Catalogs > Industrial Controls Catalog > Motor Control, NEMA > Combination Contactors, Starters, and Pump Control Panels > Bulletin 512H Horizontal Mounting Disconnect Type
Bulletin 512H Horizontal Mounting Disconnect Type
| Introduction |  |
Standards Compliance and Certifications | |
Configuration of a Basic Combination Starter | |
Product Selection | |
Modifications for Combination Devices | |
| Accessories | |
Specifications | |
Full Load Motor Currents | |
Approximate Dimensions | |
Renewal Parts | |
| Build a Catalog Number |
| Heater Elements — Starters with eutectic alloy overload relay require 3 heater elements. Located on Eutectic Alloy Overload Relay Heater Elements. | |||||||||
| NEMA Size | Continuous Ampere Rating [A] | Max. Hp Rating Full Load Current Must Not Exceed Continuous Ampere Rating |
Coil Voltage [V]¬ | Fuse Clip Rating Amperes [A] Fuses not included. Select per NEC |
Type 3R/4/12 Rainproof, Waterproof, Dusttight with Door Safety Hardware | Type 3R/4/12 Rainproof, Waterproof, Dusttight with Door Safety Hardware & External Overload Relay Reset | |||
| Motor Voltage, 60 Hz | |||||||||
| 200V | 230V | 460V | 575V | ||||||
| Fusible Disconnect Type with Class H, J, and K Fuse Clips‡ | Cat. No.§ | Cat. No.§ | |||||||
| 1 | 27 | 7.5 | — | — | — | 208 | 30 | 512H-BJH-24 | 512H-BDH-24 |
| 60 | 512H-BJH-25 | 512H-BDH-25 | |||||||
| — | 7.5 | — | — | 240 | 30 | 512H-BJA-24 | 512H-BDA-24 | ||
| 60 | 512H-BJA-25 | 512H-BDA-25 | |||||||
| — | — | 10 | — | 480 | 30 | 512H-BJB-24 | 512H-BDB-24 | ||
| 60 | 512H-BJB-25 | 512H-BDB-25 | |||||||
| — | — | — | 10 | 600 | 30 | 512H-BJC-24 | 512H-BDC-24 | ||
| 60 | 512H-BJC-25 | 512H-BDC-25 | |||||||
| 2 | 45 | 10 | — | — | — | 208 | 60 | 512H-CJH-25 | 512H-CDH-25 |
| 100 | 512H-CJH-26 | 512H-CDH-26 | |||||||
| — | 15 | — | — | 240 | 60 | 512H-CJA-25 | 512H-CDA-25 | ||
| 100 | 512H-CJA-26 | 512H-CDA-26 | |||||||
| — | — | 25 | — | 480 | 60 | 512H-CJB-25 | 512H-CDB-25 | ||
| 100 | 512H-CJB-26 | — | |||||||
| — | — | — | 25 | 600 | 60 | 512H-CJC-25 | 512H-CDC-25 | ||
| 100 | 512H-CJC-26 | — | |||||||
| Note:Class R fuse clips can be supplied as a factory option in place of standard clips by adding and R after the digit which indicated the fuse clip size. | |||||||||
| ¬ 120V Separate Control (Control Circuit Transformer not supplied) — To order a 208V or 240V starter with 120V separate control, change the third letter following the first dash in the listed catalog number to AD. The AD represents 240V and corresponds to the fuse clip spacing. To order a 480V or 600V starter, change the third letter following the first dash in the listed catalog number to CD. The CD represents 600V and corresponds to the fuse clip spacing. List prices apply. When ordering a separate control circuit transformer select the primary voltage on the basis of the actual system line voltage. 120V Separate Control (Control Circuit Transformer not supplied) — To order a non-fusible type starter with 120V coil for separate control, change the third letter following the first dash in the listed catalog number to D. List prices apply. |
|||||||||
| ‡ Class H and K fuse clips will also accept Class R fuses. Class R fuse clips are the rejection type and will accept Class R fuses only. | |||||||||
§ Non-Fusible Disconnect Type
Cat. nos. listed above include a fusible disconnect switch with Class R or J fuse clips. To order a non-fusible disconnect switch, eliminate the fuse clip code from the cat. no. Example: Cat. No. 512-BFB-24R becomes Cat. No. 512-BFB.