Catalogs > Industrial Controls Catalog > Motor Control, IEC > Contactors > Bulletin 100S-C/104S-C Safety Contactors

Bulletin 100S-C/104S-C Safety Contactors

Introduction

Standards Compliance and Certifications

Product Selection

Terminal Markings

Bulletin 100/104-K, 100/104-C, 100/104-D, 100S/104S-C, 100S-D Specifications

Bulletin 100S-C/104S-C Approximate Dimensions

Product Selection

3-Pole AC- and DC-Operated Contactors

I_e [A]		Ratings for Switching AC Motors — AC-2, AC-3, AC-4										Aux. Contacts		Cat. No.¬ T
		3Æ kW (50 Hz)				Hp (60 Hz)
AC-3	AC-1	230V	400V/ 415V	500V	690V	1Æ		3Æ
						115V	230V	200V	230V	460V	575V	N.O.	N.C.
9	32	3	4	4	4	1/2	1-1/2	2	2	5	7-1/2	0	5	100S-C09Ä05BC
												1	4	100S-C09Ä14BC
12	32	4	5.5	5.5	5.5	1/2	2	3	3	7-1/2	10	0	5	100S-C12Ä05BC
												1	4	100S-C12Ä14BC
16	32	5.5	7.5	7.5	7.5	1	3	5	5	10	15	0	5	100S-C16Ä05BC
												1	4	100S-C16Ä14BC
23	32	7.5	11	13	10	2	3	5	7-1/2	15	15	0	5	100S-C23Ä05BC
												1	4	100S-C23Ä14BC
30	65	10	15	15	15	2	5	7-1/2	10	20	25	0	4	100S-C30Ä04BC
												1	4	100S-C30Ä14BC
37	65	11	18.5/20	20	18.5	3	5	10	10	25	30	0	4	100S-C37Ä04BC
												1	4	100S-C37Ä14BC
43	85	13	22	25	22	3	7-1/2	10	15	30	30	0	4	100S-C43Ä04BC
												1	4	100S-C43Ä14BC
60	100	18.5	32	37	32	5	10	15	20	40	50	0	4	‡	100S-C60Ä04BC
												1	4	‡	100S-C60Ä14BC
72	100	22	40	45	40	5	15	20	25	50	60	0	4	‡	100S-C72Ä04BC
												1	4	‡	100S-C72Ä14BC
85	100	25	45	55	45	7-1/2	15	25	30	60	60	0	4	‡	100S-C85Ä04BC
												1	4	‡	100S-C85Ä14BC

¬ For other contact configurations and full product details, please contact your local Rockwell Automation sales office or Allen-Bradley distributor.
T If standard cross-stamped front-mount auxiliary contacts are required, remove the letter "B" before the letter "C" in the cat. no. Example: Cat. No. 100S-C09Ä05BC becomes Cat. No. 100S-C09Ä05C.
‡ Bifurcated front-mount auxiliary contacts on Cat. Nos. 100S-C60…C85 conform to mirror contact performance only.

ÄCoil voltage code and terminal position—see Ä Coil Voltage Code and Terminal Position

Cat. No.
100S-C09Ä05C
Line Side

Cat. No.
100S-C09UÄ05C
Load Side

4-Pole AC- and DC-Operated Contactors

I_e [A]		Ratings for Switching AC Motors										Contact Configuration				Cat. No.¬ ‡
		AC-2, AC-3, AC-4				Hp (60 Hz)
		3Æ kW (50 Hz)T										Main Pole		Auxillary Contacts
AC-3	AC-1	230V	400V/ 415V	500V	690V	1Æ		3Æ T

						115V	230V	200V	230V	460V	575V	N.O.	N.C.	N.O.	N.C.
9	32	3	4	4	4	1/2	1-1/2	2	2	5	7-1/2	4	0	0	4	100S-C09Ä404BC
												3	1	0	4	100S-C09Ä304BC
12	32	4	5.5	5.5	5.5	1/2	2	3	3	7-1/2	10	4	0	0	4	100S-C12Ä404BC
												3	1	0	4	100S-C12Ä304BC
16	32	5.5	7.5	7.5	7.5	1	3	5	5	10	15	4	0	0	4	100S-C16Ä404BC
												3	1	0	4	100S-C16Ä304BC
23	32	7.5	11	13	10	2	3	5	7-1/2	15	15	4	0	0	4	100S-C23Ä404BC
												3	1	0	4	100S-C23Ä304BC

¬ For other contact configurations, please contact your local Rockwell Automation sales office or Allen-Bradley distributor.
T Three-phase ratings only apply to contactors with at least three N.O. power poles.
‡ If standard cross-stamped front-mount auxiliary contacts are required, remove the letter "B" before the letter "C" in the cat. no. Example: Cat. No. 100S-C09Ä404BC becomes Cat. No. 100S-C09Ä404C.

ÄCoil voltage code and terminal position—see Ä Coil Voltage Code and Terminal Position

Reversing AC- and DC-Operated Contactors

3 Main Contacts
Includes Mechanical/Electrical Interlock
Includes Reversing Power Wiring

I_e [A]		Ratings for Switching AC Motors										Aux. Contacts Installed per Contactor		Cat. No.¬ T
		AC-2, AC-3, AC-4
		3Æ kW (50 Hz)				Hp (60 Hz)
AC-3	AC-1	230V	400V/ 415V	500V	690V	1Æ		3Æ
						115V	230V	200V	230V	460V	575V	N.O.	N.C. ‡
9	32	3	4	4	4	1/2	1-1/2	2	2	5	7-1/2	0	6	104S-C09Ä012BC
												1	5	104S-C09Ä210BC
12	32	4	5.5	5.5	5.5	1/2	2	3	3	7-1/2	10	0	6	104S-C12Ä012BC
												1	5	104S-C12Ä210BC
16	32	5.5	7.5	7.5	7.5	1	3	5	5	10	15	0	6	104S-C16Ä012BC
												1	5	104S-C16Ä210BC
23	32	7.5	11	13	10	2	3	5	7-1/2	15	15	0	6	104S-C23Ä012BC
												1	5	104S-C23Ä210BC
30	65	10	15	15	15	2	5	7-1/2	10	20	25	0	5	104S-C30Ä010BC
												1	5	104S-C30Ä210BC
37	65	11	18.5/20	20	18.5	3	5	10	10	25	30	0	5	104S-C37Ä010BC
												1	5	104S-C37Ä210BC
43	85	13	22	25	22	3	7-1/2	10	15	30	30	0	5	104S-C43Ä010BC
												1	5	104S-C43Ä210BC
60	100	18.5	32	37	32	5	10	15	20	40	50	0	5	§	104S-C60Ä010BC
												1	5	§	104S-C60Ä210BC
72	100	22	40	45	40	5	15	20	25	50	60	0	5	§	104S-C72Ä010BC
												1	5	§	104S-C72Ä210BC
85	100	25	45	55	45	7-1/2	15	25	30	60	60	0	5	§	104S-C85Ä010BC
												1	5	§	104S-C85Ä210BC

¬ For other contact configurations, please contact your local Rockwell Automation sales office or Allen-Bradley distributor.
T If standard cross-stamped front-mount auxiliary contacts are required, remove the letter "B" before the letter "C" in the cat. no. Example: Cat. No. 104S-C09Ä05BC becomes Cat. No. 104S-C09Ä05C.
‡ One of the N.C. auxiliary contacts is supplied as part of the mechanical/electrical interlock.
§ Bifurcated front-mount auxiliary contacts on Cat. Nos. 104S-C60…C85 conform to mirror contact performance only.

Ä Coil Voltage Code and Terminal Position

The Cat. No. as listed is incomplete. Select a coil voltage code from the table below to complete the Cat. No. Example: 120V, 60Hz: Cat. No. 100S-C09Ä05BC becomes Cat. No.100S-C09D05BC.

[V]	12	24	32	36	42	48	100	100-110	110	120	127	200	200-220	208	208-240	220-230
AC, 50 Hz	R	K	V	W	X	Y	KP	—	D	P	S	KG	L	—	—	F
AC, 60 Hz	Q	J	—	V	—	X	—	KP	—	D	—	—	KG	H	L	—
AC, 50/60 Hz	–	KJ	—	—	—	KY	KP	—	KD	—	—	KG	KL	—	—	KL

[V]	230	230-240	240	277	347	380	380-400	400	400-415	440	480	500	550	600
AC, 50 Hz	—	VA	T	—	—	—	N	—	G	B	—	M	C	—
AC, 60 Hz	—	—	A	T	I	E	—	—	—	N	B	—	—	C
AC, 50/60 Hz	KF	—	KA	—	—	—	—	KN	—	KB	—	—	—	—

[V]			9	12	24	36	48	60	64	72	80	110	115	125	220	230	250
100S-C09…C43	Standard	DC	ZR	ZQ	ZJ	ZW	ZY	ZZ	ZB	ZG	ZE	ZD	ZP	ZS	ZA	ZF	ZT
	with Integrated Diode		—	—	DJ	—	—	—	—	—	—	—	—	—	—	—	—
	Electronic with Integrated Diode		—	—	EJ	—	—	—	—	—	—	—	—	—	—	—	—
100S-C60…C85	with Integrated Diode		DR	DQ	DJ	DW	DY	DZ	DB	DG	DE	DD	DP	DS	DA	DF	DT

Coil Terminal Position

All contactors are delivered with the coil terminals located on the line side.
For load side coil terminations, insert a “U” prior to the coil voltage code.
Example: Cat. No. 100S-C09UD05BC.

Terminal Markings