Motor Control, IEC

Catalogs > Industrial Controls Catalog > Motor Control, IEC > Mounting System

Mounting System

Accessories

	Description	Width [mm]	Pkg. Qty.	Cat. No.
	Hat (DIN) Rails — MCS Top Hat Rail (Plastic) Slides onto mounting modules and is then fixed with screws. Has notches for MCS components (prevents movement of components when used with vertical busbar).	45	10	141A-AHR45
		54		141A-AHR54
		63		141A-AHR63
	Hat (DIN) Rails — Standard Top Hat Rail (Plastic) Slides onto mounting modules and is then fixed with screws.	72	10	141A-AHS72
		81		141A-AHS81
	Control Plug Pull-apart terminal block allows fast and simple disconnection of control wiring. Snaps on the support of the mobile device rail. Composed of plug holder, male and female parts.	8 Pole	1	141A-APC8
		10 Pole	1	141A-APC10
		12 Pole	1	141A-APC12
	Control Plug Holder Suitable for use with 8-, 10-, or 12-pole control plugs.			141A-APH
	Spacer module — for ISO busbar modules For 9 mm spacing of mounting modules. Connection clips (Cat. No. 141A-AK) are included for attaching the spacer module to the mounting modules.	200	10	141A-AS9S
Cat. No. 141A-AS9S
	Spacer module — for Standard busbar modules For 9 mm spacing of mounting modules. Connection clips (Cat. No. 141A-AK) are included for attaching the spacer module to the mounting modules.	200		141A-AS9B
Cat. No. 141A-AS9B
	Spacer Module — for Mounting modules For spacing of load feeders by 9 mm e.g. for improved cooling. Including connection clips.	228		141A-AS9W
	Connection Clip For joining base of mounting modules.		50	141A-AK
	Micro Switch N.C. Contact Only for ISO Modules. Automatically drops out the contactor when the DAP (Device Adapter Plate) (carrying the starter) is unplugged from the base of the ISO busbar module.		10	141A-AS