Combination Contactors, Starters, and Pump Control Panels

Catalogs > Industrial Controls Catalog > Motor Control, NEMA > Combination Contactors, Starters, and Pump Control Panels > Bulletin 513M Non-Reversing Starters

Bulletin 513M Non-Reversing Starters

Product Selection

Build a Catalog Number

Heater Elements — Starters with eutectic alloy overload relay require 3 overload heater elements. Located on Eutectic Alloy Overload Relay Heater Elements.
NEMA Size	Continuous Ampere Rating [A]	Maximum Horsepower Rating Full Load Current Must Not Exceed Continuous Ampere Rating				Type 3R/4/12 Rainproof, Waterproof, Dusttight	Type 3R/4/12 Rainproof, Waterproof, Dusttight (Door Safety Hardware)	Type 4/4X Watertight, Corrosion-Resistant, Stainless Steel
		Motor Voltage
		200V	230V	460V	575V	Cat. No.⋆ ‡	Cat. No.⋆ ‡	Cat. No.⋆ ‡
1	27	0…1/3	0…1/3	—	—	513M-BFÄ-µ-32	513M-BJÄ-µ-32	513M-BCÄ-µ-32
		1/2…1	1/2…1	0…1	0…1	513M-BFÄ-µ-35	513M-BJÄ-µ-35	513M-BCÄ-µ-35
		1-1/2…3	1-1/2…3	1-1/2…3	1-1/2…3	513M-BFÄ-µ-38	513M-BJÄ-µ-38	513M-BCÄ-µ-38
		5	—	—	—	513M-BFÄ-µ-39	513M-BJÄ-µ-39	513M-BCÄ-µ-39
		7-1/2	5…7-1/2	5…7-1/2	5…7-1/2	513M-BFÄ-µ-40	513M-BJÄ-µ-40	513M-BCÄ-µ-40
		—	—	10	10	513M-BFÄ-µ-41	513M-BJÄ-µ-41	513M-BCÄ-µ-41
2	45	10	10	—	—	513M-CFÄ-µ-41	513M-CJÄ-µ-41	513M-CCÄ-µ-41
		—	15	15	15	513M-CFÄ-µ-42	513M-CJÄ-µ-42	513M-CCÄ-µ-42
		—	—	20…25	20…25	513M-CFÄ-µ-44	513M-CJÄ-µ-44	513M-CCÄ-µ-44

⋆ To order starters (size 0…4) with current limiters, add the letter C at the end of the listed cat. no. Example: Cat. No. 513M-AAÄ-µ-35C.
‡ To order Visa-Window Breakers for certain mining applications (Canada only), add the letter V to the cat. no. Example: Cat. No. 513M-BAÄ-µ-35V.

Ä Coil Voltage Code

The cat. no. as listed is incomplete. Select a Coil Voltage Code from the table below to complete the cat. no.
Example: Cat. No. 513M-BFÄ-µ-35 becomes Cat. No. 513M-BFB-µ-35. For other voltages, consult your local Rockwell Automation sales office or Allen‑Bradley distributor.

		[V]	208	230…240	460…480	575…600
Common Control	AC, 60 Hz		H	A	B	C
Transformer Control (See Configuration of a Basic Combination Starter Note)
120V Separate Control (without transformer)			AD	AD	CD	CD

µ Overload Relay Code

Use to order solid-state overload relay. Do not use when ordering eutectic alloy overload relay. The cat. no. as listed is incomplete. Select an overload relay code from E1 Plus Solid-State Three-Phase Overload Relay (Selectable Class 10, 20, or 30) (Automatic/Manual Reset) to complete the cat. no.
Example: Cat. No. 513M-BAB-µ-35 becomes Cat. No. 513M-BAB-A2E-35.