Catalogs > Industrial Controls Catalog > Motor Control, NEMA > Manual Motor Starters > Bulletin 600 Single Phase
Bulletin 600 Single Phase
| Introduction |  |
Standards Compliance and Certifications | |
Product Seletion | |
Accessories | |
Modifications | |
Approximate Dimensions | |
Dimensions are shown in inches (millimeters). Dimensions are not intended to be used for manufacturing purposes.
Open Type without Enclosure
|
| Cat. Nos. | ||
| 600- TOX4 TOX5 TOX49 |
600- TOX109 TOX110 TOX149 |
600- TOX216 |
Type 1 General Purpose Enclosure Surface Mounting
|
| Cat. Nos. | ||
| 600- TAX4 TAX5 TAX49 |
600- TAX109 TAX110 TAX149 |
600- TAX216 |
| Cat. Nos. | ||
| 600- TAX9 TAX10 |
600- TAX142 TAX144 |
600- TAX145 |
| Dimension A in inches (Millimeters) | |
| Key Inserted | 1-1/8 (79.5) |
| Selector Switch | 2-3/4 (70) |
| Toggle Operator | 2-9/16 (65) |
Type 4 Watertight Enclosure;
Type 7 and 9 Hazardous Locations Enclosure
|
| Cat. Nos. | |
| 600- TCX5 | 600- TEX5 |
Type 1 General Purpose Enclosure Flush Mounting
|
|
| Cat. Nos. | |
| 600- TQX4 TQX5 TQX49 |
600- TQX109 TQX110 TQX216 |
| Cat. Nos. | |
| 600- TQX9 TQX142 |
600- TQX144 |
|
Type 4 Watertight Enclosure, Type 7 & 9
|
| Cat. Nos. | |
| 600- TCX9 TCX142 |
600- TEX9 TEX10 |
Type 7 & 9 Hazardous Locations Enclosure
|
| Cat. Nos. | |
| 600- TCA7 TCD75 |
600- TEA7 TED7 |
¬ Lever Type Dimension is 2-17/32 in. (64.5 mm).
T This dimension may vary up to ±1/8 in. (3.2 mm). Mounting holes should be located at time of installation using device as a template.