Catalogs > Industrial Controls Catalog > Motor Control, NEMA > Manual Motor Starters > Bulletin 609 Single and Three Phase
Bulletin 609 Single and Three Phase
| Introduction |  |
Standards Compliance and Certifications | |
Product Selection | |
Accessories | |
Approximate Dimensions | |
Pilot Light Kits
Kits are available for field installation of pilot lights in Type 1 General Purpose surface or flush mounting enclosures. As standard, a clear pilot light lens is supplied. Pilot lights are not available for Bulletin 609RS or 609TS manual starters.
| Volts [V] | Cat. No. |
| 120 | 609-N10 |
| 240 | 609-N20 |
| 480 | 609-N40 |
| 600 | 609-N60 |
Pilot Lights Factory Installed
To order, add the following suffix code after the last letter in the listed Cat. No. Example: Cat. No. 609-AAXD4. Available for Type 1 General Purpose Enclosure only.
| Volts [V] | Suffix Code |
| 120 | D4 |
| 240 | A4 |
| 480 | B4 |
| 600 | C4 |
| Note:Replacement lamp is ANSI part number B2A (NE-51H), Cat. No. 609-N9. | |
Fusing
The Bulletin 609 is suitable for general installation in accordance with the local electrical code.
Group Fusing
The Bulletin 609 sizes 0 and 1 in Type 1, 4X, and 12 enclosures are UL Listed for group fusing with Class J fuses only. See table below for maximum fuse ratings.
| Full Load Current of Smallest Motor Amperes [A] |
Maximum Fuse Ratings [A] | |
| Nominal System Voltages | ||
| 120…240V | 480…600V | |
| 0.45…2.99 | 30 | 30 |
| 3.00…6.49 | 60 | 30 |
| 6.50…18.0 | 100 | — |