Catalogs > Industrial Controls Catalog > Motor Control, NEMA > Combination Contactors, Starters, and Pump Control Panels > Bulletin 1233V Vacuum Pump Control Panels
Bulletin 1233V Vacuum Pump Control Panels
| Introduction |  |
Standards Compliance and Certifications | |
Configuration of a Basic Combination Starter | |
Product Selection | |
Modifications for Combination Devices | |
| Accessories | |
Specifications | |
Full Load Motor Currents | |
Approximate Dimensions | |
Renewal Parts | |
| Build a Catalog Number |
| Heater Elements — Starters with eutectic alloy overload relays require 3 heater elements. Located on Eutectic Alloy Overload Relay Heater Elements. | ||||||
| NEMA Size | Continuous Ampere Rating [A] | Maximum Horsepower Rating Full Load Current Must Not Exceed Continuous Ampere Rating |
Type 3R Rainproof with Extra Panel Space |
|||
| Motor Voltage | ||||||
| 200V | 230V | 460V | 575V | Cat. No. | ||
| 4 | 135 | 30 | — | — | — | 1233V-ENÄ-µ-45T |
| 40 | 40 | — | — | 1233V-ENÄ-µ-46T | ||
| — | 50 | — | — | 1233V-ENÄ-µ-47T | ||
| — | — | — | 60 | 1233V-ENÄ-µ-48T | ||
| — | — | 60…75 | — | 1233V-ENÄ-µ-49T | ||
| — | — | 100 | 75…100 | 1233V-ENÄ-µ-50T | ||
| 5 | 270 | 50…60 | — | — | — | 1233V-FNÄ-µ-48T |
| 75 | 60…75 | — | — | 1233V-FNÄ-µ-49T | ||
| — | 100 | — | — | 1233V-FNÄ-µ-50T | ||
| — | — | — | 125 | 1233V-FNÄ-µ-51T | ||
| — | — | 125…150 | — | 1233V-FNÄ-µ-52T | ||
| — | — | 200 | 150…200 | 1233V-FNÄ-µ-54T | ||
| 6 | 540 | 100 | — | — | — | 1233V-GNÄ-µ-50T |
| 125 | 125 | — | — | 1233V-GNÄ-µ-51T | ||
| 150 | 150 | — | — | 1233V-GNÄ-µ-52T | ||
| — | 200 | — | — | 1233V-GNÄ-µ-54T | ||
| — | — | 250 | 250 | 1233V-GNÄ-µ-56T | ||
| — | — | 300 | 300 | 1233V-GNÄ-µ-57T | ||
| — | — | — | 350 | 1233V-GNÄ-µ-58T | ||
| — | — | 350…400 | 400 | 1233V-GNÄ-µ-59T | ||
Ä Coil Voltage Code
The cat. no. as listed is incomplete. Select a coil voltage code from the table below to complete the cat. no.
Example: Cat. No. 1233V-ENÄ-µ-45T becomes Cat. No. 1233V-ENA-µ-45T. For other voltages, consult your local Rockwell Automation sales office or Allen‑Bradley distributor.
| [V] | 208 | 230…240 | 460…480 | 575…600 | ||
| Common Control | AC, 60 Hz | — | A | B | — | |
| Transformer Control (See Configuration of a Basic Combination Starter Note) | H | A | B | C | ||
| 120V Separate Control (without transformer) | AD | AD | CD | CD | ||
µ Overload Relay Code
Use to order solid-state overload relay. Do not use when ordering eutectic alloy overload relay. The cat. no. as listed is incomplete. Select an overload relay code from E1 Plus Solid-State Three-Phase Overload Relay (Selectable Class 10, 20, or 30) (Automatic/Manual Reset) to complete the cat. no.
Example: Cat. No. 1233V-ENA-µ-45T becomes Cat. No. 1233V-ENA-A2M-45T.