Catalogs > Industrial Controls Catalog > Motor Control, NEMA > General Purpose Enclosures > Bulletin 800H 30.5 mm Push Button Enclosure
Bulletin 800H 30.5 mm Push Button Enclosure
| Introduction |  |
Standards Compliance and Certifications | |
Technical Specifications | |
Product Selection | |
Approximate Dimensions | |
|
|
|
| Cat. No. 800H-1HZ4__ | Cat. No. 800H-2HZ4__ |
| Enclosure | Cat. No. | Pkg. Quantity | Cat. No. | Pkg. Quantity |
| Grey Enclosure | 800H-1HZ4C | 1 | 800H-2HZ4C | 1 |
| Yellow Enclosure | 800H-1HZ4CY | 800H-2HZ4CY | ||
| Outside Dimensions¬ (H x W x D) |
110 mm x 80 mm x 70 mm (4.33 in. x 3.15 in. x 2.76 in.) |
130 mm x 80 mm x 85 mm (5.12 in. x 3.15 in. x 3.35 in.) |
||
| Base Depth | 50 mm (1.97 in.) | 50 mm (1.97 in.) | ||
| Cover Depth | 20 mm (0.79 in.) | 35 mm (1.38 in.) | ||
| Cover Screw Material | Glass-reinforced nylon | Glass-reinforced nylon | ||
| Recommended Tightening Torque | 1.0…1.2 N•m (9…11 lb•in) | 1.0…1.2 N•m (9…11 lb•in) | ||
| Approx. Ship Weight | 213 g (0.47 lb) | 271 g (0.60 lb) | ||
| ¬ Dimensions are not intended to be used for manufacturing purposes. | ||||
|
|
|
| Cat. No. 800H-4HZ4__ | Cat. No. 800H-4HZ4__ |
| Enclosure | Cat. No. | Pkg. Quantity | Cat. No. | Pkg. Quantity |
| Gray Enclosure | 800H-3HZ4C | 1 | 800H-4HZ4C | 1 |
| Yellow Enclosure | 800H-3HZ4CY | 800H-4HZ4CY | ||
| Outside Dimensions¬ (H x W x D) |
180 mm x 80 mm x 85 mm (7.09 in. x 3.15 in. x 3.35 in.) |
250 mm x 80 mm x 85 mm (9.84 in. x 3.15 in. x 3.35 in.) |
||
| Base Depth | 50 mm (1.97 in.) | 50 mm (1.97 in.) | ||
| Cover Depth | 35 mm (1.38 in.) | 35 mm (1.38 in.) | ||
| Cover Screw Material | Glass-reinforced nylon | Glass-reinforced nylon | ||
| Recommended Tightening Torque | 1.0…1.2 N•m (9…11 lb•in) | 1.0…1.2 N•m (9…11 lb•in) | ||
| Approx. Ship Weight | 357 g (0.79 lb) | 435 g (0.96 lb) | ||
| Note:Holes are pre-molded to fit 30.5 mm push buttons, such as the Allen-Bradley Bulletin 800T and 800H. | ||||
| ¬ Dimensions are not intended to be used for manufacturing purposes. | ||||
For information on legend plates and contact blocks, see Legend Plate Compatibility/Options and Contact Block Compatibility/Options.
Note:Pictures are for illustrative purposes only, depicting suitable legend plates and contact blocks that would fit in and on the Bul. 598/800H push button plastic enclosure. Please reference the appropriate selection guides for more dimensional information.
Legend Plate Compatibility/Options
|
|
|
| 22.5 mm Push Button Enclosure | 30.5 mm Push Button Enclosure |
Contact Block Compatibility/Options
|
|
|
| 22.5 mm Push Button Enclosure | 30.5 mm Push Button Enclosure |