Combination Contactors, Starters, and Pump Control Panels

Catalogs > Industrial Controls Catalog > Motor Control, NEMA > Combination Contactors, Starters, and Pump Control Panels > Bulletin 1232V Vacuum Pump Control Panels

Bulletin 1232V Vacuum Pump Control Panels

Introduction Standards Compliance and Certifications Configuration of a Basic Combination Starter Product Selection Modifications for Combination Devices
Accessories Specifications Full Load Motor Currents Approximate Dimensions Renewal Parts
Product Selection

Build a Catalog Number


Heater Elements — Starters with eutectic alloy overload relays require 3 heater elements. Located on Eutectic Alloy Overload Relay Heater Elements.
NEMA Size Continuous Ampere Rating [A] Max. Hp Rating
Full Load Current Must Not Exceed Continuous Ampere Rating 		Line Voltage [V] Fuse Clip Rating Amperes [A]
Fuses not included.
Select per NEC 		Type 3R
Rainproof with Extra
Panel Space⋆ 
Motor Voltage
60 Hz 60 Hz 50 Hz 60 Hz
200V 230V 380…415V 460…575V Cat. No.
4 135 40 50 — — 208…240 200 1232V-ENÄ-µ-27R
— — 75 100 480…600 200 1232V-ENÄ-µ-27R
40 50 — — 208…240 400 1232V-ENÄ-µ-28J
— — 75 100 480…600 400 1232V-ENÄ-µ-28J
5 270 75 100 — — 208…240 400 1232V-FNÄ-µ-28R
— — 150 200 480…600 400 1232V-FNÄ-µ-28R
6 540 150 200 300 400 208…600 600⋆  1232V-GNÄ-µ-29R
  

Ä Coil Voltage Code

The cat. no. as listed is incomplete. Select a Coil Voltage Code from the table below to complete the cat. no.
Example: Cat. No. 1232V-ENÄ-µ-27R becomes Cat. No. 1232V-ENA-µ-27R. For other voltages, consult your local Rockwell Automation sales office or Allen‑Bradley distributor.

  [V] 208 230…240 460…480 575…600
Common Control AC, 60 Hz — A B —
Transformer Control (See Configuration of a Basic Combination Starter Note) H A B C
120V Separate Control (without transformer) AD AD CD CD
  

µ Overload Relay Code

Use to order solid-state overload relay. Do not use when ordering eutectic alloy overload relay. The cat. no. as listed is incomplete. Select an overload relay code from E1 Plus Solid-State Three-Phase Overload Relay (Selectable Class 10, 20, or 30) (Automatic/Manual Reset) to complete the cat. no.
Example: Cat. No. 1232V-ENA-µ-27R becomes Cat. No. 1232V-ENA-A2M-27R.

⋆ For 230V and 460V Hp ratings, limit the maximum fuse sizing to 125% of motor full load current.