Shipping Wt. 2 lbs (0.91 kg) |
|
|
|
|
| Three-Unit Surface Mounting Station Shipping Wt. 1 lbs (0.45 kg) |
Selector Switch Surface Mounting Station Shipping Wt. 1 lb (0.45 kg) |
|
Type 4 — Watertight Enclosure
|
