Combination Contactors, Starters, and Pump Control Panels

Catalogs > Industrial Controls Catalog > Motor Control, NEMA > Combination Contactors, Starters, and Pump Control Panels > Bulletin 512V Non-Reversing Vacuum Disconnect Type

Bulletin 512V Non-Reversing Vacuum Disconnect Type

Product Selection

Build a Catalog Number

Heater Elements — Starters with eutectic alloy overload relay require 3 heater elements. Located on Eutectic Alloy Overload Relay Heater Elements.
NEMA Size	Continuous Ampere Rating [A]	Max. Hp Rating Full Load Current Must Not Exceed Continuous Ampere Rating				Line Voltage [V]	Fuse Clip Rating Amperes [A] Fuses not included. Select per NEC	Type 1 General Purpose	Type 3R/4/12 Rainproof, Waterproof, Dusttight	Type 3R/4/12 Rainproof, Waterproof, Dusttight (Door Safety Hardware)	Type 4/4X Watertight Corrosion- Resistant Stainless Steel
		Motor Voltage
		60 Hz	60 Hz	50 Hz	60 Hz
		200V	230V	380 … 415V	460 … 575V			Cat. No.¬ T	Cat. No.¬ T	Cat. No.¬ T	Cat. No.¬ T
4	135	—	—	75	100	480…600	100	512V-EAÄ-µ-26R	512V-EFÄ-µ-26R	512V-EJÄ-µ-26R	512V-ECÄ-µ-26R
		40	50	—	—	208…240	200	512V-EAÄ-µ-27R	512V-EFÄ-µ-27R	512V-EJÄ-µ-27R	512V-ECÄ-µ-27R
		—	—	75	100	480…600	200	512V-EAÄ-µ-27R	512V-EFÄ-µ-27R	512V-EJÄ-µ-27R	512V-ECÄ-µ-27R
		40	50	—	—	208…240	400	512V-EAÄ-µ-28J	512V-EFÄ-µ-28J	512V-EJÄ-µ-28J	512V-ECÄ-µ-28J
		—	—	75	100	480…600	400	512V-EAÄ-µ-28J	512V-EFÄ-µ-28J	512V-EJÄ-µ-28J	512V-ECÄ-µ-28J
5	270	40	50	—	—	208…240	200	512V-FAÄ-µ-27R	512V-FFÄ-µ-27R	512V-FJÄ-µ-27R	512V-FCÄ-µ-27R
		—	—	75	100	480…600	200	512V-FAÄ-µ-27R	512V-FFÄ-µ-27R	512V-FJÄ-µ-27R	512V-FCÄ-µ-27R
		75	100	150	200	208…600	400	512V-FAÄ-µ-28R	512V-FFÄ-µ-28R	512V-FJÄ-µ-28R	512V-FCÄ-µ-28R
6	540	150	200	300	400	208…600	600	—	512V-GFÄ-µ-29R	—	—

Ä Coil Voltage Code

The cat. no. as listed is incomplete. Select a Coil Voltage Code from the table below to complete the cat. no.
Example: Cat. No. 512V-EAÄ-µ-26R becomes Cat. No. 512V-EAB-µ-26R. For other voltages, consult your local Rockwell Automation sales office or Allen‑Bradley distributor.

		[V]	208	230…240	460…480	575…600
Common Control	AC, 60 Hz		—	A	B	—
Transformer Control (See Configuration of a Basic Combination Starter Note)			H	A	B	C
120V Separate Control (without transformer)			AD	AD	CD	CD

µ Overload Relay Code

Use to order solid-state overload relay. Do not use when ordering eutectic alloy overload relay. The cat. no. as listed is incomplete. Select an overload relay code from E1 Plus Solid-State Overload Relay
(Selectable Class 10, 20, or 30) (Automatic/Manual Reset) to complete the cat. no.
Example: Cat. No. 512V-EAB-µ-26R becomes Cat. No. 512V-EAB-B1M-26R.

¬ Non-Fusible Disconnect Type

Cat. nos. listed above include a fusible disconnect switch with Class R or J fuse clips. To order a non-fusible disconnect switch, eliminate the fuse clip code from the cat. no. Example: Cat. No. 512V-EFB-26R becomes Cat. No. 512V-EFB.

T Class H fuse clips can be supplied. Example: Cat. No. 512V-EAÄ-26R becomes Cat. No. 512V-EAÄ-26.
Class J fuse clips can be supplied. Example: Cat. No. 512V-EAÄ-26R becomes Cat. No. 512V-EAÄ-26J.
Class HRC form II fuse clips can be supplied. Example: Cat. No. 512V-EAÄ-26R becomes Cat. No. 512V-EAÄ-26E.