Bulletin 800H 30.5 mm Push Button Enclosure
|
Bulletin 800H — 30.5 mm Push Button Enclosure
- Pre-molded 30.5 mm mounting hole
- Available in two colors:
- Grey enclosures: Type 4, 4X, 12, and 13 watertight, corrosion resistant, and dusttight, IP66 protection
- Yellow enclosures: Type 4, 4X, 12, and 13 watertight, corrosion resistant, and dusttight, IP66 protection
- Grey enclosures: Type 4, 4X, 12, and 13 watertight, corrosion resistant, and dusttight, IP66 protection
- Available in these configurations:
- 1-hole
- 2-hole
- 3-hole
- 4-hole
- 1-hole
- Designed for both indoor and outdoor applications.
Standards Compliance and Certifications
Standards Compliance
UL 508A
CSA C22.2, No. 14
Certifications
cULus Listed (File No. E54866; Guide No. NITW, NITW7)
CE Marked
Technical Specifications
| Product Certification | |
| Approvals/Certifications | cULus, CE |
| Degree of Protection | Type 4, 4X, 12, and 13, IP66 |
| Environmental | |
| Storage Temperature Range | -40…+75 °C (-40…+158 °F) |
| Operating Temperature Range | -40…+55 °C (-40…+131 °F) |
| Material | |
| Enclosure | Thermoplastic polyester blend, UL 94, 5VA |
| Gasket | Foam-in-place polyurethane |
Product Selection
Legend Plate Compatibility/Options
| Build a Catalog Number |
|
Contact Block Compatibility/Options
|
Product Selection
|
|
|
| Cat. No. 800H-1HZ4__ | Cat. No. 800H-2HZ4__ |
| Enclosure | Cat. No. | Pkg. Quantity | Cat. No. | Pkg. Quantity |
| Grey Enclosure | 800H-1HZ4C | 1 | 800H-2HZ4C | 1 |
| Yellow Enclosure | 800H-1HZ4CY | 800H-2HZ4CY | ||
| Outside Dimensions★ (H x W x D) |
110 mm x 80 mm x 70 mm (4.33 in. x 3.15 in. x 2.76 in.) |
130 mm x 80 mm x 85 mm (5.12 in. x 3.15 in. x 3.35 in.) |
||
| Base Depth | 50 mm (1.97 in.) | 50 mm (1.97 in.) | ||
| Cover Depth | 20 mm (0.79 in.) | 35 mm (1.38 in.) | ||
| Cover Screw Material | Glass-reinforced nylon | Glass-reinforced nylon | ||
| Recommended Tightening Torque | 1.0…1.2 N•m (9…11 lb•in) | 1.0…1.2 N•m (9…11 lb•in) | ||
| Approx. Ship Weight | 213 g (0.47 lb) | 271 g (0.60 lb) | ||
| ★ Dimensions are not intended to be used for manufacturing purposes. | ||||
|
|
|
| Cat. No. 800H-4HZ4__ | Cat. No. 800H-4HZ4__ |
| Enclosure | Cat. No. | Pkg. Quantity | Cat. No. | Pkg. Quantity |
| Gray Enclosure | 800H-3HZ4C | 1 | 800H-4HZ4C | 1 |
| Yellow Enclosure | 800H-3HZ4CY | 800H-4HZ4CY | ||
| Outside Dimensions★ (H x W x D) |
180 mm x 80 mm x 85 mm (7.09 in. x 3.15 in. x 3.35 in.) |
250 mm x 80 mm x 85 mm (9.84 in. x 3.15 in. x 3.35 in.) |
||
| Base Depth | 50 mm (1.97 in.) | 50 mm (1.97 in.) | ||
| Cover Depth | 35 mm (1.38 in.) | 35 mm (1.38 in.) | ||
| Cover Screw Material | Glass-reinforced nylon | Glass-reinforced nylon | ||
| Recommended Tightening Torque | 1.0…1.2 N•m (9…11 lb•in) | 1.0…1.2 N•m (9…11 lb•in) | ||
| Approx. Ship Weight | 357 g (0.79 lb) | 435 g (0.96 lb) | ||
| Note:Holes are pre-molded to fit 30.5 mm push buttons, such as the Allen-Bradley Bulletin 800T and 800H. | ||||
| ★ Dimensions are not intended to be used for manufacturing purposes. | ||||
For information on legend plates and contact blocks, see Legend Plate Compatibility/Options and Contact Block Compatibility/Options.
Note:Pictures are for illustrative purposes only, depicting suitable legend plates and contact blocks that would fit in and on the Bul. 598/800H push button plastic enclosure. Please reference the appropriate selection guides for more dimensional information.
Approximate Dimensions
General Purpose Enclosures
Dimensions are shown in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.
|
| Cat. No. | Overall Dimension | Inside Dimension | Enclosure Mounting Dimension |
Mounting Plate Mounting Dim. |
|||||||
| H | W | D1 | D2 | A | B | C1 | C2 | E | F | G | |
| 598-BS533 | 130 (5.12) |
80 (3.15) |
50 (1.97) |
35 (1.38) |
120 (4.72) |
70 (2.76) |
46.5 (1.83) |
31.5 (1.24) |
112 (4.41) |
62 (2.44) |
100 (3.94) |
| 598-BS733 | 180 (7.09) |
80 (3.15) |
50 (1.97) |
35 (1.38) |
170 (6.69) |
70 (2.76) |
46.5 (1.83) |
31.5 (1.24) |
162 (6.38) |
62 (2.44) |
150 (5.91) |
| 598-BS933 | 250 (9.84) |
80 (3.15) |
50 (1.97) |
35 (1.38) |
240 (9.45) |
70 (2.76) |
46.5 (1.83) |
31.5 (1.24) |
232 (9.13) |
62 (2.44) |
220 (8.66) |
|
| Cat. No. | Overall Dimension | Inside Dimension | Enclosure Mounting Dimension |
Mounting Plate Mounting Dim. |
||||||||
| H | W | D1 | D2 | A | B | C1 | C2 | E | F | G | J | |
| 598-BS885__ | 190 (7.48) |
190 (7.48) |
98 (3.86) |
30 (1.18) |
174 (6.85) |
174 (6.85) |
94 (3.70) |
26 (1.02) |
165 (6.50) |
165 (6.50) |
120 (4.72) |
120 (4.72) |
| 598-DS885__ | ||||||||||||
| 598-BS1187__ | 280 (11.02) |
190 (7.48) |
98 (3.86) |
80 (3.15) |
266 (10.47) |
170 (6.69) |
94 (3.70) |
76 (2.99) |
255 (10.04) |
165 (6.50) |
210 (8.27) |
120 (4.72) |
| 598-DS1187__ | ||||||||||||
| 598-BS1587__ | 382 (15.04) |
192 (7.56) |
98 (3.86) |
80 (3.15) |
366 (14.41) |
172 (6.77) |
94 (3.70) |
76 (2.99) |
355 (13.98) |
165 (6.50) |
310 (12.20) |
120 (4.72) |
| 598-DS1587__ | ||||||||||||
| 598-BS11115__ | 280 (11.02) |
280 (11.02) |
98 (3.86) |
30 (1.18) |
260 (10.24) |
260 (10.24) |
94 (3.70) |
26 (1.02) |
255 (10.04) |
255 (10.04) |
210 (8.27) |
210 (8.27) |
| 598-DS11115__ | ||||||||||||
| 598-BS13115__ | 341 (13.43) |
280 (11.02) |
100 (3.94) |
30 (1.18) |
320 (12.60) |
260 (10.24) |
96 (3.78) |
26 (1.02) |
316 (12.44) |
256 (10.08) |
270 (10.63) |
210 (8.27) |
| 598-DS13115__ | ||||||||||||
| 598-BS15117__ | 380 (14.96) |
280 (11.02) |
98 (3.86) |
80 (3.15) |
359 (14.13) |
259 (10.20) |
94 (3.70) |
76 (2.99) |
355 (13.98) |
255 (10.04) |
310 (12.20) |
210 (8.27) |
| 598-DS15117__ | ||||||||||||
| 598-BS22115__ | 560 (22.05) |
280 (11.02) |
98 (3.86) |
30 (1.18) |
540 (21.26) |
260 (10.24) |
94 (3.70) |
26 (1.02) |
535 (21.06) |
255 (10.04) |
490 (19.29) |
220 (8.66) |
| 598-DS22115__ | ||||||||||||
| 598-BS22157__ | 560 (22.05) |
380 (14.96) |
148 (5.83) |
30 (1.18) |
540 (21.26) |
360 (14.17) |
144 (5.67) |
26 (1.02) |
535 (21.06) |
355 (13.98) |
490 (19.29) |
311 (12.24) |
| 598-DS22157__ | ||||||||||||
General Purpose External Mounting Dimensions for use with External Mounting Bracket
Dimensions are shown in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.
| Mounting Bracket | |
|
|
| Fig. 1 – Base (Bottom View) | Fig. 2 – Base (Bottom View) |
|
|
| Fig. 3 – Base (Bottom View) | Fig. 4 – Base (Bottom View) |
|
|
| Cat. No. | Figure No. | U | V | X | Y | |
| 598-BS885__ | 598-DS885__ | 1 | — | — | 156 (6.13) | 98 (3.88) |
| 598-BS1187__ | 598-DS1187__ | 2 | — | — | 251 (9.88) | 152 (6.00) |
| 598-BS11115__ | 598-DS11115__ | — | — | 238 (9.38) | 238 (9.38) | |
| 598-BS13115__ | 598-DS13115__ | — | — | 295 (11.63) | 235 (9.25) | |
| 598-BS1587__ | 598-DS1587__ | — | — | 349 (13.78) | 152 (6.00) | |
| 598-BS15117__ | 598-DS15117__ | — | — | 340 (13.38) | 241 (9.50) | |
| 598-BS22115__ | 598-DS22115__ | 3 | 329 (12.94) | 148 (5.81) | 519 (20.44) | 267 (10.50) |
| 598-BS22157__ | 598-DS22157__ | 4 | 292 (11.50) | 195 (7.69) | 519 (20.44) | 340 (13.38) |
Junction Boxes
Dimensions are shown in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.
|
| Cat. No. | Overall Dimension | Inside Dimension | Enclosure Mounting Dimension |
|||||||
| H | W | D1 | D2 | A | B | C1 | C2 | E | F | |
| 598-BS332 | 90 (3.54) |
70 (2.76) |
45 (1.77) |
6.5 (0.26) |
84 (3.31) |
64 (2.52) |
42 (1.79) |
3.5 (0.14) |
78 (3.07) |
39 (1.54) |
| 598-BS632 | 165 (6.50) |
85 (3.35) |
45 (1.77) |
6.5 (0.26) |
159 (6.26) |
79 (3.11) |
42 (1.79) |
3.5 (0.14) |
153 (6.02) |
55 (2.17) |
|
| Cat. No. | Overall Dimension | Inside Dimension | Enclosure Mounting Dimension |
Mounting Plate Mounting Dim. |
|||||||
| H | W | D1 | D2 | A | B | C1 | C2 | E | F | G | |
| 598-BS533 | 130 (5.12) |
80 (3.15) |
50 (1.97) |
35 (1.38) |
120 (4.72) |
70 (2.76) |
46.5 (1.83) |
31.5 (1.24) |
112 (4.41) |
62 (2.44) |
100 (3.94) |
| 598-BS733 | 180 (7.09) |
80 (3.15) |
50 (1.97) |
35 (1.38) |
170 (6.69) |
70 (2.76) |
46.5 (1.83) |
31.5 (1.24) |
162 (6.38) |
62 (2.44) |
150 (5.91) |
| 598-BS933 | 250 (9.84) |
80 (3.15) |
50 (1.97) |
35 (1.38) |
240 (9.45) |
70 (2.76) |
46.5 (1.83) |
31.5 (1.24) |
232 (9.13) |
62 (2.44) |
220 (8.66) |
|
| Cat. No. | Overall Dimension | Inside Dimension | Enclosure Mounting Dimension |
Mounting Plate Mounting Dim. |
||||||||
| H | W | D1 | D2 | A | B | C1 | C2 | E | F | G | J | |
| 598-BS885 | 190 (7.48) |
190 (7.48) |
98 (3.86) |
30 (1.18) |
174 (6.85) |
174 (6.85) |
94 (3.70) |
26 (1.02) |
165 (6.50) |
165 (6.50) |
120 (4.72) |
120 (4.72) |
Push Button Enclosures
Dimensions are shown in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.
|
| Cat. No. | Overall Dimension | Inside Dimension | Enclosure Mounting Dimension |
Mounting Plate Mounting Dim. |
|||||||
| H | W | D1 | D2 | A | B | C1 | C2 | E | F | G | |
| 22.5 mm Push Button Enclosures | |||||||||||
| 598-1PB22__ | 110 (4.33) |
80 (3.15) |
50 (1.97) |
35 (1.38) |
104 (4.09) |
74 (2.91) |
46.5 (1.83) |
31.5 (1.24) |
92 (3.62) |
62 (2.44) |
80 (3.15) |
| 598-2PB22__ | 130 (5.12) |
80 (3.15) |
50 (1.97) |
35 (1.38) |
120 (4.72) |
70 (2.76) |
46.5 (1.83) |
31.5 (1.24) |
112 (4.41) |
62 (2.44) |
100 (3.94) |
| 598-3PB22__ | 180 (7.09) |
80 (3.15) |
50 (1.97) |
35 (1.38) |
170 (6.69) |
70 (2.76) |
46.5 (1.83) |
31.5 (1.24) |
162 (6.38) |
62 (2.44) |
150 (5.91) |
| 598-4PB22__ | 250 (9.84) |
80 (3.15) |
50 (1.97) |
35 (1.38) |
240 (9.45) |
70 (2.76) |
46.5 (1.83) |
31.5 (1.24) |
232 (9.13) |
62 (2.44) |
220 (8.66) |
| 30.5 mm Push Button Enclosures | |||||||||||
| 800H-1HZ4__ | 110 (4.33) |
80 (3.15) |
50 (1.97) |
20 (0.79) |
104 (4.09) |
74 (2.91) |
46.5 (1.83) |
16.5 (0.65) |
92 (3.62) |
62 (2.44) |
80 (3.15) |
| 800H-2HZ4__ | 130 (5.12) |
80 (3.15) |
50 (1.97) |
35 (1.38) |
120 (4.72) |
70 (2.76) |
46.5 (1.83) |
31.5 (1.24) |
112 (4.41) |
62 (2.44) |
100 (3.94) |
| 800H-3HZ4__ | 180 (7.09) |
80 (3.15) |
50 (1.97) |
35 (1.38) |
170 (6.69) |
70 (2.76) |
46.5 (1.83) |
31.5 (1.24) |
162 (6.38) |
62 (2.44) |
150 (5.91) |
| 800H-4HZ4__ | 250 (9.84) |
80 (3.15) |
50 (1.97) |
35 (1.38) |
240 (9.45) |
70 (2.76) |
46.5 (1.83) |
31.5 (1.24) |
232 (9.13) |
62 (2.44) |
220 (8.66) |
Dimensions are shown in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.
Push Button Hole
|
|
|
| 22.5 mm Push Button Hole | 30.5 mm Push Button Hole |
Push Button Hole Spacing
|
|
|
|
|
| Cat. No. | Type | A | B | C | D | E | F |
| 22.5 mm Push Button Enclosure | |||||||
| 598-1PB22G | 1-Hole | 55±0.216 (2.165±0.0085) |
40±0.5 (1.57±0.020) |
— | 50.0±0.191 (1.968±0.0075) |
— | — |
| 598-2PB22G | 2-Hole | — | 40±0.175 (1.57±0.0069) |
— | — | ||
| 598-3PB22G | 3-Hole | — | — | 40 +0.32/-0.18 (1.57 +0.0126/-0.0071) |
— | ||
| 598-4PB22G | 4-Hole | — | — | — | 50±0.216 (1.968±0.0085) |
||
| 30.5 mm Push Button Enclosure | |||||||
| 800H-1HZ4C | 1-Hole | 55±.216 (2.165±0.0085) |
40±0.5 (1.57±0.020) |
— | 46.8±0.191 (1.843±0.0075) |
— | — |
| 800H-2HZ4C | 2-Hole | — | 41.6±0.175 (1.64±0.0069) |
— | — | ||
| 800H-3HZ4C | 3-Hole | — | — | 43.2 +0.32/-0.18 (1.7 +0.0126/-0.0071) |
— | ||
| 800H-4HZ4C | 4-Hole | — | — | — | 54.8±0.216 (2.16±0.0085) |
||