Catalogs > Industrial Controls Catalog > Motor Control, NEMA > Vacuum Contactors and Starters > Bulletin 1102C Vacuum Contactors

Bulletin 1102C Vacuum Contactors

Introduction

Standards Compliance and Certifications

Configuration of a Basic Vacuum Contactor

Approximate Dimensions

Product Selection

Build a Catalog Number

Your order must include: 1) Cat. no. of vacuum contactor, 2) if required, cat. no. of any accessories.

3-Phase, 1500V Maximum, 60 Hz

Capacitor Switching⋆ [kVAR]					Transformer Primary Switching‡ [kVA]					Continuous Current Rating [A]	Cat. No.§
240V	440V	575V	1000V	1500V	240V	440V	575V	1000V	1500V	Continuous Current Rating [A]	Cat. No.§
62	114	156	260	390	55	152	207	346	519	200	1102C-BOÄ93
124	228	312	520	780	110	304	414	692	1038	400	1102C-COÄ93
200	366	500	830	1250	249	450	620	1384	2076	600	1102C-DOÄ93

Motor Switching Ratings
200V / 208V		220V / 240V		380V / 415V		440V / 480V		550V / 600V		1000V		1500V		Cat. No.§
[Hp]	[kW]	[Hp]	[kW]	[Hp]	[kW]	[Hp]	[kW]	[Hp]	[kW]	[Hp]	[kW]	[Hp]	[kW]	Cat. No.§
60	45	75	56	100	75	150	112	200	150	300	224	500	373	1102C-BOÄ93
125	93	150	112	200	150	300	224	400	298	700	522	1000	746	1102C-COÄ93
200	149	200	149	350	261	400	298	600	447	1000	746	1200	895	1102C-DOÄ93

Ä Control Voltage Code

The cat. no. is incomplete. To complete the cat. no., select a control voltage code from the table below and insert into the cat. no.
Example: Cat. No. 1102C-BOÄ93 becomes Cat. No. 1102C-BOD93.

		[V]	120	125	240	250	380…415	440…480
AC	50/60 Hz		D	—	A	—	N	B
DC	—		—	G	—	H	—	—

⋆ Inrush current should be less than 1000% of IEC AC3 operational current.
‡ For use on transformers having an inrush not more than 20 times the rated full load current irrespective of secondary load. Ratings do not apply to transformers used in resistive welder service.
§ Terminal lugs not included — see Accessories on Lug Kit (3 per kit).