Combination Contactors, Starters, and Pump Control Panels

Catalogs > Industrial Controls Catalog > Motor Control, NEMA > Combination Contactors, Starters, and Pump Control Panels > Bulletin 512M Non-Reversing Disconnect Type with Extra Panel Space

Bulletin 512M Non-Reversing Disconnect Type with Extra Panel Space

Introduction Standards Compliance and Certifications Configuration of a Basic Combination Starter Product Selection Modifications for Combination Devices
Accessories Specifications Full Load Motor Currents Approximate Dimensions Renewal Parts
Product Selection

Build a Catalog Number


Heater Elements — Starters with eutectic alloy overload relay require 3 heater elements. Located on Eutectic Alloy Overload Relay Heater Elements.
NEMA Size Continuous Ampere Rating [A] Maximum Horsepower Rating
Full Load Current Must Not Exceed
Continuous Ampere Rating
Line
Voltage [V]
Fuse Clip Rating
Amperes [A]
Fuses not included. Select per NEC
Type 3R/4/12
Rainproof, Waterproof, Dusttight
Type 3R/4/12
Rainproof, Waterproof, Dusttight (Door Safety Hardware)
Type 4/4X
Watertight, Corrosion-Resistant, Stainless Steel
Motor Voltage
60 Hz 60 Hz 50 Hz 60 Hz Cat. No.⋆ ‡  Cat. No.⋆ ‡  Cat. No.⋆ ‡ 
200V 230V 380…
415V
460…
575V
1 27 7-1/2 7-1/2 208…240 30 512M-BFÄ-µ-24R 512M-BJÄ-µ-24R 512M-BCÄ-µ-24R
60 512M-BFÄ-µ-25R 512M-BJÄ-µ-25R 512M-BCÄ-µ-25R
10 10 480…600 30 512M-BFÄ-µ-24R 512M-BJÄ-µ-24R 512M-BCÄ-µ-24R
60 512M-BFÄ-µ-25R 512M-BJÄ-µ-25R 512M-BCÄ-µ-24R
2 45 10 15 208…240 60 512M-CFÄ-µ-25R 512M-CJÄ-µ-25R 512M-CCÄ-µ-25R
100 512M-CFÄ-µ-26J 512M-CJÄ-µ-26J 512M-CCÄ-µ-26J
25 25 480…600 30 512M-CFÄ-µ-24R 512M-CJÄ-µ-24R 512M-CCÄ-µ-24R
60 512M-CFÄ-µ-25R 512M-CJÄ-µ-25R 512M-CCÄ-µ-25R
100 512M-CFÄ-µ-26J 512M-CJÄ-µ-26J 512M-CCÄ-µ-26J
  

⋆ Non-Fusible Disconnect Type

Cat. nos. listed above include a fusible disconnect switch with Class R or J fuse clips. To order a non-fusible disconnect switch, eliminate the fuse clip code from the cat. no. Example: Cat. No. 512M-BFB-24R becomes Cat. No. 512M-BFB.


‡ Class H fuse clips can be supplied. Example: Cat. No. 512M-BAµ-24R becomes Cat. No. 512M-BAµ-24.
Class J fuse clips can be supplied. Example: Cat. No. 512M-BAµ-24R becomes Cat. No. 512M-BAµ-24J.
Class HRC form II fuse clips can be supplied. Example: Cat. No. 512M-BAµ-24R becomes Cat. No. 512M-BAµ-24E.


Ä Coil Voltage Code

The cat. no. as listed is incomplete. Select a Coil Voltage Code from the table below to complete the cat. no.
Example: Cat. No. 512M-BFÄ-µ-24R becomes Cat. No. 512M-BFB-µ-24R. For other values, consult your local Rockwell Automation sales office or Allen‑Bradley distributor.


  [V] 208 230…240 460…480 575…600
Common Control AC, 60 Hz H A B C
Transformer Control (See Configuration of a Basic Combination Starter Note)
120V Separate Control (without transformer) AD AD CD CD
  

µ Overload Relay Code

Use to order solid-state overload relay. Do not use when ordering eutectic alloy overload relay. The cat. no. as listed is incomplete. Select an overload relay code from E1 Plus Solid-State Three-Phase Overload Relay (Selectable Class 10, 20, or 30) (Automatic/Manual Reset) to complete the cat. no.
Example: Cat. No. 512M-BJB-µ-24R becomes Cat. No. 512M-BJB-A2E-24R.