Catalogs > Industrial Controls Catalog > Motor Control, NEMA > Manual Motor Starters > Bulletin 600 Single Phase
Bulletin 600 Single Phase
| Introduction |  |
Standards Compliance and Certifications | |
Product Seletion | |
Accessories | |
Modifications | |
Approximate Dimensions | |
| Description | NEMA Enclosure Type |
Cat. No. |
| Pilot Light Replacement Bulb Incandescent¬ (Mfg. Designation #120 PSB-120V) Note: Pilot lights as used on Bulletin 600 switches indicate whether the motor is running only if the switch is used to control the motor directly. If a thermostat, pressure switch, or some other pilot device controls the operation of the motor, the pilot light on the Bulletin 600 switch merely indicates whether the power is ON or OFF. |
4, 7, and 9 | 800S-N60 |
|
||
| Locking Attachment (For Toggle Operated Only) |
1 (Switches in the Type 4 and Type 7 and 9 enclosures are supplied as standard with provisions for locking in the OFF or ON position.) |
600-N1 |
|
||
| Drain (For 3/4 in. (19 mm) Conduit Opening) |
7 and 9 | 800H-NP21 |
|
||
| Flange Seal (Provides NEMA Type 3 rating for outdoor locations in addition to maintaining NEMA Type 7 and 9 integrity) Note: An approved drain Cat. No. 800H-NP21 is required for condensation when this option is used (refer to local Electrical Code). |
3, 7, and 9 | 800H-NP20 |
|
||
| Sealing Well (See applicable codes and laws) (Not available for use with Cat. No. 600-TEX5) Note: When using a sealing well with integral flange seal for NEMA Type 3 outdoor applications, an approved drain fitting must be provided (refer to local Electrical Code). |
3, 7, and 9 (With integral flange seal) |
2 wire: 800H-NPRD90 4 wire: 800H-NPRD91 |
|
7 and 9 (Without integral flange seal) |
2 wire: 800H-NPD90 4 wire: 800H-NPD91 |
| ¬ All other devices with the pilot light option utilize a neon lamp. For replacement information consult your local Rockwell Automation sales office or Allen-Bradley distributor. (For Type 1 enclosure use replacement bulb 40268-313-51) | ||