Catalogs > Industrial Controls Catalog > Motor Control, IEC > Contactors > Bulletin 100S-C/104S-C Safety Contactors

Bulletin 100S-C/104S-C Safety Contactors

Introduction

Standards Compliance and Certifications

Product Selection

Terminal Markings

Bulletin 100/104-K, 100/104-C, 100/104-D, 100S/104S-C, 100S-D Specifications

Bulletin 100S-C/104S-C Approximate Dimensions

Bulletin 100S/104S Safety Contactors

Mechanically linked N.C. auxiliary contacts
Front-mounted auxiliary contacts:
Gold bifurcated
Permanently fixed
Protective cover to prevent manual operation
Red contact housing foreasy identification
Incorporates IEC 60947-5-1 “Mechanically Linked” symbol
AC and DC operating coils
SUVA Third-Party certification

Bulletin 100S-C/104S-C safety contactors provide mechanically linked positively guided contacts, required in feedback circuits of modern safety applications. The mechanically linked N.C. auxiliary contacts will not change state when a power pole welds. In addition, the gold-plated bifurcated auxiliary contacts are ideally suited for low-energy applications or feedback control circuits with multiple series-connected N.C. auxiliary contacts.

Your order must include: cat. no. of the contactor specified with coil voltage code and, if required, cat. no. of any accessories and/or replacement coils.