Combination Contactors, Starters, and Pump Control Panels

Catalogs > Industrial Controls Catalog > Motor Control, NEMA > Combination Contactors, Starters, and Pump Control Panels > Bulletin 1232 Pump Control Panels

Bulletin 1232 Pump Control Panels

Product Selection

Build a Catalog Number

Heater Elements — Starters with eutectic alloy overload relays require 3 heater elements. Located on Eutectic Alloy Overload Relay Heater Elements.
NEMA Size	Continuous Ampere Rating [A]	Maximum Horsepower Rating Full Load Current Must Not Exceed Continuous Ampere Rating				Line Voltage [V]	Fuse Clip Rating Amperes [A] Fuses not included. Select per NEC ‡	Type 3R Rainproof with Narrow Enclosure
		AC Motor Voltage
		60 Hz	60 Hz	50 Hz	60 Hz
		200V	230V	380…415V	460…575V			Cat. No.⋆
1	27	7-1/2	7-1/2	—	—	208…240	30	1232-BNÄ-µ-24
		—	—	10	10	480…600	30	1232-BNÄ-µ-24
		7-1/2	7-1/2	—	—	208…240	60	1232-BNÄ-µ-25
		—	—	10	10	480…600	60	1232-BNÄ-µ-25
2	45	10	15	—	—	208…240	60	1232-CNÄ-µ-25
		—	—	25	25	480…600	60	1232-CNÄ-µ-25
		10	15	—	—	208…240	100	1232-CNÄ-µ-26
		—	—	25	25	480…600	100	1232-CNÄ-µ-26
3	90	25	30	—	—	208…240	100	1232-DNÄ-µ-26
		—	—	50	50	480…600	100	1232-DNÄ-µ-26
		25	30	—	—	208…240	200	1232-DNÄ-µ-27
		—	—	50	50	480…600	200	1232-DNÄ-µ-27
⋆ Class R fuse clips can be supplied as a factory option in place of Class H clips. To order Class R fuse clips, add an “R” after the cat. no. Example: Cat. No. 1232-BN⊗-✪-24 becomes Cat. No. 1232-BN⊗-✪-24R. Class H fuse clips will accept Class R fuses. However, only Class R fuse clips are the rejection type which limit their use to Class R fuses. To order Class J fuse clips, add a “J” after the cat. no. Example: Cat. No. 1232-BN⊗-✪-24 becomes Cat. No. 1232-BN⊗-✪-24J.
‡ Some applications may require time-delay fuses when this size fuse clip is used.

Ä Coil Voltage Code

The cat. no. as listed is incomplete. Select a coil voltage code from the table below to complete the cat. no.
Example: Cat. No. 1232-BNÄ-µ-24 becomes Cat. No. 1232-BNA-µ-24. For other voltages, consult your local Rockwell Automation sales office or Allen‑Bradley distributor.

Voltage§		[V]	208	230…240	460…480	575…600
Common Control	AC, 60 Hz		H	A	B	C
Transformer Control♣
120V Separate Control (without transformer)			AD	AD	CD	CD

µ Overload Relay Code

Use to order solid-state overload relay. Do not use when ordering eutectic alloy overload relay. The cat. no. as listed is incomplete. Select an overload relay code from E1 Plus Solid-State Three-Phase Overload Relay (Selectable Class 10, 20, or 30) (Automatic/Manual Reset) to complete the cat. no.
Example: Cat. No. 1232-BNA-µ-24 becomes Cat. No. 1232-BNA-A2E-24.