Catalogs > Industrial Controls Catalog > Motor Control, NEMA > Manual Motor Starters > Bulletin 609U with Under Voltage Protection
Bulletin 609U with Under Voltage Protection
| Introduction | Standards Compliance and Certifications | Product Selection | Modifications | Approximate Dimensions |
Pilot Light Kits
Kits are available for field installation of pilot lights in Type 1 general purpose surface or flush mounting enclosures. A clear lens is provided as standard. Pilot lights are not available for Bulletin 609RS or 609TS manual starters.
| Volts [V] | NEMA Type | Cat. No. |
| 120 | Type 1 | 609-N10 |
| 240 | 609-N20 | |
| 480 | 609-N40 | |
| 600 | 609-N60 | |
Pilot Lights Factory Installed
To order, add the number 4 after the last letter in the listed cat. no. Example: Cat. No. 609U-AAXD becomes Cat. No. 609U-AAXD4. Available for Type 1 general purpose enclosure only.
Note:Replacement lamp is ANSI part number B2A (NE-51H), Allen-Bradley Cat. No. 609-N9.
Group Fusing
The Bulletin 609U and 609TU Sizes 0 and 1 in Type 1, 4/4X, and 3R/12 enclosures are UL Listed for group fusing with Class J fuses only. See table below for maximum fuse ratings.
| Full Load Current of Smallest Motor Amperes [A] |
Maximum Fuse Ratings [A] | |
| Nominal System Voltages | ||
| 120…240V | 480…600V | |
| 0.45…2.99 | 30 | 30 |
| 3.00…6.49 | 60 | 30 |
| 6.50…18.0 | 100 | — |
Typical Wiring Diagram
(See Applicable Codes and Laws)
|
★ Remove Jumper A to connect remote stop operator wires to vacated terminals.
Note:Jumper not available on devices in Type 7 and 9 Enclosure.
